SIST EN 10242:1997/A2:2003

Threaded pipe fittings in malleable cast iron

Deletion of the Clause 12 "Quality assurance system" and creation of an informative annex with the text of Clause 12.

Gewindefittings aus Temperguss

Raccords de tuyauterie filetés en fonte malléable

Fitingi z navojem iz temprane litine

General Information

• Status: Published
• Publication Date: 31-Oct-2003
• ICS: 23.040.40 - Metal fittings
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Nov-2003
• Due Date: 01-Nov-2003
• Completion Date: 01-Nov-2003
• Directive: 89/106/EEC - Construction products
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 10242:1994/A2:2003 - Threaded pipe fittings in malleable cast iron

Relations

• Amends: SIST EN 10242:1997 - Threaded pipe fitting in malleable cast iron
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 10242:1997/A2:2003
01-november-2003
Fitingi z navojem iz temprane litine
Threaded pipe fittings in malleable cast iron
Gewindefittings aus Temperguss
Raccords de tuyauterie filetés en fonte malléable
Ta slovenski standard je istoveten z: EN 10242:1994/A2:2003
ICS:
23.040.40 Kovinski fitingi Metal fittings
SIST EN 10242:1997/A2:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 10242:1997/A2:2003

---------------------- Page: 2 ----------------------

SIST EN 10242:1997/A2:2003
EUROPEAN STANDARD
EN 10242:1994/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2003
ICS 23.040.40
English version
Threaded pipe fittings in malleable cast iron
Raccords de tuyauterie filetés en fonte malléable Gewindefittings aus Temperguss
This amendment A2 modifies the European Standard EN 10242:1994; it was approved by CEN on 28 November 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10242:1994/A2:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 10242:1997/A2:2003
EN 10242:1994/A2:2003 (E)
Foreword
This document (EN 10242:1994/A2:2003) has been prepared by Technical Committee ECISS /TC 29 "Steel tubes
and fittings for steel tubes", the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by September 2003, and conflicting national standards shall be
...