SIST EN 14058:2018/kprA1:2022
(Amendment)Protective clothing - Garments for protection against cool environments
Protective clothing - Garments for protection against cool environments
This European Standard specifies requirements and test methods for the performance of garments for protection against the effects of cool environments above −5 °C (see Annex C). These effects comprise not only low air temperatures, but also humidity and air velocity.
Cold protective ensembles are excluded from this standard.
The protective effects and requirements of footwear, gloves and separate head wear are excluded from the scope of this standard.
Schutzkleidung - Kleidungsstücke zum Schutz gegen kühle Umgebungen
Habillement de protection - Vêtements de protection contre les environnements frais
Varovalna obleka - Oblačila za zaščito v hladnih okoljih - Dopolnilo A1
General Information
- Status
- Not Published
- Public Enquiry End Date
- 19-Apr-2021
- Technical Committee
- OVP - Personal protecting equipment
- Current Stage
- 98 - Abandoned project (Adopted Project)
- Start Date
- 12-Jun-2023
- Due Date
- 17-Jun-2023
- Completion Date
- 12-Jun-2023
- Mandate
- M/PPE - PPE
Relations
- Merged Into
SIST EN 14058:2018+A1:2023 - Protective clothing - Garments for protection against cool environments - Effective Date
- 01-Jul-2023
- Effective Date
- 01-Apr-2021
Overview
EN 14058:2017/FprA1 is a CEN European standard for protective clothing - garments for protection against cool environments. It specifies performance requirements and test methods for garments intended to protect wearers from the effects of cool environments above −5 °C, taking into account not only low air temperature but also humidity and air velocity. The standard excludes cold protective ensembles as well as the protective performance requirements for footwear, gloves and separate headwear.
This draft amendment (prA1) updates normative references and several test clauses to align the standard with more recent ISO-based test methods and clarifies informative annexes that relate the standard to EU PPE regulations.
Key topics and technical requirements
- Scope and limits: Protection is defined for environments above −5 °C; ensembles for more severe cold are excluded.
- Performance testing: Specifies laboratory test methods for assessing garment performance, including:
- Resistance to water penetration (WP) - updated to reference EN ISO 811:2018 (hydrostatic pressure test).
- Burst strength of knitted outer shell material - updated to reference EN ISO 13938-1:2019 and EN ISO 13938-2:2019.
- Graphical symbols normative reference updated to ISO 7000:2019.
- Amendments: prA1 modifies clauses on normative references, WP test pressure ramp, burst strength sampling, and updates Annex C tables that show how garment variations influence minimum temperature performance.
- Regulatory linkage: Annex ZA maps clauses to essential requirements of Regulation (EU) 2016/425 - compliance with the standard (when cited in the Official Journal) confers a presumption of conformity for relevant PPE requirements.
Applications
- Designed for manufacturers, test laboratories, certification bodies, and safety managers specifying garments used in:
- Refrigerated warehouses and logistics
- Food processing and cold storage operations
- Transport, distribution and outdoor work in cool climates (above −5 °C)
- Useful when selecting or designing garments that must perform under combinations of temperature, humidity and air velocity rather than temperature alone.
Who should use this standard
- PPE manufacturers and product developers validating garment properties
- Accredited testing laboratories performing hydrostatic and bursting tests
- Compliance and certification bodies assessing conformity with EU PPE Regulation (EU) 2016/425
- Occupational safety professionals writing procurement specifications for cool-environment clothing
Related standards (normative references)
- EN ISO 811:2018 (water penetration - hydrostatic pressure)
- EN ISO 13938‑1:2019 and EN ISO 13938‑2:2019 (bursting properties)
- ISO 7000:2019 (graphical symbols)
By aligning garment design and testing with EN 14058:2017/prA1, organizations can ensure measurable, standardized protection for workers in cool environments and facilitate regulatory compliance.
Frequently Asked Questions
SIST EN 14058:2018/kprA1:2022 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Protective clothing - Garments for protection against cool environments". This standard covers: This European Standard specifies requirements and test methods for the performance of garments for protection against the effects of cool environments above −5 °C (see Annex C). These effects comprise not only low air temperatures, but also humidity and air velocity. Cold protective ensembles are excluded from this standard. The protective effects and requirements of footwear, gloves and separate head wear are excluded from the scope of this standard.
