SIST EN 13631-10:2004

Explosives for civil uses - High explosives - Part 10: Method for the verification of the means of initiation

This European Standard specifies a method for the verification of the initiation of a high explosive by a specified initiation system.
This method is applicable to high explosives in cartridge or bulk form, both unconfined and confined.

Explosivstoffe für zivile Zwecke - Sprengstoffe - Teil 10: Überprüfung der Zündweise

Explosifs a usage civil - Explosifs - Partie 10: Méthode de vérification du moyen d'amorçage

Eksplozivi za civilno uporabo – Razstreliva – 10. del: Metoda za overjanje načina aktiviranja

General Information

• Status: Published
• Publication Date: 31-Dec-2003
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: IEKS - Explosives
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2004
• Due Date: 01-Jan-2004
• Completion Date: 01-Jan-2004
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Directive: TP072 - Pravilnik o tehničnih in varnostnih zahtevah, obrazcih ter evidencah za eksplozive in pirotehnične izdelke
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Ref Project: EN 13631-10:2003 - Explosives for civil uses - High explosives - Part 10: Method for the verification of the means of initiation

Relations

• Revises: oSIST prEN 13631-10:2021 - Explosives for civil uses - High explosives - Part 10: Method for the verification of the means of initiation
• Effective Date: 18-Jan-2023
• Revises: oSIST prEN 13631-10:2021 - Explosives for civil uses - High explosives - Part 10: Method for the verification of the means of initiation
• Effective Date: 19-Jan-2023
• Revised: oSIST prEN 13631-10:2021 - Explosives for civil uses - High explosives - Part 10: Method for the verification of the means of initiation
• Effective Date: 01-Apr-2021

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosives for civil uses - High explosives - Part 10: Method for the verification of the means of initiationDNWLYLUDQMDExplosifs a usage civil - Explosifs - Partie 10: Méthode de vérification du moyen d'amorçageExplosivstoffe für zivile Zwecke - Sprengstoffe - Teil 10: Überprüfung der ZündweiseTa slovenski standard je istoveten z:EN 13631-10:2003SIST EN 13631-10:2004en71.100.30ICS:SLOVENSKI
STANDARDSIST EN 13631-10:200401-januar-2004







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13631-10November 2003ICS 71.100.30English versionExplosives for civil uses - High explosives - Part 10: Method forthe verification of the means of initiationExplosifs à usage civil - Explosifs - Partie 10: Méthode devérification du moyen d'amorçageExplosivstoffe für zivile Zwecke - Sprengstoffe - Teil 10:Überprüfung der ZündweiseThis European Standard was approved by CEN on 1 September 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13631-10:2003 E



EN 13631-10:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Principle.45Apparatus.56Preparation of test pieces.57Procedure.88Test report.8Annex A (informative)
Range of applicability of the test method.9Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.10Bibliography.11



EN 13631-10:2003 (E)3ForewordThis document (EN 13631-10:2003) has been prepared by Technical Committee CEN/TC 321 "Explosives for civiluses", the secretariat of which is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by May 2004, and conflicting national standards shall be withdrawn at the latest byMay 2004.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For the relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.This European Standard is one of a series of standards on Explosives for civil uses – High explosives. The otherparts of this series are:prEN 13631-1Part 1: Requirements.EN 13631-2Part 2: Determination of thermal stability of explosives.prEN 13631-3Part 3: Determination of sensitiveness to friction of explosives.EN 13631-4Part 4: Determination of sensitiveness to impact of explosives.EN 13631-5Part 5: Determination of resistance to water.EN 13631-6Part 6: Determination of resistance to hydrostatic pressure.EN 13631-7Part 7: Determination of safety and reliability at extreme temperatures.EN 13631-11Part 11: Determination of transmission of detonation.prEN 13631-12Part 12: Specification of boosters with different initiating capability.EN 13631-13Part 13: Determination of density.EN 13631-14Part 14: Determination of velocity of detonation.prEN 13631-15Part 15: Calculation of thermodynamic properties.prEN 13631-16Part 16: Detection and measurement of toxic gases.Annex A is informative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.



EN 13631-10:2003 (E)41 ScopeThis European Standard specifies a method for the verification of the initiation of a high explosive by a specifiedinitiation system.This method is applicable to high explosives in cartridge or bulk form, both unconfined and confined.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in
...