SIST EN 301 489-11 V1.2.1:2003

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 11: Specific conditions for terrestrial sound broadcasting service transmitters

Revision to EN 301 489-XX( All parts), in order to remove editorial inconsistencies between specific parts of the multi-part EMC standard and between the specific parts and the general part 1

Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 11. del: Posebni pogoji za oddajnike v storitvi prizemne zvokovne radiofuzije

General Information

• Status: Published
• Publication Date: 28-Feb-2003
• ICS: 33.060.20 - Receiving and transmitting equipment
• ICS: 33.100.01 - Electromagnetic compatibility in general
• ICS: 33.170 - Television and radio broadcasting
• Technical Committee: RES - Radio equipment and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Mar-2003
• Due Date: 01-Mar-2003
• Completion Date: 01-Mar-2003
• Directive: 1999/5/EC - Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity
• Mandate: M/284
• Mandate: T-353
• Ref Project: ETSI EN 301 489-11 V1.2.1 (2002-11) - Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 11: Specific conditions for terrestrial sound broadcasting service transmitters

Relations

• Official Journal Project Relation: SIST EN 301 489-11 V1.3.1:2006 - Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 11: Specific conditions for terrestrial sound broadcasting service transmitters
• Effective Date: 01-Dec-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 301 489-11 V1.2.1:2003
01-marec-2003
Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) -
Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 11.
del: Posebni pogoji za oddajnike v storitvi prizemne zvokovne radiofuzije
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 11: Specific
conditions for terrestrial sound broadcasting service transmitters
Ta slovenski standard je istoveten z: EN 301 489-11 Version 1.2.1
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
33.170 Televizijska in radijska Television and radio
difuzija broadcasting
SIST EN 301 489-11 V1.2.1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 301 489-11 V1.2.1:2003

---------------------- Page: 2 ----------------------

SIST EN 301 489-11 V1.2.1:2003

ETSI EN 301 489-11 V1.2.1 (2002-11)
Candidate Harmonized European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard
for radio equipment and services;
Part 11: Specific conditions for terrestrial sound
broadcasting service transmitters

---------------------- Page: 3 ----------------------

SIST EN 301 489-11 V1.2.1:2003
 2 ETSI EN 301 489-11 V1.2.1 (2002-11)



Reference
REN/ERM-EMC-230-11
Keywords
broadcast, EMC, radio, regulation, testing, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2002.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 301 489-11 V1.2.1:2003
 3 ETSI EN 301 489-11 V1.2.1 (2002-11)
Contents
Intellectual Property Rights.5
Foreword.5
1 Scope.6
2 References.6
3 Definitions symbols and abbreviations .7
3.1 Definitions.7
3.2 Symbols.7
3.3 Abbreviations.7
4 Test conditions.8
4.1 General.8
4.2 Arrangements for test signals .8
4.2.1 Arrangements for test signals at the input of transmitters.8
4.2.2 Arrangements for test signals at the input of transposers, active deflectors, or RF power amplifiers .8
4.2.3 Arrangements for test signals at the output of transmitters, transposers, active deflectors or RF
power amplifiers .9
4.3 RF exclusion bands .11
4.3.1 Transmitter and RF power amplifier exclusion band.11
4.3.1.1 Transmitter and RF power amplifier exclusion band for FM.11
4.3.1.2 Transmitter exclusion band for AM .11
4.3.1.3 Transmitter exclusion band for DRM .11
4.3.1.4 Transmitter and RF power amplifier exclusion band for DAB-T .11
4.3.2 Active deflector exclusion band.11
4.3.3 Transposer exclusion bands .11
4.4 Narrow band responses of receivers.11
4.5 Normal test modulation.12
5 Performance assessment.12
5.1 General.12
5.2 Equipment which can provide a continuous communication link as a broadcasting transmission.12
5.3 Equipment which does not provide a continuous communication link as a broadcasting transmission.12
5.4 Ancillary equipment.12
5.5 Equipment classification.12
6 Performance criteria.13
6.1 Performance criteria for continuous phenomena applied to transmitters (CT).13
6.2 Performance criteria for transient phenomena applied to Transmitters (TT) .14
7 Applicability overview.14
7.1 Emission.14
7.1.1 General.14
7.1.2 Special conditions.15
7.2 Immunity.15
7.2.1 General.15
7.2.2 Special conditions.16
Annex A (informative): Types of broadcasting service equipment covered by the present
document .17
A.1 AM sound broadcasting transmitters.17
A.2 FM sound broadcasting transmitters .17
A.3 DRM sound broadcasting transmitters.17
A.4 DAB-T sound broadcasting transmitters.17
Annex B (informative): Bibliography.18
ETSI

---------------------- Page: 5 ----------------------

SIST EN 301 489-11 V1.2.1:2003
 4 ETSI EN 301 489-11 V1.2.1 (2002-11)
History .19

ETSI

---------------------- Page: 6 ----------------------

SIST EN 301 489-11 V1.2.1:2003
 5 ETSI EN 301 489-11 V1.2.1 (2002-11)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical
Committee Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of
technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Council Directive on the approximation of the laws of
the Member States relating to electromagnetic compatibility ("the EMC Directive") (89/336/EEC [2] as amended) and
Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and
telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive" [3]).
The present document is part 11 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

