iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61316:2000

(Main)

Industrial cable reels

Industrial cable reels

Applies to cable reels with a rated operating voltage not exceeding 690 V a.c./d.c. and 500 Hz with a rated current not exceeding 63A, primarily intended to industrial use, either indoors or outdoors, for use with accessories complying with EN 60309-1.

Leitungsroller für industrielle Anwendung

Enrouleurs de câbles industriels

S'applique aux enrouleurs de câble ayant une tension assignée ne dépassant pas 690 V en courant continu ou en courant alternatif et 500 Hz avec un courant ne dépassant pas 63 A, essentiellement destinés aux usages industriels, à l'intérieur ou à l'extérieur des bâtiments, devant être utilisés avec des appareils conformes à la EN 60309-1.

Industrial cable reels

General Information

Status
Withdrawn
Publication Date
31-May-2000
Withdrawal Date
30-May-2024
ICS
29.120.99 - Other electrical accessories
Technical Committee
EPR - Electrical accessories
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
30-May-2024
Due Date
22-Jun-2024
Completion Date
31-May-2024
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
EN 61316:1999 - Industrial cable reels

Relations

Replaced By
SIST EN IEC 61316:2021 - Industrial cable reels (IEC 61316:2021)
Effective Date
07-Sep-2021

Buy Standard

EN 61316:2000EN 61316:2000
PreviousNext
Standard
EN 61316:2000
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61316:2000
01-junij-2000
Industrial cable reels
Industrial cable reels
Leitungsroller für industrielle Anwendung
Enrouleurs de câbles industriels
Ta slovenski standard je istoveten z: EN 61316:1999
ICS:
29.120.99 'UXJDHOHNWULþQDGRGDWQD Other electrical accessories
RSUHPD
SIST EN 61316:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

NORME CEI
INTERNATIONALE IEC
61316
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
1999-09
Enrouleurs de câble industriels
Industrial cable reels
 IEC 1999 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photo-copie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
U
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 2 ----------------------

61316 © IEC:1999 – 3 –
CONTENTS
Page
FOREWORD . 5
Clause
 1 Scope . 9
 2 Normative references. 9
 3 Definitions. 11
 4 General. 15
 5 Standard ratings . 17
 6 Classification . 17
 7 Marking. 19
 8 Dimensions . 21
 9 Protection against electric shock. 21
10 Provision for earthing. 23
11 Terminals. 27
12 Interlocks . 27
13 Resistance to ageing of rubber and thermoplastic material. 29
14 General construction. 29
15 Construction of socket-outlets. 33
16 Construction of plugs and connectors . 33
17 Construction of appliance inlets . 33
18 Degrees of protection. 33
19 Insulation resistance and dielectric strength. 35
20 Breaking capacity. 37
21 Normal operation . 37
22 Temperature rise . 41
23 Flexible cables and their connection . 45
24 Mechanical strength. 51
25 Screws, current-carrying parts and connections . 53
26 Creepage distances, clearances and dis
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 60670-23:2009/A11:2023(Amendment)
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures
EN 60670-23:2008/A11:2023

To cover requirements for boxes and enclosures with provision for suspension means

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60670-23:2009/A1:2023(Amendment)
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures
EN 60670-23:2008/A1:2023

To cover requirements for boxes and enclosures with provision for suspension means

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60670-24:2013/A11:2023(Amendment)
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment
EN 60670-24:2013/A11:2023

To cover requirements for boxes and enclosures with provision for suspension means

  • Amendment
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61316:2021(Main)
Industrial cable reels (IEC 61316:2021)
EN IEC 61316:2021

This document applies to cable reels provided with a non-detachable flexible cable with a
rated operating voltage not exceeding 690 V DC and/or 690 V AC with a frequency not
exceeding 500 Hz and a rated current not exceeding 63 A, primarily intended for industrial
use, either indoors or outdoors, for use with accessories complying with IEC 60309-1,
IEC 60309-2 or IEC 60309-4.
This document applies to:
– portable cable reels equipped with one plug or appliance-inlet complying with IEC 60309-1
or IEC 60309-2 and at least one socket-outlet complying with IEC 60309-1, IEC 60309-2
or IEC 60309-4;
– fixed cable reels equipped with at least one socket-outlet complying with IEC 60309-1,
IEC 60309-2 or IEC 60309-4;
– cable reels suitable for use at ambient temperature normally within the range of −25 °C
to +40 °C.
The use of this equipment on construction sites and for agricultural, commercial and domestic
appliances is not precluded.
This document also applies to cable reels intended to be used in extra-low voltage
installations.
In locations where special conditions prevail, for example, on board ships, in vehicles and the
like, or where explosions are liable to occur, additional requirements can be necessary.
NOTE 1 This document was not developed for Electric Vehicle (EV) application, but it can be used as guide for
cable reels for EV application
NOTE 2 Additional requirements for cable reels for currents higher than 63 A are under consideration.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60670-1:2021(Main)
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements
EN IEC 60670-1:2021

