SIST EN 4500-005:2014

Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels

This European Standard specifies the specific rules for the drafting and presentation of steels material standards for aerospace applications. It should be used in conjunction with EN 4500-001.

Luft- und Raumfahrt - Metallische Werkstoffe - Regeln für das Erstellen und die Gestaltung von Werkstoffnormen - Teil 005: Besondere Regeln für Stähle

Diese Norm legt die allgemeinen Regeln für das Erstellen und die Gestaltung von Werkstoffnormen für Stähle zur Anwendung in der Luft- und Raumfahrt fest.
Sie ist in Verbindung mit EN 4500-001 zu verwenden.

Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation des normes de matériaux - Partie 005: Règles spécifiques aux aciers

Cette norme Européenne spécifie les règles spécifiques pour la rédaction et la présentation des normes de
matériaux aciers pour applications aérospatiales.
Elle doit être utilisée conjointement avec l’EN 4500-001.

Aeronavtika - Kovinski materiali - Pravila za načrtovanje in predstavljanje standarov za materiale - 005. del: Posebna pravila za jekla

General Information

• Status: Published
• Publication Date: 10-Feb-2014
• ICS: 49.025.10 - Steels
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 13-Jan-2014
• Due Date: 20-Mar-2014
• Completion Date: 11-Feb-2014
• Ref Project: EN 4500-005:2012 - Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels

Relations

• Revises: oSIST prEN 4500-005:2022 - Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels
• Effective Date: 18-Jan-2023
• Revises: oSIST prEN 4500-005:2022 - Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels
• Effective Date: 19-Jan-2023
• Revised: oSIST prEN 4500-005:2022 - Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels
• Effective Date: 02-Sep-2020

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VWDYOMDQMHLuft- und Raumfahrt - Metallische Werkstoffe - Regeln für das Erstellen und die Gestaltung von Werkstoffnormen - Teil 005: Besondere Regeln für StähleSérie aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation des normes de matériaux - Partie 005: Règles spécifiques aux aciersAerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 4500-005:2012SIST EN 4500-005:2014en01-marec-2014SIST EN 4500-005:2014SLOVENSKI
STANDARD



SIST EN 4500-005:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4500-005
October 2012 ICS 49.025.10 English Version
Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels
Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation des normes de matériaux - Partie 005: Règles spécifiques aux aciers
Luft- und Raumfahrt - Metallische Werkstoffe - Regeln für das Erstellen und die Gestaltung von Werkstoffnormen - Teil 005: Besondere Regeln für Stähle This European Standard was approved by CEN on 23 June 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4500-005:2012: ESIST EN 4500-005:2014



EN 4500-005:2012 (E) 2 Contents Page Foreword .3Introduction .41Scope .42Normative references .43Terms and definitions .44Rules for drafting and presentation .4Bibliography . 20 SIST EN 4500-005:2014



EN 4500-005:2012 (E) 3 Foreword This document (EN 4500-005:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2013, and conflicting national standards shall be withdrawn at the latest by April 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 4500-005:2014



EN 4500-005:2012 (E) 4 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organisation of this series is described in EN 4258. 1 Scope This European Standard specifies the specific rules for the drafting and presentation of steels material standards for aerospace applications. It should be used in conjunction with EN 4500-001. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 4258, Aerospace series — Metallic materials — General organization of standardization — Links between types of EN standards and their use EN 4500-001, Aerospace series — Metallic materials — Rules for drafting and presentation of material standards — Part 001: General rules EN 10083-1, Steels for quenching and tempering — Part 1: general technical delivery conditions 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4500-001 apply. 4 Rules for drafting and presentation 4.1 Page 1 – Title 4.1.1 General See EN 4500-001 and Example 1 of this standard. The following are examples of descriptions which shall be used. SIST EN 4500-005:2014



EN 4500-005:2012 (E) 5 4.1.2 Method of melting Complete in accordance with EN 4500-001 using one or more of the following terms:  air melted;  vacuum induction melted;  vacuum refined;  vacuum arc remelted;  electro-slag remelted;  consumable electrode remelted. 4.1.3 Form entries a) sheet, strip, plate; The terms may be qualified with one of the following terms:  rolled;  cold rolled;  hot rolled. b) bar; The term may be qualified with one or more of the following terms:  rolled;  hot rolled;  cold rolled;  drawn;  extruded;  forged. c) section; The term may be qualified with one or more of the following terms:  rolled;  hot rolled;  cold rolled;  drawn;  extruded;  forged. SIST EN 4500-005:2014



