SIST EN 301 908-11 V2.3.1:2005
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 11: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 11: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive
The first release of EN 301 908 does not cover requirements on repeaters for IMT-2000. In release 4 and higher of the 3GPP specifications, repeater requirements are included. this work item will cover the creation of a new part 11 of the EN 301 908.
Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Bazne postaje (BS), ponavljalniki (repetitorji) in uporabniška oprema (UE) za celična omrežja tretje generacije IMT-2000 - 11. del: Harmonizirani EN za IMT-2000, CDMA z neposredno modulacijo po razpršenem spektru in frekvenčnim dupleksom(UTRA FDD)(za ponavljalnike / repetitorje), ki zajema bistvene zahteve člena 3.2 direktive R&TTE
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 11: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 301 908-11 Version 2.3.1SIST EN 301 908-11 V2.3.1:2005en01-februar-2005SIST EN 301 908-11 V2.3.1:2005SLOVENSKI
STANDARD
SIST EN 301 908-11 V2.3.1:2005
ETSI EN 301 908-11 V2.3.1 (2004-10)Candidate Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Base Stations (BS), Repeaters and User Equipment (UE) forIMT-2000 Third-Generation cellular networks;Part 11: Harmonized EN for IMT-2000,CDMA Direct Spread (UTRA FDD) (Repeaters)covering essential requirementsof article 3.2 of the R&TTE Directive
SIST EN 301 908-11 V2.3.1:2005
ETSI ETSI EN 301 908-11 V2.3.1 (2004-10) 2
Reference DEN/ERM-TFES-002-11 Keywords IMT-2000, UMTS, 3G, digital, regulation, repeater, testing, WCDMA, 3GPP ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2004. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 301 908-11 V2.3.1:2005
ETSI ETSI EN 301 908-11 V2.3.1 (2004-10) 3
Contents Intellectual Property Rights.5 Foreword.5 Introduction.7 1 Scope.9 2 References.9 3 Definitions and abbreviations.10 3.1 Definitions.10 3.2 Abbreviations.10 4 Technical requirements specifications.11 4.1 Environmental profile.11 4.2 Conformance requirements.11 4.2.1 Introduction.11 4.2.2 Spectrum emissions mask.11 4.2.2.1 Definition.11 4.2.2.2 Limit.11 4.2.2.3 Conformance.13 4.2.3 Spurious emissions.13 4.2.3.1 Definition.13 4.2.3.2 Limit.13 4.2.3.2.1 Spurious emissions.13 4.2.3.2.2 Co-existence with GSM 900.15 4.2.3.2.3 Co-existence with DCS 1800.16 4.2.3.2.4 Co-existence with services in adjacent frequency bands.16 4.2.3.2.5 Co-existence with UTRA-TDD.16 4.2.3.2.6 Co-existence with UTRA-FDD BS.16 4.2.3.3 Conformance.17 4.2.4 Maximum output power.17 4.2.4.1 Definition.17 4.2.4.2 Limit.17 4.2.4.3 Conformance.17 4.2.5 Input intermodulation.17 4.2.5.1 Definition.17 4.2.5.2 Limit.18 4.2.5.2.1 General input intermodulation requirement.18 4.2.5.2.2 Co-existence with GSM 900 and/or DCS 1800.18 4.2.5.3 Conformance.18 4.2.6 Out of band gain.19 4.2.6.1 Definition.19 4.2.6.2 Limits.19 4.2.6.3 Conformance.19 4.2.7 Adjacent Channel Rejection Ratio.19 4.2.7.1 Definition.19 4.2.7.2 Limit.20 4.2.7.3 Conformance.20 4.2.8 Output intermodulation.20 4.2.8.1 Definition.20 4.2.8.2 Limit.20 4.2.8.3 Conformance.20 5 Testing for compliance with technical requirements.20 5.1 Conditions for testing.20 5.2 Interpretation of the measurement results.21 5.3 Essential radio test suites.22 5.3.1 Spectrum emission mask.22 SIST EN 301 908-11 V2.3.1:2005
ETSI ETSI EN 301 908-11 V2.3.1 (2004-10) 4
5.3.1.1 Initial conditions.22 5.3.1.2 Procedures.23 5.3.2 Spurious emissions.23 5.3.2.1 Initial conditions.23 5.3.2.2 Procedure.23 5.3.3 Maximum output power.24 5.3.3.1 Initial conditions.24 5.3.3.2 Procedure.24 5.3.4 Input intermodulation.24 5.3.4.1 Initial conditions.24 5.3.4.2 Procedures.24 5.3.5 Out of band gain.25 5.3.5.1 Initial conditions.25 5.3.5.2 Procedure.25 5.3.6 Adjacent Channel Rejection Ratio.25 5.3.6.1 Initial conditions.25 5.3.6.2 Procedures.25 5.3.7 Output intermodulation.26 5.3.7.1 Initial conditions.26 5.3.7.2 Procedures.26 Annex A (normative): EN Requirements Table (EN-RT).27 Annex B (normative): Repeater configurations.28 B.1 Power supply.28 B.2 Power supply options.28 B.3 Combining of Repeaters.28 Annex C (informative): Environmental profile specification.29 Annex D (informative): Bibliography.30 Annex E (informative): The EN title in the official languages.31 History.33
SIST EN 301 908-11 V2.3.1:2005
ETSI ETSI EN 301 908-11 V2.3.1 (2004-10) 5
