iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13149-4:2005

(Main)

Public transport - Road vehicle scheduling and control systems - Part 4: General application rules for CANopen transmission buses

Public transport - Road vehicle scheduling and control systems - Part 4: General application rules for CANopen transmission buses

This document specifies the choice and the general application's rules of an onboard data transmission bus between the different equipment for service operations and monitoring of the fleet. This applies to equipment installed onboard buses, trolleybuses and tramways only as part of a bus fleet operation. It excludes tramways when they are operated as part of a train, subway or metro operation. This equipment includes operation aid systems, automatic passenger information systems, fare collection systems, etc.
The equipment directly related to the safety-related functioning of the vehicle (propulsion management, brake systems, door opening systems, etc.) is excluded from the scope of the present document and are dealt with in other standardisation bodies.
For the described application two bus systems are standardised. Part 1 to part 3 describes the WORLDFIP bus system and part 4 to part 6 describes the CANopen bus system. There is no ranking between the two bus systems.
This document covers the link between equipments inside a single vehicle. Although it could be applied to multiple vehicles, this application is not explicitly covered by this document.
Part 4 of this document (this document) specifies the CANopen-based network. This specification describes the general architecture in terms of hierarchical layers according to the ISO reference model for Open Systems Interconnection (OSI) specified in ISO 7498.
Part 5 of this document specifies in detail the connectors and the connector pin assignment and the cabling.
Part 6 of this document specifies in detail the application profiles for the virtual devices in public transport

Öffentlicher Verkehr - Planungs- und Steuerungssysteme für Straßenfahrzeuge - Teil 4: Allgemeine Anwendungsregeln für den CANopen Übertragungsmodus

Transports publics - Systemes d'ordonnancement et de contrôle des véhicules routiers - Partie 4: Regles générales d'application des bus de transmission CANopen

Javni prevoz – Sistemi za časovno razporejanje in nadzor cestnih vozil – 4. del: Splošna aplikacijska pravila za prenosna vodila CANopen

General Information

Status
Withdrawn
Publication Date
31-Dec-2004
Withdrawal Date
17-May-2021
ICS
03.220.20 - Road transport
35.240.60 - IT applications in transport
43.040.15 - Car informatics. On board computer systems
Technical Committee
ITC - Information technology
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
14-May-2021
Due Date
06-Jun-2021
Completion Date
18-May-2021
Ref Project
EN 13149-4:2004 - Public transport - Road vehicle scheduling and control systems - Part 4: General application rules for CANopen transmission buses

Relations

Replaces
SIST ENV 13149-4:2003 - Public transport - Road vehicle scheduling and control systems - Part 4: General application rules for CANopen transmission busses
Effective Date
01-Jan-2005

Buy Standard

EN 13149-4:2005EN 13149-4:2005
PreviousNext
Standard
EN 13149-4:2005
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Öffentlicher Verkehr - Planungs- und Steuerungssysteme für Straßenfahrzeuge - Teil 4: Allgemeine Anwendungsregeln für den CANopen ÜbertragungsmodusTransports publics - Systemes d'ordonnancement et de contrôle des véhicules routiers - Partie 4: Regles générales d'application des bus de transmission CANopenPublic transport - Road vehicle scheduling and control systems - Part 4: General application rules for CANopen transmission buses43.040.15Car informatics. On board computer systems35.240.60Uporabniške rešitve IT v transportu in trgoviniIT applications in transport and trade03.220.20Cestni transportRoad transportICS:Ta slovenski standard je istoveten z:EN 13149-4:2004SIST EN 13149-4:2005en01-januar-2005SIST EN 13149-4:2005SLOVENSKI
STANDARDSIST ENV 13149-4:20031DGRPHãþD



SIST EN 13149-4:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13149-4September 2004ICS 35.240.60; 43.080.20; 45.060.01Supersedes ENV 13149-4:2002
English versionPublic transport - Road vehicle scheduling and control systems -Part 4: General application rules for CANopen transmissionbusesTransports publics - Systèmes d'ordonnancement et decontrôles des véhicules routiers - Règles généralesd'application des bus de transmission CANopenÖffentlicher Verkehr - Planungs- und Steuerungssystemefür Straßenfahrzeuge - Teil 4: AllgemeineAnwendungsregeln für den CANopen ÜbertragungsmodusThis European Standard was approved by CEN on 21 June 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13149-4:2004: ESIST EN 13149-4:2005



