SIST EN 10242:1997

Threaded pipe fitting in malleable cast iron

This standard specifies the requirements for the design and performance of threaded pipe fittings in malleable cast iron. These fittings are for general purposes for the transmission of fluids and gases up to the limits of pressure and temperature specified in this standard. They are intended for the connection  of elements threaded in accordance with ISO 7-1, sizes 1/8 to 6. For use in conditions outside the pressure and temperature limits specified, reference shall be made to the manufacturer.

Gewindefittings aus Temperguß

Diese Norm legt Anforderungen an die Konstruktion und Anwendungsmerkmale von Temperguss-Gewindefittings fest. Diese Fittings dienen allgemein der Fortleitung  von Flüssigkeiten und Gasen bis zu den in dieser Norm festgelegten Druck- und Temperaturgrenzen. Sie sind bestimmt für die Verbindung von Teilen mit Gewinden nach ISO 7-1, Grössen 1/8 bis 6. Bei Verwendung unter Bedingungen, die ausserhalb der festgelegten Druck- und Temperaturgrenzen liegen, ist mit dem Hersteller Rücksprache zu halten.

Raccords de tuyauterie filetés en fonte malléable

La présente norme spécifie les caractériques de conception et d'utilisation des raccords de tuyauterie filetés en fonte malléable. Ces raccords, d'usage général, servent au transport de fluides et de gaz dans les limites de pression et de température spécifiées dans la présente Norme Internationale. Ils sont prévus pour le raccordement d'éléments filetés conformément a l'ISO 7-1, diametres 1/8 a 6. En cas d'utilisation en dehors de la plage spécifiée de pression ou de température, il y a lieu de se référer aux indications du fabricant.

Fitingi z navojem iz temprane litine

General Information

• Status: Published
• Publication Date: 30-Apr-1997
• ICS: 23.040.40 - Metal fittings
• Technical Committee: IFEK - Ferrous metals
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-1997
• Due Date: 01-May-1997
• Completion Date: 01-May-1997
• Directive: 89/106/EEC - Construction products
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 10242:1994 - Threaded pipe fitting in malleable cast iron

Relations

• Amended By: SIST EN 10242:1997/A1:2000 - Threaded pipe fitting in malleable cast iron
• Effective Date: 22-Dec-2008
• Amended By: SIST EN 10242:1997/A2:2003 - Threaded pipe fittings in malleable cast iron
• Effective Date: 22-Dec-2008
• Revises: oSIST prEN 10242:2022 - Threaded pipe fitting in malleable cast iron
• Effective Date: 18-Jan-2023
• Revises: oSIST prEN 10242:2022 - Threaded pipe fitting in malleable cast iron
• Effective Date: 19-Jan-2023
• Revised: oSIST prEN 10242:2022 - Threaded pipe fitting in malleable cast iron
• Effective Date: 08-Sep-2021

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fitingi z navojem iz temprane litineGewindefittings aus TempergußRaccords de tuyauterie filetés en fonte malléableThreaded pipe fitting in malleable cast iron23.040.40Kovinski fitingiMetal fittingsICS:Ta slovenski standard je istoveten z:EN 10242:1994SIST EN 10242:1997en01-maj-1997SIST EN 10242:1997SLOVENSKI
STANDARD



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIST EN 10242:1997



SIS
...