oSIST prEN 2480:2024

Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa - Bars - De ≤ 75 mm

This document specifies the requirements relating to:
Steel FE-PL2108 (36NiCrMo16)
1 250 MPa ≤ Rm ≤ 1 400 MPa
Bars
De ≤ 75 mm
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa - Stangen - De ≤ 75 mm

No Scope available

Série aérospatiale - Acier FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa - Barres - De ≤ 75 mm

Le présent document spécifie les exigences relatives à :
Acier FE-PL2108 (36NiCrMo16)
1 250 MPa ≤ Rm ≤ 1 400 MPa
Barres
De ≤ 75 mm
pour les applications aérospatiales.

Aeronavtika - Jeklo FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa - Palice - De ≤ 75 mm

General Information

• Status: Not Published
• Public Enquiry End Date: 24-Dec-2024
• ICS: 49.025.10 - Steels
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 08-Oct-2024
• Due Date: 25-Feb-2025
• Completion Date: 30-Dec-2024
• Ref Project: prEN 2480 - Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa - Bars - De ≤ 75 mm

Relations

• Revises: SIST EN 2480:2008 - Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa = Rm = 1 400 MPa - Bars - De = 75 mm
• Effective Date: 09-Jul-2024

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2024
Aeronavtika - Jeklo FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa -
Palice - De ≤ 75 mm
Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa -
Bars - De ≤ 75 mm
Luft- und Raumfahrt - Stahl FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa -
Stangen - De ≤ 75 mm
Série aérospatiale - Acier FE-PL2108 (36NiCrMo16) - 1 250 MPa ≤ Rm ≤ 1 400 MPa -
Barres - De ≤ 75 mm
Ta slovenski standard je istoveten z: prEN 2480
ICS:
49.025.10 Jekla Steels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2024
ICS 49.025.10 Will supersede EN 2480:2008
English Version
Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250
MPa  Rm  1 400 MPa - Bars - De  75 mm
Série aérospatiale - Acier FE-PL2108 (36NiCrMo16) - 1 Luft- und Raumfahrt - Stahl FE-PL2108 (36NiCrMo16)
250 MPa  Rm  1 400 MPa - Barres - De  75 mm - 1 250 MPa  Rm  1 400 MPa - Stangen - De  75 mm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2480:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

European foreword
This document (prEN 2480:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 2480:2008.
— EN 2480:2008 (P1), 03/2008:
o overall editorial improvements to comply with the EN 4500 series
o addition of a bibliography;
o update of Clause 2; EN 4258 and EN 4500-005 were moved to the bibliography;
o addition of a designation and title to the table;
o addition of line 4.
...