SIST EN ISO 2740:2009
(Main)Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2009)
Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2009)
This International Standard is applicable to all sintered metals and alloys, excluding hardmetals. This International Standard specifies: - the die cavity dimensions used for making tensile test pieces by pressing and sintering, and by Metal Injection Moulding (MIM) and sintering; - the dimensions of tensile test pieces machined from sintered and powder forged materials.
Sintermetalle, ausgenommen Hartmetalle - Zugprobestäbe (ISO 2740:2009)
Diese Internationale Norm gilt für alle Sintermetalle und -legierungen, ausgenommen Hartmetalle.
Diese Internationale Norm legt
⎯ die Maße für die zur Herstellung der Zugprobestäbe durch Pressen und Sintern sowie durch Metallpulverspritzgießen
(MIM) und Sintern verwendeten Matrizen fest; ferner
⎯ die Maße von Zugprobestäben aus Sinter- und Pulverschmiedewerkstoffen.
Matériaux en métal fritté, à l'exclusion des métaux-durs - Éprouvettes pour essai de traction (ISO 2740:2009)
L'ISO 2740:2009 s'applique à tous les métaux et alliages frittés, à l'exclusion des métaux-durs.
Elle spécifie: 1) les dimensions internes de la matrice utilisées pour la réalisation d'éprouvettes d'essai de traction, par compression et frittage ou par injection-moulage de métal et frittage; 2) les dimensions des éprouvettes de traction usinées dans des matériaux frittés ou frittés-forgés.
Sintrane kovine brez trdin - Preskušanci za natezni preskus (ISO 2740:2009)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 2740:2009
01-julij-2009
1DGRPHãþD
SIST EN ISO 2740:2007
Sintrane kovine brez trdin - Preskušanci za natezni preskus (ISO 2740:2009)
Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2009)
Sintermetalle, ausgenommen Hartmetalle - Zugprobestäbe (ISO 2740:2009)
Matériaux en métal fritté, à l'exclusion des métaux-durs - Éprouvettes pour essai de
traction (ISO 2740:2009)
Ta slovenski standard je istoveten z: EN ISO 2740:2009
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
77.160 Metalurgija prahov Powder metallurgy
SIST EN ISO 2740:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 2740:2009
---------------------- Page: 2 ----------------------
SIST EN ISO 2740:2009
EUROPEAN STANDARD
EN ISO 2740
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2009
ICS 77.040.10; 77.160 Supersedes EN ISO 2740:2007
English Version
Sintered metal materials, excluding hardmetals - Tensile test
pieces (ISO 2740:2009)
Matériaux en métal fritté, à l'exclusion des métaux-durs - Sintermetalle, ausgenommen Hartmetalle - Zugprobestäbe
Éprouvettes pour essai de traction (ISO 2740:2009) (ISO 2740:2009)
This European Standard was approved by CEN on 13 April 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2740:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 2740:2009
EN ISO 2740:2009 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 2740:2009
EN ISO 2740:2009 (E)
Foreword
This document (EN ISO 2740:2009) has been prepared by Technical Committee ISO/TC 119 "Powder
metallurgy" in collaboration with Technical Committee CEN/SS M11 “Powder metallurgy” the secretariat of
which is held by CMC.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2009, and conflicting national standards shall be withdrawn
at the latest by November 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2740:2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 2740:2009 has been approved by CEN as a EN ISO 2740:2009 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 2740:2009
---------------------- Page: 6 ----------------------
SIST EN ISO 2740:2009
INTERNATIONAL ISO
STANDARD 2740
Fifth edition
2009-05-15
Sintered metal materials, excluding
hardmetals — Tensile test pieces
Matériaux en métal fritté, à l'exclusion des métaux-durs — Éprouvettes
pour essai de traction
Reference number
ISO 2740:2009(E)
©
ISO 2009
---------------------- Page: 7 ----------------------
SIST EN ISO 2740:2009
ISO 2740:2009(E)
PDF disclaimer
This PDF file may contain embedded typ
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sintrane kovine brez trdin - Preskušanci za natezni preskus (ISO/FDIS 2740:2008)Sintermetalle, ausgenommen Hartmetalle - Zugprobestäbe (ISO/FDIS 2740:2008)Matériaux en métal fritté, à l'exclusion des métaux-durs - Éprouvettes pour essai de traction (ISO/FDIS 2740:2008)Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO/FDIS 2740:2008)77.160Metalurgija prahovPowder metallurgy77.040.10Mehansko preskušanje kovinMechanical testing of metalsICS:Ta slovenski standard je istoveten z:prEN ISO 2740kSIST prEN ISO 2740:2009en,fr,de01-februar-2009kSIST prEN ISO 2740:2009SLOVENSKI
STANDARD
kSIST prEN ISO 2740:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMFINAL DRAFTprEN ISO 2740December 2008ICS 77.040.10; 77.160Will supersede EN ISO 2740:2007
English VersionSintered metal materials, excluding hardmetals - Tensile testpieces (ISO/FDIS 2740:2008)Matériaux en métal fritté, à l'exclusion des métaux-durs -Éprouvettes pour essai de traction (ISO/FDIS 2740:2008)Sintermetalle, ausgenommen Hartmetalle - Zugprobestäbe(ISO/FDIS 2740:2008)This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the TechnicalCommittee CEN/SS M11.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations whichstipulate the conditions for giving this European Standard the status of a national standard without any alteration.This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other languagemade by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice andshall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. prEN ISO 2740:2008: EkSIST prEN ISO 2740:2009
prEN ISO 2740:2008 (E) 2 Contents Page Foreword .3 kSIST prEN ISO 2740:2009
prEN ISO 2740:2008 (E) 3 Foreword This document (prEN ISO 2740:2008) has been prepared by Technical Committee ISO/TC 119 "Powder metallurgy" in collaboration with Technical Committee CEN/SS M11 “Powder metallurgy” the secretariat of which is held by CMC. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN ISO 2740:2007. Endorsement notice The text of ISO/FDIS 2740:2008 has been approved by CEN as a prEN ISO 2740:2008 without any modification.
kSIST prEN ISO 2740:2009
kSIST prEN ISO 2740:2009
Please see the administrative notes on page iii
RECIPIENTS OF THIS DRAFT ARE INVITED TOSUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICHTHEY ARE AWARE AND TO PROVIDE SUPPORT-ING DOCUMENTATION. IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-LOGICAL, COMMERCIAL AND USER PURPOSES,DRAFT INTERNATIONAL STANDARDS MAY ONOCCASION HAVE TO BE CONSIDERED IN THELIGHT OF THEIR POTENTIAL TO BECOME STAN-DARDS TO WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
Reference numberISO/FDIS 2740:2008(E)© ISO 2008 FINAL DRAFT ISO/TC 119/SC 3 Secretariat: DIN Voting begins on: 2008-12-11 Voting terminates on: 2009-02-11
INTERNATIONAL STANDARD ISO/FDIS2740Sintered metal materials, excluding hardmetals — Tensile test pieces Matériaux en métal fritté, à l'exclusion des métaux-durs — Éprouvettes pour essai de traction
kSIST prEN ISO 2740:2009
ISO/FDIS 2740:2008(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.