This European Standard specifies requirements and test methods for the performance of garments for protection against the effects of cool environments above −5 °C (see Annex C). These effects comprise not only low air temperatures, but also humidity and air velocity. Cold protective ensembles are excluded from this standard. The protective effects and requirements of footwear, gloves and separate head wear are excluded from the scope of this standard.
SIST EN 14058:2018/kprA1:2022 is classified under the following ICS (International Classification for Standards) categories: 13.340.10 - Protective clothing. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 14058:2018/kprA1:2022 has the following relationships with other standards: It is inter standard links to SIST EN 14058:2018+A1:2023, SIST EN 14058:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 14058:2018/kprA1:2022 is associated with the following European legislation: EU Directives/Regulations: 2016/425; Standardization Mandates: M/031, M/571, M/571 AMD 1, M/PPE. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 14058:2018/kprA1:2022 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 14058:2018/oprA1:2021
01-april-2021
Varovalna obleka - Oblačila za zaščito v hladnih okoljih
Protective clothing - Garments for protection against cool environments
Schutzkleidung - Kleidungsstücke zum Schutz gegen kühle Umgebungen
Habillement de protection - Vêtements de protection contre les environnements frais
Ta slovenski standard je istoveten z: EN 14058:2017/prA1
ICS:
13.340.10 Varovalna obleka Protective clothing
SIST EN 14058:2018/oprA1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 14058:2018/oprA1:2021
SIST EN 14058:2018/oprA1:2021
DRAFT
EUROPEAN STANDARD
EN 14058:2017
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
February 2021
ICS 13.340.10
English Version
Protective clothing - Garments for protection against cool
environments
Habillement de protection - Vêtements de protection Schutzkleidung - Kleidungsstücke zum Schutz gegen
contre les environnements frais kühle Umgebungen
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 162.
This draft amendment A1, if approved, will modify the European Standard EN 14058:2017. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14058:2017/prA1:2021 E
worldwide for CEN national Members.
SIST EN 14058:2018/oprA1:2021
EN 14058:2017/prA1:2021 (E)
Contents Page
European foreword . 3
1 Modification to Clause 2, Normative references . 4
2 Modification to 6.5, Resistance to water penetration, WP . 4
3 Modification to 6.8.2, Burst strength of knitted outer shell material . 4
4 Modification to Annex C (informative), Significant changes between this document
and the previous edition . 5
5 Modification to Annex ZA (informative), Relationship between this European
Standard and the essential requirements of EU Directive 89/686/EEC aimed to be
covered. 6
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Regulation (EU) 2016/425 of the European Parliament and of the
Council of 9 March 2016 on personal protective equipment aimed to be covered. 7
6 Modification to Annex ZB, Relationship between this European Standard and the
essential requirements of Regulation (EU) 2016/425 of the European Parliament
and of the Council of 9 March 2016 on personal protective equipment aimed to be
covered. 8
SIST EN 14058:2018/oprA1:2021
EN 14058:2017/prA1:2021 (E)
European foreword
This document (EN 14058:2017/prA1:2021) has been prepared by Technical Committee CEN/TC 162
“Protective clothing including hand and arm protection and lifejackets”, the secretariat of which is held
by DIN.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a standardization request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of
Regulation (EU) 2016/425.
For relationship with Regulation (EU) 2016/425, see informative Annex ZA which is an integral part of
this document.
SIST EN 14058:2018/oprA1:2021
EN 14058:2017/prA1:2021 (E)
1 Modification to Clause 2, Normative references
Replace the normative reference:
EN 20811:1992, Textiles — Determination of resistance to water penetration — Hydrostatic pressure test
with:
EN ISO 811:2018, Textiles — Determination of resistance to water penetration — Hydrostatic pressure
test (ISO 811:2018)
Replace the normative reference:
EN ISO 13938-1:1999, Textiles — Bursting properties of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...