SIST EN 3155-017:2009

Aerospace series - Electrical contacts used in elements of connection - Part 017: Contacts, electrical, relay base, female, type A, crimp, class P - Product standard

This standard specifies the required characteristics, tests and tooling applicable to female electrical con-tacts 017, type A, crimp, class P, used in elements of connection (relay bases) according to EN 3155 002.
It shall be used together with EN 3155 001.
The associated male contacts are defined in the standards of relays associated to the relay bases listed in EN 3155 002.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 017: Elektrische Buchsenkontakte, Steckfassung für Relais, Typ A, crimpbar, Klasse P - Produktnorm

Diese Norm legt die Anforderungen, Prüfungen und Werkzeuge für elektrische Buchsenkontakte 017, Typ A, crimpbar, Klasse P, zur Verwendung in elektrischen Verbindungselementen (Steckfassungen für Relais) nach EN 3155 002 fest.
Sie ist in Verbindung mit EN 3155 001 anzuwenden.
Die zugehörigen Stiftkontakte sind in den Normen über die Relais festgelegt, die den in EN 3155 002 aufge¬führten Steckfassungen für Relais zugeordnet sind.

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 017 : Contacts électriques, pour socles de relais, femelles, type A, à sertir, classe P - Norme de produit

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 017. del: Kontakti, električni, podnožje za rele, ženski, tip A, nagubani, razred P - Standard za proizvod

General Information

• Status: Withdrawn
• Publication Date: 15-Dec-2008
• Withdrawal Date: 22-Jan-2020
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 23-Jan-2020
• Due Date: 15-Feb-2020
• Completion Date: 23-Jan-2020
• Ref Project: EN 3155-017:2006 - Aerospace series - Electrical contacts used in elements of connection - Part 017: Contacts, electrical, relay base, female, type A, crimp, class P - Product standard

Relations

• Replaced By: SIST EN 3155-017:2020 - Aerospace series - Electrical contacts used in elements of connection - Part 017: Contacts, electrical, relay base, female, type A, crimp, class P - Product standard
• Effective Date: 21-Jan-2020
• Revised: SIST EN 3155-017:2020 - Aerospace series - Electrical contacts used in elements of connection - Part 017: Contacts, electrical, relay base, female, type A, crimp, class P - Product standard
• Effective Date: 24-Aug-2016

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 017: Elektrische Buchsenkontakte, Steckfassung für Relais, Typ A, crimpbar, Klasse P - ProduktnormSérie aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 017 : Contacts électriques, pour socles de relais, femelles, type A, à sertir, classe P - Norme de produitAerospace series - Electrical contacts used in elements of connection - Part 017: Contacts, electrical, relay base, female, type A, crimp, class P - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3155-017:2006SIST EN 3155-017:2009en01-februar-2009SIST EN 3155-017:2009SLOVENSKI
STANDARD



SIST EN 3155-017:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3155-017July 2006ICS 49.060 English VersionAerospace series - Electrical contacts used in elements ofconnection - Part 017: Contacts, electrical, relay base, female,type A, crimp, class P - Product standardSérie aérospatiale - Contacts électriques utilisés dans lesorganes de connexion - Partie 017 : Contacts électriques,pour socles de relais, femelles, type A, à sertir, classe P -Norme de produitLuft- und Raumfahrt - Elektrische Kontakte zur Verwendungin Verbindungselementen - Teil 017: ElektrischeBuchsenkontakte, Steckfassung für Relais, Typ A,crimpbar, Klasse P - ProduktnormThis European Standard was approved by CEN on 6 January 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3155-017:2006: ESIST EN 3155-017:2009



EN 3155-017:2006 (E) 2 Contents Page Foreword.3 0 Introduction.4 1 Scope.4 2 Normative references.4 3 Definitions.5 4 Required characteristics.5 5 Designation.10 6 Marking.10 7 Technical specification.10
SIST EN 3155-017:2009



EN 3155-017:2006 (E) 3 Foreword This European Standard (EN 3155-017:2006) has been prepared by the AeroSpace and Defense Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-ceived the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer-land and the United Kingdom. SIST EN 3155-017:2009



EN 3155-017:2006 (E) 4 0 Introduction The contacts defined by this standard are derived from those of MIL-C-39029/92. 1 Scope This standard specifies the required characteristics, tests and tooling applicable to female electrical con-tacts 017, type A, crimp, class P, used in elements of connection (relay bases) according to EN 3155-002. It shall be used together with EN 3155-001. The associated male contacts are defined in the standards of relays associated to the relay bases listed in EN 3155-002. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 8843, Aircraft — Crimp-removable contacts for electrical connectors — Identification system EN 2083; Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard EN 2591 (series), Aerospace series — Elements of electrical and optical connection — Test methods EN 3155-001, Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical specification EN 3155-002, Aerospace series — Electrical contacts used in elements of connection — Part 002: List and utilization of contacts MIL-DTL-22520, Crimping tools, terminal, hand or power actuated, wire termination, and tool kits, general specification for 1) MIL-C-22520/1, Crimping tools, terminal, hand, wire termination for wire barrel sizes 12 through 201) MIL-C-22520/2, Crimping tools, terminal, hand, wire termination for wire barrel sizes 20 through 281) MIL-C-22520/7, Crimping tools, terminal, hand, wire termination for wire barrel sizes 16, 20 and 221) MIL-C-39029, Contacts, electrical connector, general specification for1) MIL-C-39029/92, Contacts, electrical connector, socket, crimp removable, (for MIL-R-6106 and MIL-S-12833/40 and /41 relay sockets) 1) MIL-I-81969, Installin
...