SIST ES 204 083 V1.1.1:2025
(Main)Environmental Engineering (EE) - Energy Efficiency measurement methodology and metrics for heterogeneous servers
Environmental Engineering (EE) - Energy Efficiency measurement methodology and metrics for heterogeneous servers
The present document is based upon benchmark for server Energy Efficiency (EE) tool for general and heterogeneous servers [i.6].
The present document specifies:
1) test conditions and product configuration for the assessment of EE of heterogeneous servers using reliable, accurate and reproducible measurement methods;
2) an EE metric to support procurement requirements;
3) requirements for equipment to perform the measurements and analysis;
4) requirements for the measurement process;
5) requirements for the management of the EE metric calculation;
6) operation or run rules to configure, execute, and monitor the testing;
7) documentation and reporting requirements.
The metrics and methods apply to heterogeneous servers with various configurations, including type and count of APAs, CPU, memory, storage and any other add-on hardware expected to be present when deployed.
NOTE: Products whose feature set and intended operation are not addressed by active mode testing parameters are excluded from this evaluation method.
Okoljski inženiring (EE) - Metodologija merjenja energijske učinkovitosti in metrike za heterogene strežnike
General Information
Standards Content (Sample)
Final draft ETSI ES 204 083 V1.0.0 (2025-02)
ETSI STANDARD
Environmental Engineering (EE);
Energy Efficiency measurement methodology
and metrics for heterogeneous servers
2 Final draft ETSI ES 204 083 V1.0.0 (2025-02)
Reference
DES/EE-EEPS46
Keywords
energy efficiency, power, server, sustainability
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
and/or governmental rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2025.
All rights reserved.
ETSI
3 Final draft ETSI ES 204 083 V1.0.0 (2025-02)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 11
3.3 Abbreviations . 11
4 Heterogeneous server product categories and representative product configurations. 12
4.1 General . 12
4.2 Applications and metric applicability . 12
4.3 Product categories . 13
4.3.1 General requirements . 13
4.3.2 Form-factors . 13
4.3.3 Categories . 13
4.4 Product family configuration . 13
4.4.1 General . 13
4.4.2 "High-end" performance configuration . 14
4.4.3 "Low-end" performance configuration . 14
5 Metrics . 15
5.1 Worklets . 15
5.2 Formulae. 15
5.2.1 General . 15
5.2.2 Weightings . 16
6 Test setup . 16
6.1 General . 16
6.2 Environmental conditions . 16
6.2.1 Ambient Temperature . 16
6.2.2 Relative Humidity . 16
6.3 Temperature sensor . 16
6.4 Input power . 17
6.5 Power requirements . 17
6.6 Energy consumption analyser. 17
6.7 Test tool . 18
6.8 Controller system . 18
7 Equipment Under Test. 18
7.1 Configuration . 18
7.2 Test procedure . 20
8 Measurement . 21
8.1 Measurement for active state . 21
8.2 Re-verification and audits . 21
8.3 Measurement for power supply . 22
8.3.1 Measurement for internal power supply . 22
8.3.2 Measurement for test board power supply . 22
8.3.2.1 General . 22
8.3.2.2 Test loads . 22
8.3.2.3 Test leads and wiring . 22
ETSI
4 Final draft ETSI ES 204 083 V1.0.0 (2025-02)
8.3.2.4 Warm up time . 22
8.3.2.5 Power measurements . 23
9 Measurement report . 23
History . 24
ETSI
5 Final draft ETSI ES 204 083 V1.0.0 (2025-02)
List of tables
Table 1: Configuration of EUT .18
Table 2: Test configuration of EUT .20
Table 3: Measurement of active state efficiency .21
Table 4: Measurement of internal power supply .22
ETSI
6 Final draft ETSI ES 204 083 V1.0.0 (2025-02)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI IPR online database.
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ an
...
ETSI STANDARD
Environmental Engineering (EE);
Energy Efficiency measurement methodology
and metrics for heterogeneous servers
2 ETSI ES 204 083 V1.1.1 (2025-04)
Reference
DES/EE-EEPS46
Keywords
energy efficiency, power, server, sustainability
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
and/or governmental rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2025.
All rights reserved.
