SIST EN 15695-2:2010

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures

This European Standard is applicable to filters as part of cabs of categories 2, 3 and 4 of agricultural and forestry tractors and self-propelled sprayers as specified in EN 15695-1 in order to limit the exposure of the operator (driver) to hazardous substances, in agricultural and forestry operations. It specifies requirements, test procedures and the information to be provided by the filter manufacturer. This standard does not cover: the exposure linked to fumigants; the category of cab and performance level to be used for any particular application; the actual cab performance in the field applications; field durability of filters or filtration systems. This document is not applicable to filters which are manufactured before the date of its publication as EN.

Landwirtschaftliche Traktoren und selbstfahrende Pflanzenschutzgeräte - Schutz vor gefährlichen Stoffen - Teil 2: Filter, Anforderungen und Prüfverfahren

Diese Europäische Norm ist auf Filter anwendbar, die in Kabinen der Kategorien 2, 3 und 4 von landwirtschaftlichen
Traktoren und selbstfahrenden Pflanzenschutzgeräten, wie in EN 15695-1 angegeben, eingebaut
werden, um die Belastung der Bedienungsperson (Fahrer) durch gefährliche Substanzen bei land- und
forstwirtschaftlichen Arbeiten zu begrenzen. Sie definiert Anforderungen und Prüfverfahren sowie die
Information, die von dem Hersteller des Filters zur Verfügung zu stellen ist.
Dieses Dokument behandelt nicht:
⎯ die Belastung durch Begasungsmittel;
⎯ die Kabinen-Kategorie oder das Schutzniveau, die bzw. das bei einer speziellen Anwendung zu
verwenden ist;
⎯ das tatsächliche Leistungsvermögen der Kabine beim Feldeinsatz;
⎯ Haltbarkeit von Filtern unter praktischen Bedingungen.
Dieses Dokument ist nicht anwendbar auf Kabinen von Traktoren, die vor der Veröffentlichung als EN
hergestellt wurden.

Tracteurs agricoles et pulvérisateurs automoteurs - Protection de l'opérateur (conducteur) contre les substances dangereuses - Partie 2: Filtres, exigences et méthodes d'essai

La présente Norme européenne s'applique aux filtres à installer dans les cabines de catégories 2, 3 et 4 de tracteurs agricoles et forestiers ou de pulvérisateurs automoteurs, spécifiées dans l'EN 15695-1, afin de limiter l'exposition de l'opérateur (conducteur) aux substances dangereuses lors des travaux agricoles et de sylviculture. Elle spécifie les exigences, les méthodes d'essai et les informations à fournir par le fabricant du filtre.
La présente norme ne traite pas :
   de l'exposition liée aux fumigants ;
   de la catégorie de cabine et du niveau de performance à utiliser pour une application particulière donnée ;
   des performances réelles de la cabine dans le cas d'applications au champ ;
   de la durabilité des filtres ou des systèmes de filtration.
Le présent document ne s'applique pas aux filtres fabriqués avant sa date de publication en tant qu'EN.

Kmetijski traktorji in stroji z lastnim pogonom za zaščito rastlin - Zaščita upravljavca (voznika) pred nevarnimi snovmi - 2. del: Filtri, zahteve in postopki preskušanja

Ta evropski standard velja za filtre, ki so del kabin kategorij 2, 3 in 4 kmetijskih in gozdarskih strojev in strojev z lastnim pogonom za zaščito rastlin, kot so določene v EN 15695-1 z namenom omejiti izpostavljenost upravljavca (voznika) nevarnim snovem pri kmetijskih in gozdarskih dejavnostih. Opredeljuje zahteve, preskusne postopke in podatke, ki jih mora zagotoviti proizvajalec filtra. Ta standard ne zajema: izpostavljenost, ki se navezuje na fumigante; kategorije kabine in ravni delovanja, ki se uporabljajo pri katerem koli določenemu načinu uporabe; dejansko delovanje kabine pri uporabi na terenu; vzdržljivosti filtrov oziroma filtrirnih sistemov na terenu. Ta dokument ne velja za filtre, ki so bili proizvedeni pred datumom, ko je bil objavljen kot EN.

