SIST EN 301 908-11 V3.2.1:2007
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks - Part 11: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks - Part 11: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive
The present document applies to the following radio equipment type:
• Repeaters for IMT-2000 CDMA Direct Spread (UTRA FDD). This radio equipment type is capable of operating in all or any part of the frequency bands given below.
The present document covers requirements for UTRA FDD Repeater from 3GPP Release 4, 5, 6 and 7. The present document is intended to cover the provisions of Directive 1999/5/EC [1] article 3.2, which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio communications and orbital resources so as to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of Article 3 of the R&TTE Directive may apply to equipment within the scope of the present document.
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Bazne postaje (BS), ponavljalniki (repetitorji) in uporabniška oprema (UE) za celična omrežja tretje generacije IMT-2000 - 11. del: Harmonizirani EN za IMT-2000, CDMA z neposrednim razprševanjem (“Direct Spread”) (UTRA FDD) (za ponavljalnike ( repetitorje)), ki zajema bistvene zahteve člena 3.2 direktive R&TTE
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 301 908-11 V3.2.1:2007
01-december-2007
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP (50 %D]QH
SRVWDMH %6 SRQDYOMDOQLNL UHSHWLWRUML LQXSRUDEQLãNDRSUHPD 8( ]DFHOLþQD
RPUHåMDWUHWMHJHQHUDFLMH,07GHO +DUPRQL]LUDQL(1]D,07&'0$
]QHSRVUHGQLPUD]SUãHYDQMHP ³'LUHFW6SUHDG´ 875$)'' ]DSRQDYOMDOQLNH
UHSHWLWRUMH NL]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Base Stations (BS),
Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks -
Part 11: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters)
covering essential requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 301 908-11 Version 3.2.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 908-11 V3.2.1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 301 908-11 V3.2.1:2007
---------------------- Page: 2 ----------------------
SIST EN 301 908-11 V3.2.1:2007
ETSI EN 301 908-11 V3.2.1 (2007-05)
Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE) for
IMT-2000 Third-Generation cellular networks;
Part 11: Harmonized EN for IMT-2000,
CDMA Direct Spread (UTRA FDD) (Repeaters)
covering essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 3 ----------------------
SIST EN 301 908-11 V3.2.1:2007
2 ETSI EN 301 908-11 V3.2.1 (2007-05)
Reference
REN/ERM-TFES-003-11
Keywords
3G, 3GPP, digital, IMT-2000, regulation,
repeater, testing, UMTS, WCDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2007.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 301 908-11 V3.2.1:2007
3 ETSI EN 301 908-11 V3.2.1 (2007-05)
Contents
Intellectual Property Rights.5
Foreword.5
Introduction .6
1 Scope.7
2 References.7
3 Definitions and abbreviations.8
3.1 Definitions.8
3.2 Abbreviations.8
4 Technical requirements specifications.9
4.1 Environmental profile.9
4.2 Conformance requirements.9
4.2.1 Introduction.9
4.2.2 Spectrum emissions mask.10
4.2.2.1 Definition.10
4.2.2.2 Limit.10
4.2.2.3 Conformance.11
4.2.3 Spurious emissions.11
4.2.3.1 Definition.11
4.2.3.2 Limit.12
4.2.3.2.1 Spurious emissions.12
4.2.3.2.2 Co-existence with GSM 900.13
4.2.3.2.3 Co-existence with DCS 1800 .14
4.2.3.2.4 Co-existence with services in adjacent frequency bands.14
4.2.3.2.5 Co-existence with UTRA-TDD.14
4.2.3.2.6 Protection of UTRA-FDD BS in the operating band.15
4.2.3.2.7 Co-existence with UTRA-FDD.15
4.2.3.3 Conformance.16
4.2.4 Maximum output power.16
4.2.4.1 Definition.16
4.2.4.2 Limit.16
4.2.4.3 Conformance.17
4.2.5 Input intermodulation.17
4.2.5.1 Definition.17
4.2.5.2 Limit.17
4.2.5.2.1 General input intermodulation requirement.17
4.2.5.2.2 Co-existence with GSM 900 and/or DCS 1800.18
4.2.5.2.3 Co-existence with UTRA-FDD.18
4.2.5.3 Conformance.19
4.2.6 Out of band gain .19
4.2.6.1 Definition.19
4.2.6.2 Limits.19
4.2.6.3 Conformance.19
4.2.7 Adjacent Channel Rejection Ratio.20
4.2.7.1 Definition.20
4.2.7.2 Limit.20
4.2.7.3 Conformance.20
4.2.8 Output intermodulation.20
4.2.8.1 Definition.20
4.2.8.2 Limit.20
4.2.8.3 Conformance.20
5 Testing for compliance with technical requirements.21
5.1 Environmental conditions for testing .21
5.2 Interpretation of the measurement results .21
ETSI
---------------------- Page: 5 ----------------------
SIST EN 301 908-11 V3.2.1:2007
