SIST EN 60384-26-1:2010

Fixed capacitors for use in electronic equipment - Part 26-1: Blank detail specification - Fixed aluminum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ (IEC 60384-26-1:2010)

IEC 60384-26-1:2010 is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specification nor shall they so be described.

Festkondensatoren zu Verwendung in Geräten der Elektronik - Teil 26-1: Vordruck für Bauartspezifikation - Aluminium-Elektrolyt-Kondensatoren mit leitfähigem Polymerfestkörper- Elektrolyten - Qualitätsbewertungsstufe EZ (IEC 60384-26-1:2010)

Condensateurs fixes utilisés dans les équipements électroniques - Partie 26-1: Spécification particulière cadre - Condensateurs fixes électrolytiques en aluminium à electrolyte solide en polymère conducteur - Niveau d'assurance de la qualité EZ (CEI 60384-26-1:2010)

La CEI 60384-26-1:2010 est un document annexe à la spécification intermédiaire qui contient des exigences pour le modèle, la disposition et le contenu minimum des spécifications particulières. Les spécifications particulières qui ne satisfont pas aux exigences peuvent ne pas être considérées comme conformes aux spécifications de la CEI et ne doivent pas être décrites comme telles.

Fiksni kondenzatorji za elektronsko opremo - 26-1. del: Okvirna podrobna specifikacija - Fiksni aluminijski elektrolitski kondenzatorji s trdnim elektrolitom iz prevodnega polimera - Raven ocenjevanja EZ (IEC 60384-26-1:2010)

IEC 60384-26-1:2010 je dopolnilni dokument k področni specifikaciji in vsebuje zahteve za stil in postavitev ter minimalno vsebino podrobnih specifikacij. Podrobne specifikacije, ki niso v skladu s temi zahtevami, niso v skladu z IEC specifikacijo niti ne morejo biti tako opisane.

General Information

• Status: Published
• Publication Date: 07-Nov-2010
• ICS: 31.060.50 - Aluminium electrolytic capacitors
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 12-Oct-2010
• Due Date: 17-Dec-2010
• Completion Date: 08-Nov-2010
• Ref Project: EN 60384-26-1:2010 - Fixed capacitors for use in electronic equipment - Part 26-1: Blank detail specification - Fixed aluminum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2010
Fiksni kondenzatorji za elektronsko opremo - 26-1. del: Okvirna podrobna
specifikacija - Fiksni aluminijski elektrolitski kondenzatorji s trdnim elektrolitom iz
prevodnega polimera - Raven ocenjevanja EZ (IEC 60384-26-1:2010)
Fixed capacitors for use in electronic equipment - Part 26-1: Blank detail specification -
Fixed aluminum electrolytic capacitors with conductive polymer solid electrolyte -
Assessment level EZ (IEC 60384-26-1:2010)
Festkondensatoren zu Verwendung in Geräten der Elektronik - Teil 26-1: Vordruck für
Bauartspezifikation - Aluminium-Elektrolyt-Kondensatoren mit leitfähigem
Polymerfestkörper- Elektrolyten - Qualitätsbewertungsstufe EZ (IEC 60384-26-1:2010)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 26-1:
Spécification particulière cadre - Condensateurs fixes électrolytiques en aluminium à
electrolyte solide en polymère conducteur - Niveau d'assurance de la qualité EZ (CEI
60384-26-1:2010)
Ta slovenski standard je istoveten z: EN 60384-26-1:2010
ICS:
31.060.50 Aluminijski elektrolitni Aluminium electrolytic
kondenzatorji capacitors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60384-26-1
NORME EUROPÉENNE
October 2010
EUROPÄISCHE NORM
ICS 31.060.50
English version
Fixed capacitors for use in electronic equipment -
Part 26-1: Blank detail specification -
Fixed aluminum electrolytic capacitors with conductive polymer solid
electrolyte -
Assessment level EZ
(IEC 60384-26-1:2010)
Condensateurs fixes utilisés  Festkondensatoren zu Verwendung
dans les équipements électroniques - in Geräten der Elektronik -
Partie 26-1: Spécification particulière Teil 26-1: Vordruck
cadre - für Bauartspezifikation -
Condensateurs fixes électrolytiques Aluminium-Elektrolyt-Kondensatoren
en aluminium à electrolyte solide mit leitfähigem Polymerfestkörper-
en polymère conducteur - Elektrolyten -
Niveau d'assurance de la qualité EZ Qualitätsbewertungsstufe EZ
(CEI 60384-26-1:2010) (IEC 60384-26-1:2010)

This European Standard was approved by CENELEC on 2010-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60384-26-1:2010 E
Foreword
The text of document 40/2053/FDIS, future edition 1 of IEC 60384-26-1, prepared by IEC TC 40,
Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 60384-26-1 on 2010-10-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-07-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-10-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60384-26-1:2010 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60384-26-1:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60068-2-20 2008 Environmental testing - EN 60068-2-20 2008
Part 2-20: Tests - Test T: Test methods for
solderability and resistance to soldering heat
of devices with leads
IEC 60384-1 2008 Fixed capacitors for use in electronic EN 60384-1 2009
equipment -
Part 1: Generic specification
IEC 60384-26 2010 Fixed capacitors for use in electronic EN 60384-26 2010
equipment -
Part 26: Sectional specification - Fixed
aluminium electrolytic capacitors with
conductive polymer solid electrolyte

IEC 60384-26-1 ®
Edition1.0 2010-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fixed capacitors for use in electronic equipment –
Part 26-1: Blank detail specification – Fixed aluminium electrolytic capacitors
with conductive polymer solid electrolyte – Assessment level EZ

Condensateurs fixes utilisés dans les équipements électroniques –
Partie 26-1: Spécification particulière cadre – Condensateurs fixes
électrolytiques en aluminium à électrolyte solide en polymère conducteur –
Niveau d'assurance de la qualité EZ

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
Q
CODE PRIX
ICS 31.060.50 ISBN 978-2-88912-169-4
– 2 – 60384-26-1 © IEC:2010
CONTENTS
FOREWORD.3
1 General data .6
1.1 Recommended method(s) of mounting (to be inserted).6
1.2 Dimensions .6
1.3 Rating and characteristics .7
1.4 Normative references .7
1.5 Marking .8
1.6 Ordering information.8
1.7 Certified records of released lots.8
1.8 Additional information (not for inspection).8
1.9 Other requirements for generic or sectional specifications .8
2 Inspection requirements .8
2.1 Procedures.8
2.1.1 Qualification approval.8
2.1.2 Quality conformance inspection .8
Bibliography.17

Table 1 – Case size reference and dimensions .6
Table 2 – Values of capacitance and of voltage related to case sizes .7
Table 3 – Characteristics .7
Table 4 – Other requests (other characteristics) .8
Table 5 – Test schedule for quality conformance inspection.9

60384-26-1 © IEC:2010 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 26-1: Blank detail specification –
Fixed aluminium electrolytic capacitors
with conductive polymer solid electrolyte –
Assessment level EZ
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60384-26-1 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment
The text of this standard is based on the following documents:
FDIS Report on voting
40/2053/FDIS 40/2063/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

– 4 – 60384-26-1 © IEC:2010
A list of all parts of the IEC 60384 series can be found, under the general title Fixed
capacitors for use in the electronic equipment, on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
60384-26-1 © IEC:2010 – 5 –
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT –

Part 26-1: Blank detail specification –
Fixed aluminium electrolytic capacitors
with conductive polymer solid electrolyte –
Assessment level EZ
Blank detail specification
A blank detail specification is a supplementary document to the sectional specification and
contains requirements for style and layout and
...