Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star Quad 100 ohms - Type KD - Product standard

This standard specifies the dimensions, tolerances, required characteristics and the mass of an AWG 24 shielded quad cable, type KD, intended for high speed (100 Mbit/s) full duplex Ethernet networks. Linked to this particular application, the operating temperatures of the cable are between - 65 °C and 125 °C. This cable is laser markable, this marking satisfies the requirements of EN 3838. The characteristics impedance must be (100 ± 15) Ω.

Luft- und Raumfahrt - Elektrische Leitungen für Digitaldatenübertragungen - Teil 008: Einfach geschirmt - Quad 100 Ohm - Typ KD - Produktnorm

Diese Norm legt die Maße, die Grenzabmaße, die Anforderungen und die Masse eines AWG 24-Quadkabels,
einfach geschirmt, Typ KD, für schnelle Duplex-Ethernet-Netze (100 Mbit/s) fest.
Für diesen speziellen Anwendungsfall liegen die Betriebstemperaturen der Leitungen zwischen 65 °C und
125 °C.
Diese Leitung ist Laser-bedruckbar, sie entspricht den Anforderungen der EN 3838.
Der Wellenwiderstand muss (100  15)  betragen.

Série aérospatiale - Câbles électriques pour transmission de données numériques - Partie 008: Simple tresse - Quarte en étoile 100 Ohms - Type KD - Norme de produit

Aeronavtika - Električni kabli za digitalni prenos podatkov - 008. del: Enojni oplet - Štirižilni zvezdasti kabel, 100 ohmov (Quad cable) - Tip KD - Standard za proizvod

General Information

Status
Withdrawn
Publication Date
19-Apr-2009
Withdrawal Date
22-Feb-2024
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-Feb-2024
Due Date
15-Mar-2024
Completion Date
23-Feb-2024

Relations

Buy Standard

Standard
EN 3375-008:2009 - BARVE
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Leitungen für Digitaldatenübertragungen - Teil 008: Einfach geschirmt - Quad 100 Ohm - Typ KD - ProduktnormSérie aérospatiale - Câbles électriques pour transmission de données numériques - Partie 008: Simple tresse - Quarte en étoile 100 Ohms - Type KD - Norme de produitAerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star Quad 100 ohms - Type KD - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3375-008:2009SIST EN 3375-008:2009en01-maj-2009SIST EN 3375-008:2009SLOVENSKI
STANDARD



SIST EN 3375-008:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3375-008March 2009ICS 49.060 English VersionAerospace series - Cable, electrical, for digital data transmission- Part 008: Single braid - Star Quad 100 ohms - Type KD -Product standardSérie aérospatiale - Câbles électriques pour transmissionde données numériques - Partie 008: Simple tresse -Quarte en étoile 100 Ohms - Type KD - Norme de produitLuft- und Raumfahrt - Elektrische Leitungen fürDigitaldatenübertragungen - Teil 008: Einfach geschirmt -Quad 100 Ohm - Typ KD - ProduktnormThis European Standard was approved by CEN on 30 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3375-008:2009: ESIST EN 3375-008:2009



EN 3375-008:2009 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Required characteristics .4 5 Tests .6 6 Quality assurance . 11 7 Identification and marking (according to EN 3375-002 and TR 6058) . 11 8 Packaging . 12 9 Technical specification . 12
SIST EN 3375-008:2009



EN 3375-008:2009 (E) 3 Foreword This document (EN 3375-008:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2009, and conflicting national standards shall be withdrawn at the latest by September 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.