iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 62477-1:2012/A1:2017

(Amendment)

Safety requirements for power electronic converter systems and equipment - Part 1: General (IEC 62477-1:2012/A1:2016)

Safety requirements for power electronic converter systems and equipment - Part 1: General (IEC 62477-1:2012/A1:2016)

2017-05-02: D156/C084 - Ratified standards not being made available.

Sicherheitsanforderungen an Leistungshalbleiter-Umrichtersysteme und -betriebsmittel - Teil 1: Allgemeines

Exigences de sécurité applicables aux systèmes et matériels électroniques de conversion de puissance - Partie 1: Généralités

Varnostne zahteve za močnostno elektroniko pretvorniških sistemov in opreme - 1. del: Splošno (IEC 62477-1:2012/A1:2016) - Dopolnilo A1

General Information

Status
Published
Publication Date
08-Mar-2017
ICS
29.200 - Rectifiers. Convertors. Stabilized power supply
Technical Committee
I11 - Imaginarni 11
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
15-Feb-2017
Due Date
22-Apr-2017
Completion Date
09-Mar-2017
Directive
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
Ref Project
EN 62477-1:2012/A1:2017 - Safety requirements for power electronic converter systems and equipment - Part 1: General

Relations

Revised
SIST EN IEC 62477-1:2024 - Safety requirements for power electronic converter systems and equipment - Part 1: General (IEC 62477-1:2022)
Effective Date
26-Jul-2021

Buy Standard

EN 62477-1:2012/A1:2017EN 62477-1:2012/A1:2017
PreviousNext
Amendment
EN 62477-1:2012/A1:2017
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62477-1:2012/A1:2017
01-april-2017
9DUQRVWQH]DKWHYH]DPRþQRVWQRHOHNWURQLNRSUHWYRUQLãNLKVLVWHPRYLQRSUHPH
GHO6SORãQR ,(&$ 'RSROQLOR$
Safety requirements for power electronic converter systems and equipment - Part 1:
General (IEC 62477-1:2012/A1:2016)
Ta slovenski standard je istoveten z: EN 62477-1:2012/A1:2017
ICS:
29.200 8VPHUQLNL3UHWYRUQLNL Rectifiers. Convertors.
6WDELOL]LUDQRHOHNWULþQR Stabilized power supply
QDSDMDQMH
SIST EN 62477-1:2012/A1:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62477-1:2012/A1:2017

---------------------- Page: 2 ----------------------

SIST EN 62477-1:2012/A1:2017


EUROPEAN STANDARD EN 62477-1:2012/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2017
ICS 29.200

English Version
Safety requirements for power electronic converter systems and
equipment - Part 1: General
(IEC 62477-1:2012/A1:2016)
Exigences de sécurité applicables aux systèmes et Sicherheitsanforderungen an Leistungshalbleiter-
matériels électroniques de conversion de puissance - Partie Umrichtersysteme und -betriebsmittel - Teil 1: Allgemeines
1: Généralités (IEC 62477-1:2012/A1:2016)
(IEC 62477-1:2012/A1:2016)
This amendment A1 modifies the European Standard EN 62477-1:2012; it was approved by CENELEC on 2016-09-01. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62477-1:2012/A1:2017 E

---------------------- Page: 3 ----------------------

SIST EN 62477-1:2012/A1:2017
EN 62477-1:2012/A1:2017
European foreword
The text of document 22/270A/FDIS, future IEC 62477-1:2012/A1, prepared by IEC/TC 22 “Power
electronic systems and equipment” was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62477-1:2012/A1:2017.

The following dates are fixed:
(dop) 2017-08-10
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2020-02-10
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62477-1:2012/A1:2016 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
Addition:

IEC 60865 (series) NOTE Harmonized as EN 60865 (series).
IEC 60865-1 NOTE Harmonized as EN 60865-1.
IEC 60909 (series) NOTE Harmonized as EN 60909 (series).
IEC 60909-0:2016 NOTE Harmonized as EN 60909-0:2016.
IEC 60947-1:2007 NOTE Harmonized as EN 60947-1:2007.
IEC 60947-6-1:2005 NOTE Harmonized as EN 60947-6-1:2005.
IEC 60947-6-1:2005/AMD1:2013 NOTE Harmonized as EN 60947-6-1:2005/A1:2014.
IEC 61439-1:2011 NOTE Harmonized as EN 61439-1:2011.

