SIST EN 4604-001:2009
(Main)Aerospace series - Cable, electrical, for signal transmission - Part 001: Technical specification
Aerospace series - Cable, electrical, for signal transmission - Part 001: Technical specification
This standard specifies the required characteristics, test methods, qualification and acceptance conditions of signal transmission electrical cables.
Luft- und Raumfahrt - Elektrische Leitungen für Signalübertragungen - Teil 001: Technische Lieferbedingungen
Diese Norm legt die Anforderungen, Prüfverfahren, Qualifikations und Abnahmebedingungen für elektrische Leitungen für Signalübertragungen fest.
Série aérospatiale - Câbles électriques pour transmission de signaux - Partie 001 : Spécification technique
Aeronavtika - Kabli, električni, za prenos signala - 001. del: Tehnična specifikacija
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Leitungen für Signalübertragungen - Teil 001: Technische LieferbedingungenSérie aérospatiale - Câbles électriques pour transmission de signaux - Partie 001 : Spécification techniqueAerospace series - Cable, electrical, for signal transmission - Part 001: Technical specification49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4604-001:2006SIST EN 4604-001:2009en,de01-marec-2009SIST EN 4604-001:2009SLOVENSKI
STANDARD
SIST EN 4604-001:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4604-001July 2006ICS 49.060 English VersionAerospace series - Cable, electrical, for signal transmission -Part 001: Technical specificationSérie aérospatiale - Câbles électriques pour transmissionde signaux - Partie 001 : Spécification techniqueLuft- und Raumfahrt - Elektrische Leitungen fürSignalübertragungen - Teil 001: TechnischeLieferbedingungenThis European Standard was approved by CEN on 28 April 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4604-001:2006: ESIST EN 4604-001:2009
EN 4604-001:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Materials and construction of cables.4 5 Required characteristics.5 6 Test methods.5 7 Quality assurance.8 8 Identification, marking and colour.9 9 Packaging, labelling and delivery length.10
SIST EN 4604-001:2009
EN 4604-001:2006 (E) 3 Foreword This European Standard (EN 4604-001:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 4604-001:2009
EN 4604-001:2006 (E) 4 1 Scope This standard specifies the required characteristics, test methods, qualification and acceptance conditions of signal transmission electrical cables. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2574, Aircraft — Electrical cables — Identification marking. EN 3475-100*, Aerospace series — Cables, electrical, aircraft use — Test methods — Part 100: General. EN 3838, Aerospace series — Requirements and tests on user-applied markings on aircraft electrical cables. 1) EN 9133, Aerospace series — Quality management systems — Qualification Procedure for aerospace standard parts. TR 6058, Aerospace series — Cable code and identification list. 2) 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 3475-100 apply. 4 Materials and construction of cables 4.1 General The composition, dimensions and mass of the cable shall conform to the characteristics below, as well as the values specified in the product standards. 4.2 Conductor 4.2.1 Material See product standards. 4.2.2 Construction See product standards, conductor shall not be spliced.
* And all parts quoted in Table 1. 1) Published as ASD Prestandard at the date of publication of this standard. 2) Published as ASD Technical Report at the date of publication of this standard. SIST EN 4604-001:2009
EN 4604-001:2006 (E) 5 4.3 Dielectric See EN product standards. 4.4 Screening 4.4.1 Material The materials used for screening are defined in the product standards. The screen strands or strips shall be free of kinks or cracks and their surface shall have no corrosion at all or any other impurities. 4.4.2 Construction Construction shall be in accordance with the product standard. Splices of the individual strands or strips may be effected by brazing, soldering or folding in. The
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.