Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 009: Protective cover for receptacle - Product standard

This European Standard defines the characteristics of protective covers for receptacles in the family of
bayonet coupling circular connectors, intended for use in an operating temperature range of – 65 °C to 175 °C
or 200 °C continuous.
It applies to models defined in Table 2.
For receptacles associated with these protective covers, see EN 3646-003 to EN 3646-007.

Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Bajonettkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 009: Schutzkappe für festen Steckverbinder - Produktnorm

Série aérospatiale - Connecteurs électriques circulaires à accouplement par baïonnettes, température d'utilisation 175 °C ou 200 °C continu - Partie 009 : Bouchon de vol pour embase - Norme de produit

Aeronavtika - Konektorji, električni, okrogli, bajonetno sklapljanje, stalna delovna temperatura 175 °C ali 200 °C - 009. del: Zaščitna kapa - Standard za proizvod

Ta evropski standard določa lastnosti zaščitne kape za podlage v družini okroglih bajonetno sklopljenih konektorjev, namenjenih uporabi pri delovni temperaturi med − 65 °C to 175 °C ali pri stalni delovni temperaturi 200 °C. Uporablja se za modele iz preglednice 2. Za podlage, povezane s temi zaščitnimi kapami, glejte EN 3646-003 do EN 3646-007.

General Information

Status
Published
Publication Date
09-Jul-2015
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
22-Jun-2015
Due Date
27-Aug-2015
Completion Date
10-Jul-2015

Relations

Buy Standard

Standard
EN 3646-009:2015
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Bajonettkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 009: Schutzkappe für festen Steckverbinder - ProduktnormSérie aérospatiale - Connecteurs électriques circulaires à accouplement par baïonnettes, température d'utilisation 175 °C ou 200 °C continu - Partie 009 : Bouchon de vol pour embase - Norme de produitAerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 009: Protective cover for receptacle - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3646-009:2015SIST EN 3646-009:2015en,fr,de01-september-2015SIST EN 3646-009:2015SLOVENSKI
STANDARDSIST EN 3646-009:20091DGRPHãþD



SIST EN 3646-009:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3646-009
May 2015 ICS 49.060 Supersedes EN 3646-009:2006English Version
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 009: Protective cover for receptacle - Product standard
Série aérospatiale - Connecteurs électriques circulaires à accouplement par baïonnettes, températures d'utilisation 175 °C ou 200 °C - Partie 009: Bouchon de vol pour embase - Norme de produit
Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Bajonettkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 009: Schutzkappe für festen Steckverbinder -Produktnorm This European Standard was approved by CEN on 10 January 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3646-009:2015 ESIST EN 3646-009:2015



EN 3646-009:2015 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Required characteristics .4 5 Designation .6 6 Marking .7 7 Technical specification .7 SIST EN 3646-009:2015



EN 3646-009:2015 (E) 3 Foreword This document (EN 3646-009:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2015, and conflicting national standards shall be withdrawn at the latest by November 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 3646-009:2006. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republ
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.