EN 13149-4:2004 (E) 2 Contents page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Basic concepts.6 4.1 General.6 4.2 Topology.6 4.3 CANopen performance.6 4.4 CANopen – OSI reference.6 5 Requirements.8 5.1 Physical layer.8 5.2 Data link layer.8 5.3 Application layer.8 5.4 Virtual device profiles.8 Bibliography.9
SIST EN 13149-4:2005



EN 13149-4:2004 (E) 3 Foreword This document (EN 13149:2004) has been prepared by Technical Committee CEN/TC 278 "Road Transport and Traffic Telematics", the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2005, and conflicting national standards shall be withdrawn at the latest by March 2005. This document supersedes ENV 13149-4:2002. This document is part of the following series of standards related to road vehicle scheduling and control systems: EN 13149-1, Public transport - Road vehicle scheduling and control systems - Part 1: WORLDFIP definition and application rules for onboard data transmission EN 13149-2, Public transport - Road vehicle scheduling and control systems - Part 2: WORLDFIP cabling specifications prENV 13149-3, Public transport - Road vehicle scheduling and control systems - Part 3: WORLDFIP message content EN 13149-4, Public transport - Road vehicle scheduling and control systems - Part 4: General application rules for CANopen transmission busses EN 13149-5, Public transport - Road vehicle scheduling and
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15876:2023(Main)
Electronic fee collection - Conformity evaluation of on-board and roadside equipment to EN 15509
EN 15876:2023

It defines the test suite structure and the test purposes for conformity evaluation of on-board and roadside equipment designed for compliance with the requirements set up in EN 15509.

  • Standard
    122 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    147 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17249-5:2022(Main)
Intelligent transport systems - eSafety - Part 5: eCall for UNECE category L1 and L3 powered two-wheeled vehicles
CEN/TS 17249-5:2022

In respect of 112-eCall (operating requirements defined in EN 16072), this document defines adaptations to eCall specifications defined in EN 16072 and other related documents to enable the provision of eCall for Powered Two Wheel Vehicles.
As with the existing provisions for eCall for Category M1/N1 vehicles, these are specified within the paradigm of being OEM fit equipment supplied with new vehicles.
For the purposes of the present document, the P2WV ‘L’ categories, as defined in Directive 2002/24/EC, Regulation (EU) No 168/2013, UNECE and as referenced/specified in EN 15722 apply.
This document includes only the requirements for Category L1 and L3 P2WV (vehicle based) with the exception of L1e-A (powered cycle), although other documents may subject other ‘L’ subcategories to use this document. Other Technical Specifications may be prepared for other UNECE category ‘L’ variants.
This document is a revision of CEN/TS 17249-5:2019 based on results achieved in sAFE project (sub-activity 3.5) [11] to obtain a specification allowing a more practical implementation of eCall for P2WVs.
The specifications herein relate only to the provision of pan-European eCall, and does not provide specifications for third party service provision of eCall. Other than in the 112-eCall paradigm, which involves a direct call from the vehicle to the most appropriate PSAP, third party service provision involves the support of an intermediary third party service provider before the call is forwarded to the PSAP.
NOTE   The provision of eCall for vehicles via the aftermarket (post sales and registration), and the operational requirements for any such aftermarket solution. will be the subject of other work, that will use the specifications of this document as a principle reference point.

  • Technical specification
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13143-1:2021(Main)
Electronic fee collection - Evaluation of onboard and roadside equipment for conformity to ISO 12813 - Part 1: Test suite structure and test purposes (ISO 13143-1:2020)
EN ISO 13143-1:2020

This document specifies the test suite structure (TSS) and test purposes (TPs) for evaluating the
conformity of on-board equipment (OBE) and roadside equipment (RSE) to ISO 12813.
It provides a basis for conformance tests for dedicated short-range communication (DSRC) OBE and
RSE to support interoperability between different equipment supplied by different manufacturers.
ISO 12813 defines requirements on the compliance check communication (CCC) interface level, but
not for the RSE or OBE internal functional behaviour. Consequently, tests regarding OBE and/or RSE
functional behaviour remain outside the scope of this document.

