Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 004: Receptacle, jam-nut mounting - Product standard

This Standard defines the characteristics of the jam-nut mounted receptacles of the family of bayonet
coupling circular connectors, intended for use in an operating temperature range of –65 °C to 175 °C or
200 °C continuous.
It applies to models defined in Table 4.
For contact, filler plugs and rear accessories associated with this receptacle see EN 3646-002. For plugs
and protective covers see EN 3646-008 and EN 3646-009 respectively.

Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Bajonettkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 004: Fester Steckverbinder mit Mutternbefestigung - Produktnorm

Série aérospatiale - Connecteurs électriques circulaires à accouplement par baïonenettes, température d'utilisation 175 °C ou 200 °C continu - Partie 004: Embasse à fixation par écrou - Norme de produit

La présente Norme définit les caractéristiques des embases à fixation par écrou de la famille des connecteurs circulaires à accouplement par baïonnettes destinées à être utilisés dans une plage de températures comprises entre - 65 °C et 175 °C ou 200 °C continu.
Elle s'applique aux modèles définis dans le Tableau 4.
Pour les contacts, les obturateurs d'étanchéité et les accessoires arrière associés à ces embases, voir l’EN 3646-002. Pour les fiches et les bouchons de vol, voir respectivement les EN 3646-008 et EN 3646-009.

Aeronavtika - Konektorji, električni, okrogli, bajonetno sklapljanje, stalna delovna temperatura 175 °C ali 200 °C - 004. del: Podloga, pritrjena z matico - Standard za proizvod

Ta standard določa lastnosti podloge, pritrjene z matico, v družini okroglih bajonetno sklopljenih konektorjev, namenjenih uporabi pri obratovalni temperaturi od −65 °C do 175 °C ali stalni obratovalni temperaturi 200 °C.
Uporablja se za modele iz preglednice 4.
Za dodatke kontaktov, slepih čepov in izhodov, povezane s to podlogo, glejte standard EN 3646-002. Za čepe
in zaščitne kape glejte standarda EN 3646-008 in EN 3646-009.

General Information

Status
Published
Publication Date
25-Jan-2016
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
20-Jan-2016
Due Date
26-Mar-2016
Completion Date
26-Jan-2016

Relations

Buy Standard

Standard
EN 3646-004:2016
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3646-004:2016
01-marec-2016
1DGRPHãþD
SIST EN 3646-004:2014
$HURQDYWLND.RQHNWRUMLHOHNWULþQLRNURJOLEDMRQHWQRVNODSOMDQMHVWDOQDGHORYQD
WHPSHUDWXUDƒ&DOLƒ&GHO3RGORJDSULWUMHQD]PDWLFR6WDQGDUG]D
SURL]YRG
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating
temperature 175 °C or 200 °C continuous - Part 004: Receptacle, jam-nut mounting -
Product standard
Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Bajonettkupplung,
Betriebstemperatur 175 °C oder 200 °C konstant - Teil 004: Fester Steckverbinder mit
Mutternbefestigung - Produktnorm
Série aérospatiale - Connecteurs électriques circulaires à accouplement par
baïonenettes, température d'utilisation 175 °C ou 200 °C continu - Partie 004: Embasse
à fixation par écrou - Norme de produit
Ta slovenski standard je istoveten z: EN 3646-004:2015
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 3646-004:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3646-004:2016

---------------------- Page: 2 ----------------------

SIST EN 3646-004:2016


EN 3646-004
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2015
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3646-004:2013
English Version

Aerospace series - Connectors, electrical, circular, bayonet
coupling, operating temperature 175 °C or 200 °C
continuous - Part 004: Receptacle, jam-nut mounting -
Product standard
Série aérospatiale - Connecteurs électriques circulaires Luft- und Raumfahrt - Elektrische Rundsteckverbinder
à accouplement par baïonnettes, température mit Bajonettkupplung, Betriebstemperatur 175 °C oder
d'utilisation 175 °C ou 200 °C continu - Partie 004: 200 °C konstant - Teil 004: Fester Steckverbinder mit
Embasse à fixation par écrou - Norme de produit Mutternbefestigung - Produktnorm
This European Standard was approved by CEN on 8 June 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3646-004:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3646-004:2016
EN 3646-004:2015 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
5 Designation. 8
6 Marking . 9
7 Technical specification . 9

2

---------------------- Page: 4 ----------------------

SIST EN 3646-004:2016
EN 3646-004:2015 (E)
European foreword
This document (EN 3646-004:2015) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be
withdrawn at the latest by May 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 3646-004:2013.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

3

---------------------- Page: 5 ----------------------

SIST EN 3646-004:2016
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.