ETSI
3 ETSI ES 204 083 V1.1.1 (2025-04)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 11
3.3 Abbreviations . 11
4 Heterogeneous server product categories and representative product configurations. 12
4.1 General . 12
4.2 Applications and metric applicability . 12
4.3 Product categories . 13
4.3.1 General requirements . 13
4.3.2 Form-factors . 13
4.3.3 Categories . 13
4.4 Product family configuration . 13
4.4.1 General . 13
4.4.2 "High-end" performance configuration . 14
4.4.3 "Low-end" performance configuration . 14
5 Metrics . 15
5.1 Worklets . 15
5.2 Formulae. 15
5.2.1 General . 15
5.2.2 Weightings . 16
6 Test setup . 16
6.1 General . 16
6.2 Environmental conditions . 16
6.2.1 Ambient Temperature . 16
6.2.2 Relative Humidity . 16
6.3 Temperature sensor . 16
6.4 Input power . 17
6.5 Power requirements . 17
6.6 Energy consumption analyser. 17
6.7 Test tool . 18
6.8 Controller system . 18
7 Equipment Under Test. 18
7.1 Configuration . 18
7.2 Test procedure . 20
8 Measurement . 21
8.1 Measurement for active state . 21
8.2 Re-verification and audits . 21
8.3 Measurement for power supply . 22
8.3.1 Measurement for internal power supply . 22
8.3.2 Measurement for test board power supply . 22
8.3.2.1 General . 22
8.3.2.2 Test loads . 22
8.3.2.3 Test leads and wiring . 22
ETSI
4 ETSI ES 204 083 V1.1.1 (2025-04)
8.3.2.4 Warm up time . 22
8.3.2.5 Power measurements . 23
9 Measurement report . 23
History . 24
ETSI
5 ETSI ES 204 083 V1.1.1 (2025-04)
List of tables
Table 1: Configuration of EUT .18
Table 2: Test configuration of EUT .20
Table 3: Measurement of active state efficiency .21
Table 4: Measurement of internal power supply .22
ETSI
6 ETSI ES 204 083 V1.1.1 (2025-04)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI IPR online database.
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the
...
SLOVENSKI STANDARD
01-september-2025
Okoljski inženiring (EE) - Metodologija merjenja energijske učinkovitosti in metrike
za heterogene strežnike
Environmental Engineering (EE) - Energy Efficiency measurement methodology and
metrics for heterogeneous servers
Ta slovenski standard je istoveten z: ETSI ES 204 083 V1.1.1 (2025-04)
ICS:
33.040.01 Telekomunikacijski sistemi Telecommunication systems
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
ETSI STANDARD
Environmental Engineering (EE);
Energy Efficiency measurement methodology
and metrics for heterogeneous servers
2 ETSI ES 204 083 V1.1.1 (2025-04)
Reference
DES/EE-EEPS46
Keywords
energy efficiency, power, server, sustainability
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
and/or governmental rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2025.
All rights reserved.
ETSI
3 ETSI ES 204 083 V1.1.1 (2025-04)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 11
3.3 Abbreviations . 11
4 Heterogeneous server product categories and representative product configurations. 12
4.1 General . 12
4.2 Applications and metric applicability . 12
4.3 Product categories . 13
4.3.1 General requirements . 13
4.3.2 Form-factors . 13
4.3.3 Categories . 13
4.4 Product family configuration . 13
4.4.1 General . 13
4.4.2 "High-end" performance configuration . 14
4.4.3 "Low-end" performance configuration . 14
5 Metrics . 15
5.1 Worklets . 15
5.2 Formulae. 15
5.2.1 General . 15
5.2.2 Weightings . 16
6 Test setup . 16
6.1 General . 16
6.2 Environmental conditions . 16
6.2.1 Ambient Temperature . 16
6.2.2 Relative Humidity . 16
6.3 Temperature sensor . 16
6.4 Input power . 17
6.5 Power requirements . 17
6.6 Energy consumption analyser. 17
6.7 Test tool . 18
6.8 Controller system . 18
7 Equipment Under Test. 18
7.1 Configuration . 18
7.2 Test procedure . 20
8 Measurement . 21
8.1 Measurement for active state . 21
8.2 Re-verification and audits . 21
8.3 Measurement for power supply . 22
8.3.1 Measurement for internal power supply . 22
8.3.2 Measurement for test board power supply . 22
8.3.2.1 General . 22
8.3.2.2 Test loads . 22
8.3.2.3 Test leads and wiring . 22
ETSI
4 ETSI ES 204 083 V1.1.1 (2025-04)
8.3.2.4 Warm up time . 22
8.3.2.5 Power measurements . 23
9 Measurement report . 23
History . 24
ETSI
5 ETSI ES 204 083 V1.1.1 (2025-04)
List of tables
Table 1: Configuration of EUT .18
Table 2: Test configuration of EUT .20
Table 3: Measurement of active state efficiency .21
Table 4: Measurement of internal power supply .22
ETSI
6 ETSI ES 204 083 V1.1.1 (2025-04)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI IPR online database.
Pursuant to the ETSI Dire
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.