4 ETSI EN 301 908-11 V3.2.1 (2007-05)
5.3 Essential radio test suites.22
5.3.1 Spectrum emission mask.22
5.3.1.1 Initial conditions.22
5.3.1.2 Procedures.23
5.3.2 Spurious emissions.23
5.3.2.1 Initial conditions.23
5.3.2.2 Procedure.23
5.3.3 Maximum output power.24
5.3.3.1 Initial conditions.24
5.3.3.2 Procedure.24
5.3.4 Input intermodulation.24
5.3.4.1 Initial conditions.24
5.3.4.2 Procedures.24
5.3.5 Out of band gain .25
5.3.5.1 Initial conditions.25
5.3.5.2 Procedure.25
5.3.6 Adjacent Channel Rejection Ratio.25
5.3.6.1 Initial conditions.25
5.3.6.2 Procedures.25
5.3.7 Output intermodulation.26
5.3.7.1 Initial conditions.26
5.3.7.2 Procedures.26
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT).27
Annex B (normative): Repeater configurations .29
B.1 Power supply.29
B.2 Power supply options .29
B.3 Combining of Repeaters.29
Annex C (informative): Environmental profile specification .30
Annex D (informative): The EN title in the official languages .31
Annex E (informative): Bibliography.33
History .34
ETSI
---------------------- Page: 6 ----------------------
SIST EN 301 908-11 V3.2.1:2007
5 ETSI EN 301 908-11 V3.2.1 (2007-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [6] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
The present document is part 11 of a multi-part deliverable covering the Base Stations (BS), Repeaters and User
Equipment (UE) for IMT-2000 Third-Generation cellular networks, as identified below:
Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 2: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 4: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 5: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS and Repeaters) covering essential
requirements of article 3.2 of the R&TTE Directive";
Part 6: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 7: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of
article 3.2 of the R&TTE Directive";
Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements
of article 3.2 of the R&TTE Directive";
Part 10: "Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of
the R&TTE Directive";
Part 11: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential
requirements of article 3.2 of the R&TTE Directive";
ETSI
---------------------- Page: 7 ----------------------
SIST EN 301 908-11 V3.2.1:2007
6 ETSI EN 301 908-11 V3.2.1 (2007-05)
Part 12: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeater) covering essential
requirements of article 3.2 of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 27 April 2007
Date of latest announcement of this EN (doa): 31 July 2007
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2008
Date of withdrawal of any conflicting National Standard (dow): 31 January 2009
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive. The modular
structure is shown in EG 201 399.
ETSI
---------------------- Page: 8 ----------------------
SIST EN 301 908-11 V3.2.1:2007
7 ETSI EN 301 908-11 V3.2.1 (2007-05)
1 Scope
The present document applies to the following radio equipment type:
• Repeaters for IMT-2000 CDMA Direct Spread (UTRA FDD).
This radio equipment type is capable of operating in all or any part of the frequency bands given below.
Table 1: CDMA Direct Spread Repeater frequency bands
Operating Band Direction of transmission CDMA Direct Spread Repeater frequency bands
I Downlink 2 110 MHz to 2 170 MHz
Uplink 1 920 MHz to 1 980 MHz
III Downlink 1 805 MHz to 1 880 MHz
Uplink 1 710 MHz to 1 785 MHz
VII Downlink 2 620 MHz to 2 690 MHz
Uplink 2 500 MHz to 2 570 MHz
VIII Downlink 925 MHz to 960 MHz
Uplink 880 MHz to 915 MHz
The present document covers requirements for UTRA FDD Repeater from 3GPP Release 4, 5, 6 and 7.
The present document is intended to cover the provisions of Directive 1999/5/EC [1] article 3.2, which states that "…
radio equipment shall be so constructed that it effectively uses the spectrum allocated to terrestrial/space radio
communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of Article 3 of the R&TTE Directive may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
[1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[2] ETSI TR 100 028 (all parts) (V1.4.1): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Uncertainties in the measurement of mobile radio equipment characteristics".
[3] ETSI TS 125 143 (V7.2.0): "Universal Mobile Telecommunications System (UMTS); UTRA
repeater conformance testing (3GPP TS 25.143 version 7.2.0 Release 7)".
