SIST EN 527-2:2017/kFprA1:2019
(Amendment)Office furniture - Work tables - Part 2: Safety, strength and durability requirements
Office furniture - Work tables - Part 2: Safety, strength and durability requirements
This European Standard specifies safety, strength and durability requirements on work tables.
It does not apply to other tables in the office area for which EN standard exists (EN 15372).
Annex A (informative) contains a test for deflection of tables tops.
Büromöbel - Büro-Arbeitstische - Teil 2: Anforderungen an die Sicherheit, Festigkeit und Dauerhaltbarkeit
Mobilier de bureau - Tables de travail de bureau - Partie 2: Exigences de sécurité, de résistance et de durabilité
Pisarniško pohištvo - Delovne mize - 2. del: Zahteve za varnost, trdnost in trajnost - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 527-2:2017/oprA1:2018
01-maj-2018
Pisarniško pohištvo - Delovne mize - 2. del: Zahteve za varnost, trdnost in trajnost
- Dopolnilo A1
Office furniture - Work tables - Part 2: Safety, strength and durability requirements
Büromöbel - Büro-Arbeitstische - Teil 2: Anforderungen an die Sicherheit, Festigkeit und
Dauerhaltbarkeit
Mobilier de bureau - Tables de travail de bureau - Partie 2: Exigences de sécurité, de
résistance et de durabilité
Ta slovenski standard je istoveten z: EN 527-2:2016/prA1
ICS:
97.140 Pohištvo Furniture
SIST EN 527-2:2017/oprA1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 527-2:2017/oprA1:2018
---------------------- Page: 2 ----------------------
SIST EN 527-2:2017/oprA1:2018
DRAFT
EUROPEAN STANDARD
EN 527-2:2016
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
May 2018
ICS 97.140
English Version
Office furniture - Work tables - Part 2: Safety, strength and
durability requirements
Mobilier de bureau - Tables de travail de bureau - Büromöbel - Büro-Arbeitstische - Teil 2:
Partie 2: Exigences de sécurité, de résistance et de Anforderungen an die Sicherheit, Festigkeit und
durabilité Dauerhaltbarkeit
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 207.
This draft amendment A1, if approved, will modify the European Standard EN 527-2:2016. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, I
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.