General Information

• Status: Withdrawn
• Public Enquiry End Date: 19-Oct-2007
• Publication Date: 13-Jun-2010
• Withdrawal Date: 14-Sep-2017
• ICS: 65.060.10 - Agricultural tractors and trailed vehicles
• Technical Committee: IMKG - Machinery for agriculture and forestry
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 14-Sep-2017
• Due Date: 07-Oct-2017
• Completion Date: 15-Sep-2017
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/399 - Mandate to CEN and CENELEC for standardisation in the field of agricultural tractors - Hazardous substances
• Ref Project: EN 15695-2:2009 - Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures

Relations

• Replaced By: SIST EN 15695-2:2017 - Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures
• Effective Date: 13-Sep-2017
• Replaced By: SIST EN 15695-2:2017 - Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures
• Effective Date: 08-Jun-2022
• Corrected By: SIST EN 15695-2:2010/AC:2012 - Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures
• Effective Date: 08-Jun-2022
• Corrected By: SIST EN 15695-2:2010/AC:2012 - Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures
• Effective Date: 15-Oct-2011
• Revised: SIST EN 15695-2:2017 - Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures
• Effective Date: 01-Jan-2016

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SUHVNXãDQMDLandwirtschaftliche Traktoren und selbstfahrende Pflanzenschutzgeräte - Schutz vor gefährlichen Stoffen - Teil 2: Filter, Anforderungen und PrüfverfahrenTracteurs agricoles et pulvérisateurs automoteurs - Protection de l'opérateur (conducteur) contre les substances dangereuses - Partie 2: Filtres, exigences et méthodes d'essaiAgricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures65.060.10Kmetijski traktorji in prikoliceAgricultural tractors and trailed vehiclesICS:Ta slovenski standard je istoveten z:EN 15695-2:2009SIST EN 15695-2:2010en,fr,de01-julij-2010SIST EN 15695-2:2010SLOVENSKI
STANDARD



SIST EN 15695-2:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15695-2
November 2009 ICS 65.060.10 English Version
Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures
Tracteurs agricoles et pulvérisateurs automoteurs - Protection de l'opérateur (conducteur) contre les substances dangereuses - Partie 2: Filtres, exigences et méthodes d'essai
Landwirtschaftliche Traktoren und selbstfahrende Arbeitsmaschinen - Schutz vor gefährlichen Stoffen -Teil 2: Luftreinigungseinrichtungen This European Standard was approved by CEN on 24 October 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15695-2:2009: ESIST EN 15695-2:2010



EN 15695-2:2009 (E) 2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .53 Requirements and test procedures .63.1 Pre-test vibration conditioning .63.2 Dust filter .63.2.1 Requirements .63.2.2 Test procedure .63.3 Aerosol filter .63.3.1 Requirements .63.3.2 Test procedure .63.4 Vapour filter .73.4.1 Requirements .73.4.2 Test procedure .74 Information for use .7Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Machinery Directive 98/37/EC, amended by Directive 98/79/EC .8Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC .9 SIST EN 15695-2:2010



EN 15695-2:2009 (E) 3 Foreword This document (EN 15695-2:2009) has been prepared by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by May 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document. EN 15695, Agricultural tractors and self-propelled sprayers – Protection of the operator (driver) against hazardous substances, consists of the following parts:  Part 1: Cab classification, requirements and test procedures  Part 2: Filters, requirements and test procedures According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 15695-2:2010



EN 15695-2:2009 (E) 4 Introduction This document is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this European Standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. When operating self-propelled sprayers and tractors the operator can be exposed to hazardous substances such as dust, aerosols or vapours (for example during the application of plant protection products or fertilisers). Cabs of agricultural tractors and self-propelled sprayers providing protection against these substances may respectively be used to reduce operator exposure to air-borne contaminants generated during farming operations.
With regard to the application of plant protection products (PPP) the operator can be exposed to risks:
 before the actual spraying operation (e.g. handling of PPP cans/packages, spray tank filling, sprayer adjustment);  during the spraying operation (e.g. on the tractor or self-propelled sprayer with/without cab, when working at the spray
...