ETSI
---------------------- Page: 9 ----------------------
SIST EN 301 908-11 V3.2.1:2007
8 ETSI EN 301 908-11 V3.2.1 (2007-05)
[4] ITU-R Recommendation SM.329-10 (2003): "Unwanted emissions in the spurious domain".
[5] ETSI TS 125 141 (V7.6.0): "Universal Mobile Telecommunications System (UMTS); Base
Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 7.6.0 Release 7)".
[6] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[7] IEC 60068-2-1: "Environmental testing - Part 2-1: Tests. Tests A: Cold".
[8] IEC 60068-2-2: "Environmental testing - Part 2-2: Tests. Tests B: Dry heat".
[9] ETSI EN 301 908-1 (V3.2.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular
networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements,
covering essential requirements of article 3.2 of the R&TTE Directive".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [1] and the following
apply:
donor coupling loss: coupling loss between the Repeater and the donor base station
down-link: signal path where base station transmits and mobile receives
maximum output power (Pmax): mean power level per carrier measured at the antenna connector of the Repeater in
specified reference condition
pass band: frequency range that the Repeater operates in with operational configuration
NOTE 1: This frequency range can correspond to one or several consecutive nominal 5 MHz channels. If they are
not consecutive each subset of channels has to be considered as an individual pass band.
NOTE 2: The Repeater can have one or several pass bands.
repeater: device that receives, amplifies and transmits the radiated or conducted RF carrier both in the down-link
direction (from the base station to the mobile area) and in the up-link direction (from the mobile to the base station)
up-link: signal path where mobile transmits and base station receives
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
ACLR Adjacent Channel Leakage power Ratio
ACRR Adjacent Channel Rejection Ratio
BS Base Station
BTS Base Transceiver Station
CW Continuous Wave
NOTE: Unmodulated signal.
DCS Digital Cellular System
DUT Device Under Test
EUT Equipment Under Test
FDD Frequency Division Duplexing
GSM Global System for Mobile Communications
IMT-2000 International Mobile Telecommunications 2000
ETSI
---------------------- Page: 10 ----------------------
SIST EN 301 908-11 V3.2.1:2007
9 ETSI EN 301 908-11 V3.2.1 (2007-05)
MS Mobile Station
PCCPCH Primary Common Control Physical CHannel
R&TTE Radio and Telecommunications Terminal Equipment
RF Radio Frequency
RMS Root Mean Square
RRC Root Raised Cosine
SCCPCH Secondary Common Control Physical CHannel
TDD Time Division Duplexing
UARFCN UTRA Absolute Radio Frequency Channel Number
UE User Equipment
UMTS Universal Mobile Telecommunications System
UTRA UMTS Terrestrial Radio Access
WCDMA Wideband Code Division Multiple Access
4 Technical requirements specifications
4.1 Environmental profile
The technical requirements of the present document apply under the environmental profile for operation of the
equipment, which shall be declared by the supplier. The equipment shall comply with all the technical requirements of
the present document at all times when operating within the boundary limits of the declared operational environmental
profile.
For guidance on how a supplier can declare the environmental profile see annex C.
4.2 Conformance requirements
The requirements in the present document are based on the assumption that the operating band (e.g. band I, III, VII and
VIII) is shared between systems of the IMT-2000 family (for band III and VIII also GSM) or systems having
compatible characteristics.
4.2.1 Introduction
To meet the essential requirement under article 3.2 of the R&TTE Directive [1] for IMT-2000 Repeater equipment five
essential parameters in addition to those in EN 301 908-1 [9] have been identified. Table 2 provides a cross reference
between these five essential parameters and the corresponding six technical requirements for equipment within the
scope of the present document.
Table 2: Cross references
Essential parameter Corresponding technical requirements
Spectrum emissions mask 4.2.2 Spectrum emissions mask
Conducted spurious emissions from the antenna connector 4.2.3 Spurious emissions
Accuracy of maximum output power 4.2.4 Maximum output power
Receiver immunity 4.2.5 Input intermodulation
4.2.6 Out of band gain
4.2.7 Adjacent Channel Rejection Ratio
Intermodulation attenuation of the output 4.2.8 Output intermodulation
The supplier shall declare operating band(s) for the Repeater. The technical requirements apply for the declared
operating band(s) as outlined for each requirement. For a Repeater supporting more than one operating band,
conformance testing for each technical requirement in clause 5 shall be performed. for each operating band.
The technical requirements also apply to Repeater configurations described in annex
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.