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [8] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive"). The present document is part 11 of a multi-part deliverable covering the Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks, as identified below: Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive"; Part 2: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 3: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 4: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 5: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS and Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 6: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 7: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 10: "Harmonized EN for IMT-2000 FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 11: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive". SIST EN 301 908-11 V2.3.1:2005
ETSI ETSI EN 301 908-11 V2.3.1 (2004-10) 6
Technical specifications relevant to Directive 1999/5/EC [1] are given in annex A in the present document and annex A of part 1.
National transposition dates Date of adoption of this EN: 24 September 2004 Date of latest announcement of this EN (doa): 31 December 2004 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 June 2005 Date of withdrawal of any conflicting National Standard (dow): 31 December 2007
SIST EN 301 908-11 V2.3.1:2005
ETSI ETSI EN 301 908-11 V2.3.1 (2004-10) 7
Introduction The present document is part of a set of standards designed to fit in a modular structure to cover all radio and telecommunications terminal equipment under the R&TTE Directive [1]. Each standard is a module in the structure. The modular structure is shown in figure 1. -If needed, new standards for human exposure to Electromagnetic Fields,-if needed, new standards for acoustic safetyUse of spectrum* If neededScoped byequipmentclass or typeScoped by frequency and/or equipment typeDisability*Privacy*Fraud*No harm to the network*Emergency*Interworking via
the network*Interworking with the networkNon-radioRadio (RE)Non-TTETTE3.1b3.23.3c3.3b3.3a3.3d3.3e3.3fRadio Product EMCEN 301 489 muti-part EMC standardGeneric and product standards also notified under EMC DirectiveStandards also notified under LV Directive3.1aNew radio harmonized standardsSpectrumEMCSafety Figure 1: Modular structure for the various standards used under the R&TTE Directive [1] SIST EN 301 908-11 V2.3.1:2005
ETSI ETSI EN 301 908-11 V2.3.1 (2004-10) 8
The left hand edge of the figure 1 shows the different clauses of article 3 of the R&TTE Directive [1]. For article 3.3 various horizontal boxes are shown. Dotted lines indicate that at the time of publication of the present document essential requirements in these areas have to be adopted by the Commission. If such essential requirements are adopted, and as far and as long as they are applicable, they will justify individual standards whose scope is likely to be specified by function or interface type. The vertical boxes show the standards under article 3.2 for the use of the radio spectrum by radio equipment. The scopes of these standards are specified either by frequency (normally in the case where frequency bands are harmonized) or by radio equipment type. For article 3.1b figure 1 shows EN 301 489, the multi-part product EMC standard for radio used under the EMC Directive [2]. For article 3.1a figure 1 shows the existing safety standards currently used under the LV Directive [3] and new standards covering human exposure to electromagnetic fields. New standards covering acoustic safety may also be required. The bottom of figure 1 shows the relationship of the standards to radio equipment and telecommunications terminal equipment. A particular equipment may be radio equipment, telecommunications terminal equipment or both. A radio spectrum standard will apply if it is radio equipment. An article 3.3 standard will apply as well only if the relevant essential requirement under the R&TTE Directive [1] is adopted by the Commission and if the equipment in question is covered by the scope of the corresponding standard. Thus, depending on the nature of the equipment, the essential requirements under the R&TTE Directive [1] may be covered in a set of standards. The modularity principle has been taken because: • It minimizes the number of standards needed. Because equipment may, in fact, have multiple interfaces and functions it is not practicable to produce a single standard for each possible combination of functions that may occur in an equipment. • It provides scope for standards to be added: - under article 3.2 when new frequency bands are agreed; or - under article 3.3 should the Commission take the necessary decisions, without requiring alteration of standards that are already published. • It clarifies, simplifies and promotes the usage of Harmonized Standards as the relevant means of conformity assessment. The product specifications upon which this multi-part deliverable is based, differ in presentation, and this is reflected in the present document. SIST EN 301 908-11 V2.3.1:2005