National transposition dates
Date of adoption of this EN: 8 November 2002
Date of latest announcement of this EN (doa): 28 February 2003
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 August 2003
Date of withdrawal of any conflicting National Standard (dow): 28 February 2006

ETSI

---------------------- Page: 7 ----------------------

SIST EN 301 489-11 V1.2.1:2003
 6 ETSI EN 301 489-11 V1.2.1 (2002-11)
1 Scope
The present document, together with EN 301 489-1 [1], covers the assessment of transmitters, exciters, and any
associated ancillary equipment dedicated for radio broadcasting services, in respect of ElectroMagnetic Compatibility
(EMC).
Technical specifications related to the antenna port emissions and cabinet radiation are not included in the present
document. Such technical specifications are found in the relevant product standards of ETSI for the effective use of the
radio spectrum.
The present document specifies the applicable test conditions, performance assessment and performance criteria for
terrestrial sound broadcasting transmitters and their associated ancillary equipment.
Definitions of the type of broadcast transmitters and exciters covered by the present document are given in annex A.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and EN 301 489-1 [1], the provisions of the present document take precedence.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in EN 301 489-1 [1], except for any specific conditions included in the present document, under which broadcast
service transmitters are typically used.
The present document may not cover those cases where a potential source of interference which is producing
individually repeated transient phenomena or continuous phenomena is permanently present, e.g. a radar site in the near
vicinity. In such a case it may be necessary to use special protection applied to either the source of interference or the
interfered part or both.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
[1] ETSI EN 301 489-1: "Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements".
[2] Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of the Member
States relating to electromagnetic compatibility (EMC Directive).
[3] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[4] EN 55011 (1998): "Industrial, scientific and medical (ISM) radio-frequency equipment - Radio
disturbance characteristics - Limits and methods of measurement".
[5] EN 61000-4-3/A1 (1998): "Electromagnetic compatibility (EMC) - Part 4-3: Testing and
measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test".
ETSI

---------------------- Page: 8 ----------------------

SIST EN 301 489-11 V1.2.1:2003
 7 ETSI EN 301 489-11 V1.2.1 (2002-11)
3 Definitions symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in EN 301 489-1 [1] and the following apply:
broadcasting service: radiocommunication service in which the transmissions are intended for direct reception by the
general public
NOTE: This service may include sound transmission, television transmission, or other types of transmission.
transposer: Tx/Rx (transceiver), which receives an input signal off-air, and re-broadcasts the same signal on a different
frequency
active deflector: Tx/Rx (transceiver, repeater, gap filler), which receives an input signal off-air, and re-broadcasts the
same signal on the same frequency
RF power amplifier: Tx, which comprises an amplifier, declared by the manufacturer to be capable of being connected
to a terrestrial broadcasting antenna system
Exciter/Modulator: low level RF power stage of a broadcasting transmitter
3.2 Symbols
For the purposes of the present document, the following symbols apply:
% percent
A Ampere
Hz Hertz (cycles per second)
6
M Mega (i.e. 10 )
m metre
VA Volt Amperes
W Watt
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AC Alternating Current
AM Amplitude Modulation
BER Bit Error Ratio
CISPR Comité International Spécial des Perturbations Radioélectriques (International Special Committee
On Radio Interference)
DAB-T Digital Audio Broadcast - Terrestrial
DC Direct Current
DRM Digital Radio Mondiale
EMC ElectroMagnetic Compatibility
EUT Equipment Under Test
FM Frequency Modulation
HF High Frequency
IF Intermediate Frequency
LF Low Frequency
MF Medium Frequency
RDS Radio Data System
RF Radio Frequency
Rx Receiver
SNR Signal to Noise Ratio
Tx Transmitter
VHF Very High Frequency
ETSI

---------------------- Page: 9 ----------------------

SIST EN 301 489-11 V1.2.1:2003
 8 ETSI EN 301 489-11 V1.2.1 (2002-11)
4 Test conditions
For the purposes of the present document, the test conditions of EN 301 489-1 [1], clause 4, shall apply as appropriate.
Further provisions related to test conditions for broadcasting service transmitters are specified in the present document.
4.1 General
For emission and immunity tests the test modulation, test arrangements, etc., as specified in the present document,
clauses 4.1 to 4.5, shall apply.
For immunity tests, the output of the Tx shall be monitored as specified in the present document, clause 4.2.3.
4.2 Arrangements for test signals
The provisions of EN 301 489-1 [1], clause 4.2 shall apply.
4.2.1 Arrangements for test signals at the input of transmitters
The provisions of EN 301 489-1 [1], clause 4.2.1 shall apply, with the following modifications.
If the transmitter under test incorporates base-band processing and/or coding equipment (e.g. a RDS encoder for a FM
transmitter), then this equipment shall be active as in normal operation. The manufacturer shall provide reference
encoders and the tests shall be carried out with these in operational mode.
If the transmitter under test does not include integrated base-band processing and/or coding equipment, the
manufacturer shall declare whether the transmitter is designed for operation with or without encoder(s). The
manufacturer shall c
...