This part of IEC 60670 applies to boxes, enclosures and parts of enclosures (hereafter called
“boxes” and “enclosures”) for electrical accessories with a rated voltage not exceeding
1 000 V a.c. and 1 500 V d.c. intended for household or similar fixed electrical installations,
either indoors or outdoors.
Boxes and enclosures complying with this standard are suitable for use at ambient
temperatures not normally exceeding +40 °C, but their average over a period of 24 h does not
exceed +35 °C, with a lower limit of the ambient air temperature of −5 °C.
During the installation the temperature may be outside the above temperature range
according to the classification of the boxes and the enclosures.
This International Standard is intended to apply to boxes and enclosures for electrical
accessories within the scope of IEC technical committee 23.
This standard may be used as a reference document for other IEC technical committees and
subcommittees.
A box or an enclosure which is an integral part of an electrical accessory and provides
protection for that accessory against external influences (for example mechanical impact,
ingress of solid objects or water, etc.) is covered by the relevant standard for such an
accessory.
This standard does not apply to
– ceiling roses;
– luminaire supporting couplers;
– boxes, enclosures and parts of enclosures specifically designed to be used for cable
trunking and ducting systems complying with IEC 61084 and which are not intended to be
installed outside of these systems.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60670-1:2021/A11:2021(Amendment)
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements
EN IEC 60670-1:2021/A11:2021

To be launched for vote and published with prEN IEC=66754.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62962:2020(Main)
Particular requirements for load-shedding equipment (LSE) (IEC 62962:2019)
EN IEC 62962:2019

The purpose of this document is to provide requirements for equipment to be used in energy
efficiency systems. This document covers load-shedding equipment (LSE).
Guidelines relating to safety for LSE as given in IEC Guide 110 have been followed.
This document applies to load-shedding equipment for household and similar uses. The loadshedding
function is used in energy management systems to optimize the overall use of
electrical energy including production and storage. Load-shedding can be used for example
for energy efficiency purposes as per IEC 60364-8-1:2019.
This document applies to LSE for operation under normal conditions:
– AC circuits with a rated frequency of 50 Hz, 60 Hz or both, with a rated voltage not
exceeding 440 V (between phases), a rated current not exceeding 125 A and a rated
short-circuit capacity not exceeding 25 000 A; or
– DC circuits1.
LSEs are intended to control the energy supplied to one or more load, circuit or mesh when:
– defined conditions of time and current are reached;
– a command or information from an external system is received.
An LSE is intended to serve as:
– a single equipment having all the necessary means able to control the loads (e.g. the
electrical energy management function is embedded in such an equipment); or
– a unit integrated into a more complex equipment or an independent equipment being part
of an electrical energy management system (EEMS); or
– an assembly of independent equipment forming an LSE (e.g. an LSE with external current
sensors); or
– as a combination of the above points.
LSE can have a wireless interface.
LSE is part of the fixed installation.
NOTE 1 This document covers load shedding equipment in the fixed installations including portable appliances
connected thereto.
LSE are intended for use in circuits with protection against electrical shock and over-current
according to IEC 60364 (all parts).
NOTE 2 For example, fault protection (indirect contact protection) can be covered as follows:
– in TT systems, by an upstream RCBOs or RCCBs according to IEC 61008-1 and IEC 61009-1;
– in a TN system, by an upstream over-current protective device.
LSEs do not, by their nature, provide an isolation function nor the over-current protection.
LSEs are normally installed by instructed persons (IEC 60050-195:1998, 195-04-02) or skilled
persons (IEC 60050-195:1998, 195-04-01) and normally used by ordinary persons
(IEC 60005-195:1998, 195-04-03).
This document contains all requirements necessary to ensure compliance with the operational
characteristics required by type tests for LSEs based on single equipment or based on an
assembly of independent equipment.
These requirements apply for standard conditions of temperature and environment as given
in 5.1. They are applicable to LSEs with a degree of protection of IP 20 intended for use in an
environment with pollution degree 2. For LSE having a degree of protection higher than IP 20
according to IEC 60529, for use in locations where arduous environmental conditions prevail
(e.g. excessive humidity, heat or cold or deposition of dust) and in hazardous locations (e.g.
where explosions are liable of occur), special construction can be required.
If other functions are included in LSE, these functions are covered by the relevant standards.
This document does not address communication aspects such as protocols, interoperability,
data security and any other related aspects.

  • Standard
    136 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61242:1997/A13:2017(Amendment)
Electrical accessories - Cable reels for household and similar purposes
EN 61242:1997/A13:2017

D156/C038 - BT approved the British NC request for modification of an SNC in EN 61242:1997 and invited CCMC to issue the corresponding amendment.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61242:1997/A2:2016(Amendment)
Electrical accessories - Cable reels for household and similar purposes (IEC 61242:1995/A2:2015)
EN 61242:1997/A2:2016

2016-01-12: no BT decision available about extension of DOW = DOR + 60 months
2015-04-17: Extension of DOW = DOR + 60 Months to be requested to CLC/BT.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62080:2010/A2:2015(Amendment)
Sound signalling devices for household and similar purposes (IEC 62080:2001/A2:2015)
EN 62080:2009/A2:2015
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day