2

---------------------- Page: 4 ----------------------

SIST EN 62477-1:2012/A1:2017



IEC 62477-1

®


Edition 1.0 2016-07




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE




G ROUP SAFETY PUBLICATION

PU BLICATION GROUPÉE DE SÉCURITÉ




AMENDMENT 1

AMENDEMENT 1



Safety requirements for power electronic converter systems an
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62040-1:2019(Main)
Uninterruptible power systems (UPS) - Part 1: Safety requirements (IEC 62040-1:2017)
EN IEC 62040-1:2019

This standard applies to movable, stationary, fixed or built-in UPS for use in lowvoltage distribution systems and that are intended to be installed in an area accessible by an ordinary person or in a restricted access area as applicable, that deliver fixed frequency AC output voltage with port voltages not exceeding 1000 V AC or 1500 V DC and that include an energy storage device. It applies to pluggable and to permanently connected UPS, whether consisting of a system of interconnected units or of independent units, subject to installing, operating and maintaining the UPS in the manner prescribed by the manufacturer. Alternative devices exist, and as such, where "battery" appears in the text of this document, this is to be understood as "energy storage device". This document specifies requirements to ensure safety for the ordinary person who comes into contact with the UPS and, where specifically stated, for the skilled person. The objective is to reduce risks of fire, electric shock, thermal, energy and mechanical hazards during use and operation and, where specifically stated, during service and maintenance. This product standard is harmonized with the applicable parts of group safety publication IEC 62477-1:2012 for power electronic converter systems and contains additional requirements relevant to UPS. This document does not cover: - UPS that have a DC output; - systems for operation on moving platforms including, but not limited to, aircrafts, ships and motor vehicles; - external AC or DC input and output distribution boards covered by their specific product standard; - stand-alone static transfer systems (STS) covered by IEC 62310-1; - systems wherein the output voltage is directly derived from a rotating machine; - telecommunications apparatus other than UPS for such apparatus; - functional safety aspects covered by IEC 61508 (all parts).

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61800-5-1:2008/A1:2017(Amendment)
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy (IEC 61800-5-1:2007/A1:2016)
EN 61800-5-1:2007/A1:2017

2017-05-02: D156/C084 - Ratified standards not being made available.
Published following BT156/DG10475/DV

  • Amendment
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61800-5-2:2017(Main)
Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional (IEC 61800-5-2:2016)
EN 61800-5-2:2017

This part of IEC 61800, which is a product standard, specifies requirements and makes
recommendations for the design and development, integration and validation of safety related
power drive systems (PDS(SR)) in terms of their functional safety considerations. It applies to
adjustable speed electrical power drive systems covered by the other parts of the IEC 61800
series of standards as referred in IEC 61800-2.
NOTE 1 The term “integration” refers to the PDS(SR) itself, not to its incorporation into the safety-related
application.
NOTE 2 Other parts of IEC 61800 cover rating specifications, EMC, electrical safety, etc.
This International Standard is applicable where functional safety of a PDS(SR) is claimed and
the PDS(SR) is operating mainly in the high demand or continuous mode (see 3.15)
While low demand mode operation is possible for a PDS(SR), this standard concentrates on
high demand and continuous mode. Safety sub-functions implemented for high demand or
continuous mode can also be used in low demand mode. Requirements for low demand mode
are given in IEC 61508 series. Some guidance for the estimation of average probability of
dangerous failure on demand (PFDavg) value is provided in Annex F.
This part of IEC 61800 sets out safety-related considerations of PDS(SR)s in terms of the
framework of IEC 61508, and introduces requirements for PDS(SR)s as subsystems of a
safety-related system. It is intended to facilitate the realisation of the electrical/ electronic/
programmable electronic (E/E/PE) parts of a PDS(SR) in relation to the safety performance of
safety sub-function(s) of a PDS.
Manufacturers and suppliers of PDS(SR)s by using the normative requirements of this part of
IEC 61800 will indicate to users (system integrator, original equipment manufacturer) the
safety performance for their equipment. This will facilitate the incorporation of a PDS(SR) into
a safety-related control system using the principles of IEC 61508, and possibly its specific
sector implementations (for example IEC 61511, IEC 61513, IEC 62061 or ISO 13849).
By applying the requirements from this part of the IEC 61800 series, the corresponding
requirements of IEC 61508 that are necessary for a PDS(SR) are fulfilled.
This part of IEC 61800 does not specify requirements for:
• the hazard and risk analysis of a particular application;
• the identification of safety sub-functions for that application;
• the initial allocation of SILs to those safety sub-functions;
• the driven equipment except for interface arrangements;
• secondary hazards (for example from failure in a production or manufacturing process);
• the electrical, thermal and energy safety considerations, which are covered in
+IEC 61800-5-1;
• the PDS(SR) manufacturing process;
• the validity of signals and commands to the PDS(SR).
• security aspects (e.g. cyber security or PDS(SR) security of access)
NOTE 3 The functional safety requirements of a PDS(SR) are dependent on the application, and can be
considered as a part of the overall risk assessment of the installation. Where the supplier of the PDS(SR) is not
responsible for the driven equipment, the installation designer is responsible for the risk assessment, and for
specifying the functional and safety integrity requirements of the PDS(SR).
This part of IEC 61800 only applies to PDS(SR)s implementing safety sub-functions with a SIL
not greater than SIL 3.
Figure 1 shows the installation and the functional parts of a PDS(SR) that are considered in
this part of IEC 61800 and shows a logical representation of a PDS(SR) rather than its
physical description.

