SIST EN 14081-1:2006/kprA1:2010
(Amendment)Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
This European Standard specifies the requirements for visual and machine graded structural timber with rectangular cross-sections shaped by sawing, planing or other methods, and having deviations from the target sizes corresponding to EN 336.
This European Standard covers structural rectangular timber, untreated or treated against biological attack.
This European Standard does not cover timber treated by fire retardant products.
This European Standard identifies as a minimum the characteristics for which limits shall be given in visual grading rules.
Finger jointed timber is not covered in this European Standard.
Holzbauwerke - Nach Festigkeit sortiertes Bauholz für tragende Zwecke mit rechteckigem Querschnitt - Teil 1: Allgemeine Anforderungen
Structures en bois - Bois de structure de section rectangulaire classé pour sa résistance - Partie 1: Exigences générales
Lesene konstrukcije - Razvrščanje konstrukcijskega lesa pravokotnega prečnega prereza po trdnosti - 1. del: Splošne zahteve
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 14081-1:2006/kprA1:2010
01-november-2010
/HVHQHNRQVWUXNFLMH5D]YUãþDQMHNRQVWUXNFLMVNHJDOHVDVID]RQVNLPLNRVLSR
WUGQRVWLGHO 6SORãQH]DKWHYH
Timber structures - Strength graded structural timber with rectangular cross section -
Part 1: General requirements
Holzbauwerke - Nach Festigkeit sortiertes Bauholz für tragende Zwecke mit
rechteckigem Querschnitt - Teil 1: Allgemeine Anforderungen
Structures en bois - Bois de structure de section rectangulaire classé pour sa résistance
- Partie 1: Exigences générales
Ta slovenski standard je istoveten z: EN 14081-1:2005/FprA1
ICS:
79.040 Les, hlodovina in žagan les Wood, sawlogs and sawn
timber
91.080.20 Lesene konstrukcije Timber structures
SIST EN 14081-1:2006/kprA1:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 14081-1:2006/kprA1:2010
---------------------- Page: 2 ----------------------
SIST EN 14081-1:2006/kprA1:2010
EUROPEAN STANDARD
FINAL DRAFT
EN 14081-1:2005
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
August 2010
ICS 79.040
English Version
Timber structures - Strength graded structural timber with
rectangular cross section - Part 1: General requirements
Structures en bois - Bois de structure à section Holzbauwerke - Nach Festigkeit sortiertes Bauholz für
rectangulaire classé pour sa résistance - Partie 1: tragende Zwecke mit rechteckigem Querschnitt - Teil 1:
Exigences générales Allgemeine Anforderungen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 124.
This draft amendment A1, if approved, will modify the European Standard EN 14081-1:2005. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14081-1:2005/FprA1:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 14081-1:2006/kprA1:2010
EN 14081-1:2005/FprA1:2010 (E)
Contents Page
Foreword .3
1 Modification to the French title .4
2 Modification to Clause 3, “Terms and definitions” .4
3 Modifications to Clause 2, “Normative references” .4
4 Modifications to Clause 7, “Marking” .4
7.1 General .4
7.2 Information either on the timber or on its package .5
7.3 Information in the documents accompanying either the timber or package of such timber .5
5 Modifications to ZA.3, “CE marking” .6
ZA.3.1 General .6
ZA.3.2 Simplified CE marking .6
ZA.3.3 Complete CE marking .7
2
---------------------- Page: 4 ----------------------
SIST EN 14081-1:2006/kprA1:2010
EN 14081-1:2005/FprA1:2010 (E)
Foreword
This document (EN 14081-1:2005/FprA1:2010) has been prepared by Technical Committee CEN/TC 124
“Timber structures”, the secretariat of which is held by AFNOR.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
This amendment introduces a new definition for package in Clause 3 and replaces the provisions in Clause 7
on marking and in ZA.3 on CE marking.
3
---------------------- Page: 5 ----------------------
SIST EN 14081-1:2006/kprA1:2010
EN 14081-1:2005/FprA1:2010 (E)
1 Modification to the French title
Replace the second element of the French title with:
"Bois de structure à section rectangulaire classé pour sa résistance".
2 Modification to Clause 3, “Terms and definitions”
Add the following new term and definition:
"3.15
package
timber of one grade, one species or species combination, and one cross section size or of multiple sizes
where the timber is to be used for one structure, graded in one working shift to be delivered to one customer".
