SIST EN 61784-3-6:2010
(Main)Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6 (IEC 61784-3-6:2010 )
Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6 (IEC 61784-3-6:2010 )
IEC 61784-3-6:2010(E) specifies a safety communication layer (services and protocol) based on CPF 6 of IEC 61784-1, IEC 61784-2 and IEC 61158 Type 8. It identifies the principles for functional safety communications defined in IEC 61784-3 that are relevant for this safety communication layer. This second edition cancels and replaces the first edition published in 2007. This edition constitutes a technical revision. The main changes with respect to the previous edition are the updates in relation with changes in IEC 61784-3.
Industrielle Kommunikationsnetze - Profile - Teil 3-6: Funktional sichere Übertragung bei Feldbussen - Zusätzliche Festlegungen für die Kommunikationsprofilfamilie 6 (IEC 61784-3-6:2010 )
Réseaux de communication industriels - Partie 3-6: Bus de terrain à sécurité fonctionnelle - Spécifications complémentaires pour le CPF 6 (CEI 61784-3-6:2010 )
La CEI 61784-3:2010 spécifie une couche de communication relative à la sécurité (services et protocole) fondée sur la CPF 6 de la CEI 61784-1, de la CEI 61784-2 et le Type 8 de la CEI 61158. Elle identifie les principes applicables aux communications de sécurité fonctionnelle définies dans la CEI 61784-3, et appropriés à cette couche de communication de sécurité. La présente partie définit les mécanismes de transmission des messages propres à la sécurité entre les participants d'un réseau réparti, en utilisant la technologie de bus de terrain conformément aux exigences de la série CEI 61508 concernant la sécurité fonctionnelle. Ces mécanismes peuvent être utilisés dans diverses applications industrielles, telles que la commande de processus, l'usinage automatique et les machines. Cette seconde édition annule et remplace la première édition publiée en 2007. Elle constitue une révision technique. Les principales modifications par rapport à l'édition précédente sont: mises à jour par rapport aux changements apportés à la CEI 61784-3. La présente version bilingue, correspond à la version anglaise monolingue publiée en 2010-07.
Industrijska komunikacijska omrežja - Profili - 3-6. del: Funkcijska varnost procesnih vodil - Dodatne specifikacije za CPF 6 (IEC 61784-3-6:2010 )
Ta del serije IEC 61784-3 določa varnostno komunikacijsko plast (storitve in protokol) na osnovi CPF 6 IEC 61784-1, IEC 61784-2 in IEC 61158 tipa 8. Določa načela za funkcijsko varnost komunikacij, opredeljena v IEC 61784-3, ki so pomembna za to varnostno komunikacijsko plast. Ta del 1 opredeljuje mehanizme za prenos sporočil, pomembnih za varnost, med udeleženci znotraj porazdeljenega omrežja z uporabo tehnologije vodil v skladu z zahtevami IEC 61508 serije 2 za funkcijsko varnost. Ti mehanizmi se lahko uporabljajo v različnih industrijskih aplikacijah, kot je procesni nadzor, proizvodna avtomatizacija in stroji. Ta del zagotavlja smernice za razvijalce in ocenjevalce skladnih pripomočkov in sistemov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2010
1DGRPHãþD
SIST EN 61784-3-6:2008
Industrijska komunikacijska omrežja - Profili - 3-6. del: Funkcijska varnost
procesnih vodil - Dodatne specifikacije za CPF 6 (IEC 61784-3-6:2010 )
Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses -
Additional specifications for CPF 6 (IEC 61784-3-6:2010 )
Industrielle Kommunikationsnetze - Profile - Teil 3-6: Funktional sichere Übertragung bei
Feldbussen - Zusätzliche Festlegungen für die Kommunikationsprofilfamilie 6 (IEC 61784
-3-6:2010 )
Réseaux de communication industriels - Partie 3-6: Bus de terrain à sécurité
fonctionnelle - Spécifications complémentaires pour le CPF 6 (CEI 61784-3-6:2010 )
Ta slovenski standard je istoveten z: EN 61784-3-6:2010
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61784-3-6
NORME EUROPÉENNE
August 2010
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.05 Supersedes EN 61784-3-6:2008
English version
Industrial communication networks -
Profiles -
Part 3-6: Functional safety fieldbuses -
Additional specifications for CPF 6
(IEC 61784-3-6:2010)
Réseaux de communication industriels - Industrielle Kommunikationsnetze -
Partie 3-6: Bus de terrain à sécurité Profile -
fonctionnelle - Teil 3-6: Funktional sichere Übertragung
Spécifications complémentaires bei Feldbussen -
pour le CPF 6 Zusätzliche Festlegungen
(CEI 61784-3-6:2010) für die Kommunikationsprofilfamilie 6
(IEC 61784-3-6:2010)
This European Standard was approved by CENELEC on 2010-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-3-6:2010 E
Foreword
The text of document 65C/591A/FDIS, future edition 2 of IEC 61784-3-6, prepared by SC 65C, Industrial
networks, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61784-3-6 on 2010-07-01.
This European Standard supersedes EN 61784-3-6:2008.
The main changes with respect to EN 61784-3-6:2008 are listed below:
– updates in relation with changes in EN 61784-3.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2013-07-01
Annex ZA has been added by CENELEC.
__________
- 3 - EN 61784-3-6:2010
Endorsement notice
The text of the International Standard IEC 61784-3-6:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
EN 50170
IEC 61131-2 NOTE Harmonized as EN 61131-2.
IEC 61326-3-1 NOTE Harmonized as EN 61326-3-1.
IEC 61326-3-2 NOTE Harmonized as EN 61326-3-2
IEC 61496 series NOTE Harmonized in EN 61496 series (partially modified).