ETSI ETSI EN 301 908-11 V2.3.1 (2004-10) 9
1 Scope The present document applies to the following radio equipment type: • Repeaters for IMT-2000 CDMA Direct Spread (UTRA FDD). This radio equipment type is capable of operating in all or any part of the frequency bands given below. Table 1: CDMA Direct Spread Repeater frequency bands Direction of transmission CDMA Direct Spread Repeater frequency bands Downlink 2 110 MHz to 2 170 MHz Uplink 1 920 MHz to 1 980 MHz
The present document is intended to cover the provisions of Directive 1999/5/EC (R&TTE Directive) [1] article 3.2, which states that "[…] radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of Article 3 of the R&TTE Directive will apply to equipment within the scope of the present document. NOTE: A list of such ENs is included on the web site http://www.newapproach.org 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. [1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). [2] Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of the Member States relating to electromagnetic compatibility (EMC Directive). [3] Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (LV Directive). [4] ETSI TR 100 028 (all parts) (V1.4.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics". [5] ETSI TS 125 143 (V5.8.0): "Universal Mobile Telecommunications System (UMTS); UTRA repeater; Conformance testing (3GPP TS 25.143 version 5.8.0 Release 5)". [6] ITU-R Recommendation SM.329-10 (2003): "Unwanted emissions in the spurious domain". [7] ETSI TS 125 141 (V5.8.0): "Universal Mobile Telecommunications System (UMTS); Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 5.8.0 Release 5)". SIST EN 301 908-11 V2.3.1:2005
ETSI ETSI EN 301 908-11 V2.3.1 (2004-10) 10 [8] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. [9] IEC 60068-2-1: "Environmental testing - Part 2: Tests. Tests A: Cold". [10] IEC 60068-2-2: "Environmental testing - Part 2: Tests. Tests B: Dry heat". 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in the R&TTE Directive [1] and the following apply: donor coupling loss: coupling loss between the repeater and the donor base station down-link: signal path where base station transmits and mobile receives maximum output power (Pmax): mean power level per carrier measured at the antenna connector of the repeater in specified reference condition operating band: frequency range that the repeater operates in with operational configuration NOTE 1: This frequency range can correspond to one or several consecutive nominal 5 MHz channels. If they are not consecutive each subset of channels shall be considered as an individual operating band. NOTE 2: The Repeater can have one or several operating bands. repeater: device that receives, amplifies and transmits the radiated or conducted RF carrier both in the down-link direction (from the base station to the mobile area) and in the up-link direction (from the mobile to the base station) up-link: signal path where mobile transmits and base station receives 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ACRR Adjacent Channel Rejection Ratio BTS Base Transceiver Station CW Continuous Wave (unmodulated signal) DUT Device Under Test FDD Frequency Division Duplexing MS Mobile Station R&TTE Radio and Telecommunications Terminal Equipment RF Radio Frequency RRC Root Raised Cosine TDD Time Division Duplexing UARFCN UTRA Absolute Radio Frequency Channel Number UE User Equipment UMTS Universal Mobile Telecommunications System UTRA UMTS Terrestrial Radio Access WCDMA Wideband Code Division Multiple Access SIST EN 301 908-11 V2.3.1:2005
ETSI ETSI EN 301 908-11 V2.3.1 (2004-10) 11 4 Technical requirements specifications 4.1 Environmental profile The technical requirements of the present document apply under the environmental profile for operation of the equipment, which shall be declared by the supplier. The equipment shall comply with all the technical requirements of the present document at all times when operating within the boundary limits of the declared operational environmental profile. For guidance on how a supplier can declare the environmental profile see annex C. 4.2 Conformance requirements 4.2.1 Introduction To meet the essential requirement under article 3.2 of the R&TTE Directive [1] for IMT-2000 repeater equipment five essential parameters in addition to those in part 1 have been identified. Table 2 provides a cross reference between these five essential parameters and the corresponding six technical requirements for equipment within the scope of the present document. Table 2: Cross references Essential parameter Corresponding technical requirements Spectrum emissions mask 4.2.2 Spectrum emissions mask Conducted spu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.