3 Modifications to Clause 2, “Normative references”
Add the following references:
"EN 335-1, Durability of wood and wood-based products — Definition of use classes — Part 1: General
EN 335-2, Durability of wood and wood-based products — Definition of use classes — Part 2: Application to
solid wood".
Replace "EN 14081-4:2005" with "EN 14081-4:2009" in Clause 2 and 5.3.3.
Replace "prEN 15228" with "EN 15228" in Clause 2 and 5.4.
Replace "(ISO 3166-1:1997)" with "(ISO 3166-1:2006)".
4 Modifications to Clause 7, “Marking”
Replace the existing 7.1, 7.2 and 7.3, except Table 4, with the following new 7.1, 7.2 and 7.3: "
7.1 General
Two methods for marking exist:
a) Method A (i.e. individual piece marking):
Each piece of graded structural timber shall be clearly and indelibly marked to provide the information
given in 7.2. In addition, the information listed in 7.3 together with those in 7.2 shall be given in a
commercial document, accompanying each package of such timber.
b) Method B (i.e. package marking):
Each package of graded structural timber shall be clearly and indelibly marked with a label attached to
the package to provide the information given in 7.2. In addition, the information listed in 7.3 together with
those in 7.2 shall be given in a commercial document, accompanying each package of such timber.
Visually strength graded structural timber shall be marked according to either Method A or Method B.
NOTE 1 National regulations may exist which limit the method to be used.
4
---------------------- Page: 6 ----------------------
SIST EN 14081-1:2006/kprA1:2010
EN 14081-1:2005/FprA1:2010 (E)
Machine strength graded timber shall be marked according to Method A.
NOTE 2 For information on CE marking see ZA.3.2 and ZA.3.3.
7.2 Information either on the timber or on its package
The following information shall be given on the graded structural timber or on the package of such timber:
a) name or identifying mark of the manufacturer;
NOTE 1 Registered address of the manufacturer may also be added.
b) parameters that describe the timber and intended use:
grade and grading standard, where visually graded;
NOTE 2 This information should be read in conjunction with that given below under c).
letter “M”, where machine graded;
words “DRY GRADED” for dry-graded timber, where relevant (see 3.4);
NOTE 3 An alternative wording may be used provided that it relates to the timber dried down to at least the level given
in 3.4 and that it is clearly defined in the commercial document, accompanying the timber.
identification code number, which identifies product from the accompanying documents;
specific end use of timber if relevant (see 5.1.4 and 5.2.3);
c) performance of some of the characteristics of the timber, i.e. modulus of elasticity (mean), bending
strength, compressive strength, tensile strength, shear strength, declared by reference to a single
strength class or strength grade:
for visually graded timber, the strength grade may be assigned to a strength class, see
EN 1912:2004+A4;
for machine graded timber, the strength class or grade shall be taken from EN 14081-4.
d) letters " PT" where the timber has been treated against biological attack.
NOTE 4 Where ZA.3 covers the same information as this clause, the requirements of this clause are met.
7.3 Information in the documents accompanying either the timber or package of such
timber
The following information, in addition to that specified in 7.2, shall be given in the commercial documents,
accompanying the timber or a package of such timber:
NOTE 1 One accompanying document may contain information on more than one package provided that all relevant
information, applicable to all such packages is given.
a) identification code number, which refers to the relevant products;
b) number of this European Standard, and the year of its publication (i.e. EN 14081-1:2005+A1:2010);
c) description of the timber and its intended use, declared as:
5
---------------------- Page: 7 ----------------------
SIST EN 14081-1:2006/kprA1:2010
EN 14081-1:2005/FprA1:2010 (E)
species code as specified either:
• in Table B.1, in accordance with EN 13556, if single species, or
• in Table 4, if species combination;
code identifying the country or region of origin in accordance with EN ISO 3166-1, when machine
graded;
d) durability performance (i.e. resistance to biological organisms) of the timber:
when without preservative treatment (i.e. natural durability): declared as classification against wood
destroying fungi, insects, termites and marine borers, according to EN 350-2, or
when with preservative treatment in accordance with EN 15228: indication “PT” and declared as “use
class” in accordance with EN 335-1 and EN 335-2, together with type of preservative, critical
retention value and penetration class.
NOTE 2 Where ZA.3 covers the same information as this clause, the requirements of this clause are met.".
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.