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 13149-9:2020(Main)
Public transport - Road vehicle scheduling and control systems - Part 9: Time service
CEN/TS 13149-9:2020

The CEN 13149 series of products concerns on-board data communication systems on public transport vehicles. This series provides for data services that enable open and managed sharing of relevant information.
This document, being Part 9 of the series, specifies a time publication, enabling all on-vehicle services to share a common understanding of current time, based on a suitable agreed master network clock. It covers:
-   the functional scope, i.e. which data the service provides, why, when and how often.
-   the transport protocol, i.e. how the data are transmitted.
-   the service publication, i.e. how the service can be found by other modules or applications
-   the structure of the data, i.e. how the data are structured and how the data elements are named.
This document implements the service framework described in FprCEN/TS 13149-7.

  • Technical specification
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 13149-10:2020(Main)
Public transport - Road vehicle scheduling and control systems - Part 10: Location service
CEN/TS 13149-10:2020

The CEN 13149 series of products concerns on-board data communication systems on public transport vehicles. This series provides for data services that enable open and managed sharing of relevant information.
This document, being Part 10 of the series, specifies a location publication, enabling all on-vehicle services to share a common understanding of the location and orientation of the vehicle, based on inputs taken from global navigational satellite systems (GNSS) such as GPS and Galileo. It covers:
-   the functional scope, i.e. which data the service provides, why, when and how often;
-   the transport protocol, i.e. how the data are transmitted;
-   the service publication, i.e. how the service can be found by other modules or applications;
-   the structure of the data, i.e. how the data are structured and how the data elements are named.
This document implements the service framework described in FprCEN/TS 13149-7.

  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 13149-11:2020(Main)
Public transport - Road vehicle scheduling and control systems - Part 11: Vehicle platform interface service
CEN/TS 13149-11:2020

The CEN 13149 series of products concerns on-board data communication systems on public transport vehicles. This series provides for data services that enable open and managed sharing of relevant information.
This document, being Part 11 of the series, specifies a publication service for data provided by the vehicle platform, enabling all on-vehicle services to share a common understanding of the operational activity of the vehicle, based on inputs taken from chassis systems such as the J1939 CAN bus. It covers:
-   the functional scope, i.e. which data the service provides, why, when and how often.
-   the transport protocol, i.e. how the data are transmitted.
-   the service publication, i.e. how the service can be found by other modules or applications
-   the structure of the data, i.e. how the data are structured and how the data elements are named.
This document implements the service framework described in FprCEN/TS 13149-7.

  • Technical specification
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 13149-7:2020(Main)
Public transport - Road vehicle scheduling and control systems - Part 7: System and network architecture
CEN/TS 13149-7:2020

This document specifies the general rules for an on-board data communication system between the different systems that may be used within public transport vehicles, based on the Internet Protocol (IPv4, [3] and IPv6, [4]). This includes operational support systems, passenger information systems, fare collection systems, etc.
This document describes:
-   the requirements for an on board IP network;
-   the overview architecture and components for an IP based on-board network;
-   the modular structure of the network architecture;
-   the Service Oriented Architecture (SOA) approach, and approach to defining services.
Systems directly related to the safe operation of the vehicle (including propulsion management, brake systems, door opening systems) are excluded from the scope of this document and are dealt with in other standardization bodies. However, the architecture described in this document may be used for support services such as safety information messages. Interfaces to safety-critical systems should be provided through dedicated gateways with appropriate security provisions; for the purposes of this document, these are regarded as simply external information sources.
This document is designed primarily for vehicles with a fixed primary structure, where networks can be installed on a permanent basis and the system configuration task consists largely of the integration, adjustment or removal of the functional end systems that produce and/or consume data. Public transport vehicles consisting of units linked temporarily for operational purposes (specifically, trains in which individual engines, cars or consists are routinely connected and disconnected) require additional mechanisms to enable the communications network itself to reconfigure. Such mechanisms are provided through other standards, notably the IEC 61375 series [5].

  • Technical specification
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17249-4:2019(Main)
Intelligent transport systems - eSafety - Part 4: eCall for UNECE Category T, R, S agricultural/forestry vehicles
CEN/TS 17249-4:2019

In respect of 112-eCall (operating requirements defined in EN 16072), this document defines additional
specifications for the provision of eCall for agricultural/forestry vehicles.
As with the existing provisions for eCall for Category M1/N1 vehicles, these systems are specified within
the paradigm of being OEM fit equipment supplied with new vehicles.
NOTE 1 The provision of eCall for vehicles via the aftermarket (post sale and registration) will be the subject of
other work, and in respect of the operational requirements for any such aftermarket solutions for
agricultural/forestry vehicles, will use the specifications of this Technical Specification as a principle reference
point.
NOTE 2 The 112-eCall paradigm involves a direct call from the vehicle to the most appropriate PSAP. (Third
party service provision by comparison, involves the support of an intermediary third party service provider before
the call is forwarded to the PSAP). The specifications herein relate only to the provision of 112-eCall or IMS-112-
eCall, and do not provide specifications for third party service provision of eCall.