IEC 61508-1:2010 NOTE Harmonized as EN 61508-1:2010 (not modified).
IEC 61508-4:2010 NOTE Harmonized as EN 61508-4:2010 (not modified).
IEC 61508-5:2010 NOTE Harmonized as EN 61508-5:2010 (not modified).
IEC 61508-6:2010 NOTE Harmonized as EN 61508-6:2010 (not modified).
IEC 61784-5 series NOTE Harmonized in EN 61784-5 series (not modified).
IEC 61800-5-2 NOTE Harmonized as EN 61800-5-2.
ISO 10218-1 NOTE Harmonized as EN ISO 10218-1.
ISO 13849-2 NOTE Harmonized as EN ISO 13849-2.
__________
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60204-1 - Safety of machinery - Electrical equipment of EN 60204-1 -
machines -
Part 1: General requirements
IEC 61131-3 - Programmable controllers - EN 61131-3 -
Part 3: Programming languages
IEC 61158 Series Industrial communication networks - EN 61158 Series
Fieldbus specifications
IEC 61158-2 - Industrial communication networks - EN 61158-2 -
Fieldbus specifications -
Part 2: Physical layer specification and service
definition
IEC 61158-3-8 - Industrial communication networks - EN 61158-3-8 -
Fieldbus specifications -
Part 3-8: Data-link layer service definition -
Type 8 elements
IEC 61158-4-8 - Industrial communication networks - EN 61158-4-8 -
Fieldbus specifications -
Part 4-8: Data-link layer protocol specification
- Type 8 elements
IEC 61158-5-8 2007 Industrial communication networks - EN 61158-5-8 2008
Fieldbus specifications -
Part 5-8: Application layer service definition -
Type 8 elements
IEC 61158-6-8 - Industrial communication networks - EN 61158-6-8 -
Fieldbus specifications -
Part 6-8: Application layer protocol
specification - Type 8 elements
IEC 61508 Series Functional safety of EN 61508 Series
electrical/electronic/programmable electronic
safety-related systems
IEC 61511 Series Functional safety - Safety instrumented EN 61511 Series
systems for the process industry sector
IEC 61784-1 - Industrial communication networks - Profiles - EN 61784-1 -
Part 1: Fieldbus profiles
IEC 61784-2 - Industrial communication networks - Profiles - EN 61784-2 -
Part 2: Additional fieldbus profiles for real-time
networks based on ISO/IEC 8802-3
- 5 - EN 61784-3-6:2010
Publication Year Title EN/HD Year
IEC 61784-3 2010 Industrial communication networks - Profiles - EN 61784-3 2010
Part 3: Functional safety fieldbuses - General
rules and profile definitions
IEC 61784-5-6 - Industrial communication networks - Profiles - EN 61784-5-6 -
Part 5-6: Installation of fieldbuses - Installation
profiles for CPF 6
IEC 61918 - Industrial communication networks - EN 61918 -
Installation of communication networks in
industrial premises
IEC 62061 - Safety of machinery - Functional safety of EN 62061 -
safety-related electrical, electronic and
programmable electronic control systems
ISO 12100-1 - Safety of machinery - Basic concepts, EN ISO 12100-1 -
general principles for design -
Part 1: Basic terminology, methodology
ISO 13849-1 - Safety of machinery - Safety-related parts EN ISO 13849-1 -
of control systems -
Part 1: General principles for design
IEC 61784-3-6 ®
Edition 2.0 2010-06
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Profiles –
Part 3-6: Functional safety fieldbuses – Additional specifications for CPF 6
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XC
ICS 25.040.40; 35.100.05 ISBN 978-2-88910-979-1
– 2 – 61784-3-6 © IEC:2010(E)
CONTENTS
FOREWORD.7
0 Introduction .9
0.1 General .9
0.2 Patent declaration .11
1 Scope.12
2 Normative references .12
3 Terms, definitions, symbols, abbreviated terms and conventions .13
3.1 Terms and definitions .13
3.1.1 Common terms and definitions .13
3.1.2 CPF 6: Additional terms and definitions .18
3.2 Symbols and abbreviated terms.18
3.2.1 Common symbols and abbreviated terms .18
3.2.2 CPF 6: Additional symbols and abbreviated terms .19
3.3 Conventions .20
4 Overview of FSCP 6/7 (INTERBUS™ Safety) .20
4.1 General .20
4.2 Technical overview.20
4.3 Functional Safety Communication Profile 6/7.21
5 General .22
5.1 External documents providing specifications for the profile.22
5.2 Safety functional requirements .22
5.3 Safety measures .22
5.3.1 General .22
5.3.2 Sequence number .23
5.3.3 Time stamp .23
5.3.4 Time expectation .23
5.3.5 Acknowledgement .23
5.3.6 Connection authentication .23
5.3.7 Distinction between safety relevant messages and non-safety
relevant messages – different data integrity assurance system.24
5.3.8 Parameterized shutdown time.24
5.4 Safety communication layer structure .24
5.4.1 Decomposition process.24
5.4.2 Definition of the safety function of the safety communication system .25
5.4.3 Decomposition of the safety function of a safety communication
system into function blocks.26
5.4.4 Assignment of the function blocks to subsystems .27
5.4.5 Safety requirements and safety integrity requirements.30
5.4.6 Specification of the safe state.30
5.4.7 Response to a fault .31
5.4.8 Stop category .33
5.4.9 Safe Transmission.33
5.5 Relationships with FAL (and DLL, PhL) .33
5.5.1 Overview .33
5.5.2 Use of the AR-US service to initiate and parameterize.34
5.5.3 Use of the AR-US service to transmit safety data .35
61784-3-6 © I
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.