SIST EN ISO 2740:2007
(Main)Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2007)
Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2007)
This International Standard is applicable to all sintered metals and alloys, excluding hardmetals. This International Standard specifies: - the die cavity dimensions used for making tensile test pieces by pressing and sintering, and by Metal Injection Moulding (MIM) and sintering; - the dimensions of tensile test pieces machined from sintered and powder forged materials.
Sintermetalle, ausgenommen Hartmetalle - Zugprobestäbe (ISO 2740:2007)
Diese Internationale Norm gilt für alle Sintermetalle und legierungen, ausgenommen Hartmetalle.
Diese Internationale Norm legt
die Maße für die zur Herstellung der Zugprobestäbe durch Pressen und Sintern sowie durch Metall¬Pulverspritzgießen (MIM) und Sintern verwendeten Matrizen fest; ferner
die Maße von Zugprobestäben aus Sinter und Pulverschmiedewerkstoffen.
Matériaux en métal fritté, a l'exclusion des métaux-durs - Éprouvettes pour essai de traction (ISO 2740:2007)
Sintrane kovine brez trdin - Preskušanci za natezni preskus (ISO 2740:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 2740:2007
01-maj-2007
1DGRPHãþD
SIST EN ISO 2740:2000
Sintrane kovine brez trdin - Preskušanci za natezni preskus (ISO 2740:2007)
Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2007)
Sintermetalle, ausgenommen Hartmetalle - Zugprobestäbe (ISO 2740:2007)
Matériaux en métal fritté, a l'exclusion des métaux-durs - Éprouvettes pour essai de
traction (ISO 2740:2007)
Ta slovenski standard je istoveten z: EN ISO 2740:2007
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
77.160 Metalurgija prahov Powder metallurgy
SIST EN ISO 2740:2007 en;fr;de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 2740
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2007
ICS 77.040.10; 77.160 Supersedes EN ISO 2740:1999
English Version
Sintered metal materials, excluding hardmetals - Tensile test
pieces (ISO 2740:2007)
Matériaux en métal fritté, à l'exclusion des métaux-durs - Sintermetalle, ausgenommen Hartmetalle - Zugprobestäbe
Éprouvettes pour essai de traction (ISO 2740:2007) (ISO 2740:2007)
This European Standard was approved by CEN on 28 February 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2740:2007: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 2740:2007 (E)
Foreword
This document (EN ISO 2740:2007) has been prepared by Technical Committee ISO/TC 119
"Powder metallurgy" in collaboration with Technical Committee CEN/SS M11 "Powder metallurgy",
the secretariat of which is held by CMC.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by September 2007, and conflicting national
standards shall be withdrawn at the latest by September 2007.
This document supersedes EN ISO 2740:1999.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.
Endorsement notice
The text of ISO 2740:2007 has been approved by CEN as EN ISO 2740:2007 without any
modifications.
2
---------------------- Page: 3 ----------------------
INTERNATIONAL ISO
STANDARD 2740
Fourth edition
2007-03-01
Sintered metal materials, excluding
hardmetals — Tensile test pieces
Matériaux en métal fritté, à l'exclusion des métaux-durs — Éprouvettes
pour essai de traction
Reference number
ISO 2740:2007(E)
©
ISO 2007
---------------------- Page: 4 ----------------------
ISO 2740:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
---------------------- Page: 5 ----------------------
ISO 2740:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 2740 was prepared by Technical Committee ISO/TC 119, Powder metallurgy, Subcommittee SC 3,
Sampling and testing methods for sintered metal materials (excluding hardmetals).
This fourth edition cancels and replaces the third edition (ISO 2740:1999), of which it constitutes a minor
revision.
© ISO 2007 – All rights reserved iii
---------------------- Page: 6 ----------------------
INTERNATIONAL STANDARD ISO 2740:2007(E)
Sintered metal materials, excluding hardmetals — Tensile test
pieces
1 Scope
This International Standard is applicable to all sintered metals and alloys, excluding hardmetals.
This International Standard specifies:
⎯ the die cavity dimensions used for making tensile test pieces by pressing and sintering, and by Metal
Injection Moulding (MIM) and sintering;
⎯ the dimensions of tensile test pieces machined from sintered and powder forged materials.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 6892:1998, Metallic materials — Tensile testing at ambient temperature
ISO 7500-1:2004, Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/
compression testing machines — Verification and calibrati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.