EN 4500-005:2012 (E) 6 d) tube; The term may be qualified with one or more of the following terms:  rolled;  drawn;  extruded;  seamless;  welded. e) wire; The term may be qualified with one or more of the following terms:  hot drawn;  cold drawn;  hot rolled;  cold rolled. f) forging stock; g) forgings; h) remelting stock; i) castings; The term may be qualified with one or more of the following terms:  sand;  chill;  investment;  centrifugal;  hot isostatically pressed (hipped). j) ring; The term may be qualified with one or more of the following terms:  rolled;  forged;  welded. SIST EN 4500-005:2014



EN 4500-005:2012 (E) 7 4.1.4 Additional information entries  for structural applications;  for pressure applications;  for the manufacture and fasteners;  for the manufacture of rivets;  for machining;  for forged rings;  for rolled rings;  for welding;  for the manufacture of bearings;  for carburizing or other thermo-chemical treatment;  for nitriding. 4.2 Page 2 See EN 4500-001. 4.3 Page 3 See EN 4500-001 and Example 2 of this standard. 4.4 Page 4 4.4.1 Page 4, line 1: Material designation See EN 4500-001 and Example 3 of this standard. 4.4.2 Page 4, line 2: Chemical composition The chemical composition shall be written in accordance with EN 4500-001 and the order of presentation of elements shall conform to the following rules:  C, Si, Mn, P, S, Cr, Mo, Ni;  Al, As, B, Co, Cu, N, Nb, Pb, Sn, Ti, V, W, Zr;  all other elements except hydrogen shall be written in alphabetical order of their chemical symbols;  H;  ratio and/or total of above elements. SIST EN 4500-005:2014



EN 4500-005:2012 (E) 8 4.4.3 Page 4, line 3: Method of melting See EN 4500-001 and Example 3 of this standard, using the terms listed in 4.1.2. 4.4.4 Page 4, line 4.1: Form See EN 4500-001 and Example 3 of this standard. 4.4.5 Page 4, line 4.2: Method of production See EN 4500-001 and Example 3 of this standard, using the applicable terms given in 4.1. 4.4.6 Page 4, line 4.3: Limit dimension(s) See EN 4500-001 and Example 3 of this standard. For steels, the equivalent diameter De for determining the limiting dimensions is obtained as follows:  for uniform single shapes, use the information given in EN 10083-1;  for non-uniform shapes, use the procedure given in EN 10083-1. 4.4.7 Page 4, line 5: Technical specification See EN 4500-001 and Example 3 of this standard. 4.4.8 Page 4, line 6.1: Delivery condition and Heat treatment See EN 4500-001 and Example 3 of this standard. Use one or more of the following terms:  not heat treated;  softened;  annealed;  solution treated;  precipitation treated;  hardened;  tempered;  sub-zero treated;  cold worked;  descaled;  machined  ground. 4.4.9 Page 4, line 6.2: Delivery condition code See EN 4500-001 and Example 3 of this standard. SIST EN 4500-005:2014



EN 4500-005:2012 (E) 9 4.4.10 Page 4, line 7: Use condition and Heat treatment See EN 4500-001 and Example 3 of this standard. Use the terms given in 4.4.8 or state:  Delivery condition. 4.4.11 Page 4, line 8.1: Test sample(s) See EN 4500-001 and Example 3 of this standard. 4.4.12 Page 4, line 8.2: Test piece(s) See EN 4500-001 and Example 3 of this standard. 4.4.13 Page 4, line 8.3: Heat treatment See EN 4500-001 and Example 3 of this standard. 4.4.14 Page 4, line 9: Dimensions concerned See EN 4500-001 and Example 3 of this standard. 4.4.15 Page 4, line 10: Thickness of cladding on each face Not applicable to steel. 4.4.16 Page 4, line 11: Direction of test piece See EN 4500-001 and Example 3 of this standard. 4.4.17 Page 4, lines 12 to 16: Tensile (T) See EN 4500-001 and Example 3 of this standard. 4.4.18 Page 4, line 17: Hardness See EN 4500-001 and Example 3 of this standard. 4.4.19 Page 4, line 18: Shear strength See EN 4500-001 and Example 3 of this standard. 4.4.20 Page 4, line 19: Bending
See EN 4500-001 and Example 3 of this standard. 4.4.21 Page 4, line 20: Impact strength See EN 4500-001 and Example 3 of this standard. 4.4.22 Page 4, lines 21 to 26: Creep (C) See EN 4500-001 and Example 3 of this standard. SIST EN 4500-005:2014



EN 4500-005:2012 (E) 10 4.4.23 Page 4, line 27: Notes (see line 98) See EN 4500-001 and Example 3 of this standard. 4.5 Page 5, lines 28 to 99 4.5.1 Page 5, line 29: Reference heat treatment See EN 4500-001 and Example 4 of this standard. 4.5.2 Page 5, lines 30 to 94 The relevant lines shall be completed in accordance with EN 4500-001, see Example 4 of this
...