SIST EN ISO 9773:2000/A1:2003

Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens (ISO 9773:1998/Amd 1:2003)

Kunststoffe - Bestimmung des Brandverhaltens von dünnen, biegsamen, vertikal ausgerichteten Probekörpern in Kontakt mit einer kleinen Zündquelle - Änderung 1: Probekörper (ISO 9773:1998/Amd 1:2003)

Plastiques - Détermination du comportement au feu d'éprouvettes minces verticales souples au contact d'une petite flamme comme source d'allumage - Amendement 1: Eprouvettes (ISO 9773:1998/Amd 1:2003)

Polimerni materiali - Določanje obnašanja pri gorenju pokončno postavljenih, tankih upogljivih preskušancev pri stiku z majhnim plamenom (ISO 9773:1998/Dopolnilo 1:2003)

General Information

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 13.220.40 - Ignitability and burning behaviour of materials and products
• ICS: 83.080.01 - Plastics in general
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: EN ISO 9773:1998/A1:2003 - Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens (ISO 9773:1998/Amd 1:2003)

Relations

• Amends: SIST EN ISO 9773:2000 - Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9773:2000/A1:2003
01-december-2003
3ROLPHUQLPDWHULDOL'RORþDQMHREQDãDQMDSULJRUHQMXSRNRQþQRSRVWDYOMHQLK
WDQNLKXSRJOMLYLKSUHVNXãDQFHYSULVWLNX]PDMKQLPSODPHQRP,62
'RSROQLOR
Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact
with a small-flame ignition source - Amendment 1: Specimens (ISO 9773:1998/Amd
1:2003)
Kunststoffe - Bestimmung des Brandverhaltens von dünnen, biegsamen, vertikal
ausgerichteten Probekörpern in Kontakt mit einer kleinen Zündquelle - Änderung 1:
Probekörper (ISO 9773:1998/Amd 1:2003)
Plastiques - Détermination du comportement au feu d'éprouvettes minces verticales
souples au contact d'une petite flamme comme source d'allumage - Amendement 1:
Eprouvettes (ISO 9773:1998/Amd 1:2003)
Ta slovenski standard je istoveten z: EN ISO 9773:1998/A1:2003
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 9773:2000/A1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9773:2000/A1:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 9773:2000/A1:2003
EUROPEAN STANDARD
EN ISO 9773:1998/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2003
ICS 13.220.40; 83.080.01
English version
Plastics - Determination of burning behaviour of thin flexible
vertical specimens in contact with a small-flame ignition source -
Amendment 1: Specimens (ISO 9773:1998/Amd 1:2003)
Plastiques - Détermination du comportement au feu Kunststoffe - Bestimmung des Brandverhaltens von
d'éprouvettes minces verticales souples au contact d'une dünnen, biegsamen, vertikal ausgerichteten Probekörpern
petite flamme comme source d'allumage - Amendement 1: in Kontakt mit einer kleinen Zündquelle - Änderung 1:
Eprouvettes (ISO 9773:1998/Amd 1:2003) Probekörper (ISO 9773:1998/Amd 1:2003)
This amendment A1 modifies the European Standard EN ISO 9773:1998; it was approved by CEN on 24 July 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9773:1998/A1:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9773:2000/A1:2003
EN ISO 9773:1998/A1:2003 (E)
CORRECTED 2003-11-05
Foreword
This document (EN ISO 9773:1998/A1:2003) has been prepared by Technical Committee
ISO/TC 61 "Plastics" in collaboration with Technical Committee CEN/TC 249 "Plastics", the
secretariat of which is held by IBN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by March 2004, and conflicting national
standards shall be withdrawn at the latest by March 2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 9773:1998 has been approved by CEN as EN ISO 9773:1998/A1:2003 without
any modifications.
2

---------------------- Page: 4 ----------------------

SIST EN ISO 9773:2000/A1:2003


INTERNATIONAL ISO
STANDARD 9773
Second edition
1998-03-01
AMENDMENT 1
2003-09-15
Plastics — Determination of burning
behaviour of thin flexible vertical
specimens in contact with a small-flame
ignition source
AMENDMENT 1: Specimens
Plastiques — Détermination du comportement au feu d'éprouvettes
minces verticales souples au contact d'une petite flamme comme
source d'allumage
AMENDEMENT 1: Éprouvettes




Reference number
ISO 9773:1998/Amd.1:2003(E)
©
ISO 2003

---------------------- Page: 5 ----------------------

SIST EN ISO 9773:2000/A1:2003
ISO 9773:1998/Amd.1:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electroni
...