  • Technical specification
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17249-6:2019(Main)
Intelligent transport systems - eSafety - Part 6: eCall for UNECE Category L2, L4, L5, L6 and L7 tricycles and quadricycles
CEN/TS 17249-6:2019

In respect of 112-eCall (operating requirements defined in EN 16072), this document defines adaptations to eCall specifications defined in EN 16072 and other related Standards to enable the provision of eCall for tricycle and quadricycle vehicles (vehicle centred) UNECE (UNECE ECE/TRANS/WP.29/78/Rev.4) vehicle categories L2, L4, L5, L6, L7. As with the existing provisions for eCall for Category M1/N1 vehicles, these are specified within the paradigm of being OEM fit equipment supplied with new vehicles.
This document includes only the requirements for Category L2, L4, L5, L6 and L7 Tricycles and Quadricycles (vehicle centred).
NOTE 1   The 112-eCall paradigm involves a direct call from the vehicle to the most appropriate PSAP (Third party service provision by comparison, involves the support of an intermediary third party service provider before the call is forwarded to the PSAP). The specifications herein relate only to the provision of 112-eCall or IMS-112-eCall, and do not provide specifications for third party service provision of eCall.
NOTE 2   Some of the elements of this document will require further in-depth analysis before they can be implemented in a European Standard. The current state of development on these elements justifies their inclusion in this document, but further assessment and analysis might require an amendment before implementation into a European Standard.

  • Technical specification
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17249-2:2019(Main)
Intelligent transport systems - eSafety - Part 2 : eCall for HGVs and other commercial vehicles
CEN/TS 17249-2:2018

The Scope of this document is limited to the provision of eCall from a commercial vehicle prime mover /rigid body truck designed for conveying cargo (UNECE Category N).
Within the context of 112-eCall (operating requirements defined in EN 16072), this document defines specifications for the provision of 112-eCall for regulated commercial vehicles, including rigid body trucks and variants thereof, prime mover and trailer combinations (sometimes called "semi’s", road trains [one prime mover with multiple trailers]) and other regulated commercial vehicles (for example vans carrying medical supplies or radioactive material).
As with the existing provisions for 112-eCall for Category M1/N1 vehicles, these are specified within the paradigm of being OEM fit equipment supplied with new vehicles.
The work of CEN/TS 16405 is adopted and extended in this document. (A revised edition of CEN/TS 16405(:2018) will remain the principal reference document for the content and definition of the commercial vehicle optional additional data set.)
This document specifies the requirements for the use of 112-eCall by a commercial vehicle prime mover /rigid body truck and determines circumstances where it is appropriate to additionally provide new optional additional data as determined in CEN/TS 16405(:2018 or later) as Schema C for use in a packet switched environment which is not constrained by the 140 byte limit.
Unless superseded by European Regulation on some future date, all data schemas specified in CEN/TS 16405 are "Optional Additional Data" (OAD) concepts, as enabled in accordance with EN 15722 as part of the minimum set of data. As OAD they, and the elements within them, are, by definition, "optional" with use at the discretion of the operator of the vehicle.
NOTE 1   The provision of eCall from IVS located within trailers is not included in this document.
NOTE 2   The provision of eCall for vehicles via the aftermarket (post sale and registration) will be the subject of other work, and in respect of the operational requirements for any such aftermarket solutions for commercial vehicles, will use this document as a principle reference point.
NOTE 3   The 112-eCall paradigm involves a direct call from the vehicle to the most appropriate PSAP. (Third party service provision by comparison, involves the support of an intermediary third party service provider before the call is forwarded to the PSAP). The specifications herein relate only to the provision of 112-eCall or IMS-112-eCall, and do not provide specifications for third party service provision of eCall, although in the case of 112-eCall for commercial vehicles, links to third party provision of service aspects (such as cargo contents) may be required.

  • Technical specification
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day