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62040-5-3:2017(Main)
Uninterruptible power systems (UPS) - Part 5-3: d.c. output UPS - Performance and test requirements (IEC 62040-5-3:2016)
EN 62040-5-3:2017

This part of IEC 62040 establishes the performance and test requirements applied to
movable, stationary and fixed electronic DC uninterruptible power systems (DC UPS) that
– are supplied from an AC voltage source not exceeding 1 000 V,
– deliver a DC output voltage not exceeding 1 500 V,
– incorporate an energy storage device, and
– have a primary function to ensure continuity of DC power to loads.
This document specifies performance and test requirements of a complete DC UPS and not of
individual DC UPS functional units. The individual DC UPS functional units are dealt with
in IEC publications referred to in the bibliography that apply so far that they are not in
contradiction with this document.
DC UPSs have been developed over a wide range of power, from less than a hundred watts
to megawatts, to meet requirements for availability and quality of power to a variety of loads.
Refer to Annexes A and B for information on typical DC UPS configurations and topologies.
This document also includes DC UPS performance and test requirements related to
interrupters, isolating switches, and tie switches, if any, which are integral to the DC UPS.
These components interact with other functional units of the DC UPS to maintain continuity
of load power.
This document does not cover
– conventional AC input distribution boards and their associated switches,
– conventional DC distribution boards and their associated switches,
– conventional AC UPSs covered by IEC 62040-3,
– low-voltage DC power supply devices covered by a specific product standard, for example
IEC 61204, and those covered by a specific product standard, for example ITU
communication standards, and
– systems wherein the output voltage is derived from a rotating machine.
NOTE 1 This document recognises that power availability to information technology (IT) equipment represents a
major UPS application. The DC UPS output characteristics specified in this document are therefore also aimed at
ensuring compatibility with the requirements of IT equipment. This, subject to any limitation stated in the
manufacturer’s declaration, includes requirements for steady state and transient voltage variation as well as for
the supply of both resistive and constant power load characteristics of IT equipment.
NOTE 2 Test loads specified in this document simulate both resistive and constant power load characteristics.
Their use is prescribed with the objective of verifying design and performance, as declared by the manufacturer,
and also of minimising any complexity and energy consumption during the tests.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61800-7-201:2016(Main)
Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification
EN 61800-7-201:2016

This part of IEC 61800 specifies profile type 1 for power drive systems (PDS). Profile type 1
can be mapped onto different communication network technologies.
The functions specified in this part of IEC 61800 are not intended to ensure functional safety.
This requires additional measures according to the relevant standards, agreements and laws.

  • Standard
    196 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61800-7-302:2016(Main)
Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies
EN 61800-7-302:2016

This part of IEC 61800 specifies the mapping of the profile type 2 (CIP MotionTM) specified in
IEC 61800-7-202 onto different network technologies.
– DeviceNet™ (CP 2/3), see Clause 5,
– ControlNet™ (CP 2/1), see Clause 6,
– EtherNet/IP™ (CP 2/2), see Clause 7.
The functions specified in this part of IEC 61800-7 are not intended to ensure functional
safety. This requires additional measures according to the relevant standards, agreements
and laws.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61800-7-301:2016(Main)
Adjustable speed electrical power drive systems -- Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies
EN 61800-7-301:2016

This part of IEC 61800 specifies the mapping of the profile type 1 (CiA 402) specified in
IEC 61800-7-201 onto different network technologies.
The functions specified in this part of IEC 61800-7 are not intended to ensure functional
safety. This requires additional measures according to the relevant standards, agreements
and laws.
– CANopen, see Clause 5;
– CC-Link IE Field, see Clause 6;
– EPA, see Clause 7;
– EtherCAT, see Clause 8;
– ETHERNET Powerlink, see Clause 9;

  • Standard
    160 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61800-7-303:2016(Main)
Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies
EN 61800-7-303:2016

This part of IEC 61800 specifies the mapping of the profile type 3 (PROFIdrive) specified in
IEC 61800-7-203 onto different network technologies.
– PROFIBUS DP, see Clause 4,
– PROFINET IO, see Clause 5.
The functions specified in this part of IEC 61800-7 are not intended to ensure functional
safety. This requires additional measures according to the relevant standards, agreements
and laws.

  • Standard
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61800-7-1:2016(Main)
Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition
EN 61800-7-1:2016

This part of IEC 61800 specifies a generic interface between power drive system(s) (PDS)
and the application control program in a controller. The generic PDS interface is not specific
to any particular communication network technology. Annexes of this part of IEC 61800
specify the mapping of the different drive profiles types onto the generic PDS interface.
The functions specified in this part of IEC 61800 are not intended to ensure functional safety.
This requires additional measures according to the relevant standards, agreements and laws.

  • Standard
    112 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61800-7-202:2016(Main)
Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification
EN 61800-7-202:2016

This part of IEC 61800 specifies profile type 2 (CIP Motion™) for Power Drive Systems (PDS).
Profile type 2 can be mapped onto different communication network technologies.
The functions specified in this part of IEC 61800-7 are not intended to ensure functional
safety. This requires additional measures according to the relevant standards, agreements
and laws.

  • Standard
    292 pages
    English language
    sale 10% off
    e-Library read for
    1 day