iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12154:2001

(Main)

Curtain walling - Watertightness - Performance requirements and classification

Curtain walling - Watertightness - Performance requirements and classification

This standard defines the requirements and classification of watertightness performance of both fixed and openable parts of curtain walling under postive static air pressure. NOTE: This standard applies to curtain walling in accordance with WI 00033238.

Vorhangfassaden - Schlagregendichtheit - Leistungsanforderungen und Klassifizierung

In dieser Norm werden Anforderungen und Klassifizierung der Leistung im Bezug auf die Schlagregendichtheit der feststehenden und öffenbaren Teile von Vorhangfassaden festgelegt, die unter positiven statischen Luftdruck stehen. ANMERKUNG: Diese Norm gilt für alle Vorhangfassaden nach WI 00033238.

Façades rideaux - Etanchéité a l'eau - Exigences de performance et classification

La présente norme définit les exigences et la classification de performances d'étanchéité a l'eau tant des parties fixes que mobiles d'une façade rideau sous pression d'air statique positive. NOTE: La présente norme s'applique aux façades rideau conformément au WI 00033238.

Obešene fasade - Neprepustnost za vodo - Zahteve in klasifikacija

General Information

Status
Published
Publication Date
31-Aug-2001
ICS
91.060.10 - Walls. Partitions. Facades
Technical Committee
ISTP - Doors and windows
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2001
Due Date
01-Sep-2001
Completion Date
01-Sep-2001
Directive
89/106/EEC - Construction products
Ref Project
EN 12154:1999 - Curtain walling - Watertightness - Performance requirements and classification

Buy Standard

EN 12154:2001EN 12154:2001
PreviousNext
Standard
EN 12154:2001
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Obešene fasade - Neprepustnost za vodo - Zahteve in klasifikacijaVorhangfassaden - Schlagregendichtheit - Leistungsanforderungen und KlassifizierungFaçades rideaux - Etanchéité a l'eau - Exigences de performance et classificationCurtain walling - Watertightness - Performance require
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12152:2023(Main)
Curtain walling - Air permeability - Performance requirements and classification
EN 12152:2023

This document specifies requirements and classification of air permeability of both fixed and openable parts of curtain walling, under positive and negative static air pressure.
NOTE   This document applies to curtain walling as specified in EN 13830.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14024:2023(Main)
Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
EN 14024:2023

This document specifies requirements for assessment of the mechanical strength of metal profiles incorporating a thermal barrier having mechanical performance depending on their intended use.
It also specifies the tests to determine the characteristic values of mechanical properties of the thermal barrier profile and to assess the effect of different conditionings of the thermal barrier on the mechanical performance of the connection.
Thermal barriers which do not give a contribution to the mechanical resistance of the profiles are excluded from this document.
This document applies to thermal barrier profiles designed mainly for windows, doors, screens and curtain walls. It does not apply to thermal barriers made only of metal profiles connected with metal pins or screws.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13830:2015+A1:2020/AC:2022(Corrigendum)
Curtain walling - Product standard
EN 13830:2015+A1:2020/AC:2022

This European Standard specifies requirements of curtain walling kit intended to be used as a building envelope to provide weather resistance, safety in use and energy economy and heat retention and provides test/assessments/calculation methods and compliance criteria of the related performances.
The curtain walling kit covered by this standard should fulfil its own integrity and mechanical stability but does not contribute to the load bearing or stability of the main building structure, and could be replaced independently of it.
This standard applies to curtain walling kit ranging from a vertical position to ± 15° from the vertical. Any sloping parts should be contained within the curtain walling kit.
This standard is applicable to the whole of the curtain walling kits, including the fixings.
Curtain walling according to this standard is intended to be used as part of the building envelope.
This European Standard does not include:
—   “Patent glazing” (glazed sloping roofs) kits;
—   Roof glazing constructions;
—   Façades made of precast concrete panels as part of the wall (see EN 14992).
NOTE 1   Precast concrete panels may be used in curtain walling kits as infill panels.
NOTE 2   Durability of structural sealed glazing infills is not covered by this standard.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16758:2021(Main)
Curtain walling - Determination of the strength of shear connections - Test method and requirements
EN 16758:2021

This document specifies test methods for the determination of bearing capacity (ultimate limit state and serviceability limit state), of connections between curtain walling framing members for which it cannot be calculated in accordance with current codes or conventional calculations based upon the strength of the materials.
Mechanical performances of the curtain walling connections are already assessed in accordance with the provisions described in EN 13830. Additional information with respect to mechanical performance of the connections and direct applications can be determined with this document.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13830:2015+A1:2020(Main)
Curtain walling - Product standard
EN 13830:2015+A1:2020

This European Standard specifies requirements of curtain walling kit intended to be used as a building envelope to provide weather resistance, safety in use and energy economy and heat retention and provides test/assessments/calculation methods and compliance criteria of the related performances.
The curtain walling kit covered by this standard should fulfil its own integrity and mechanical stability but does not contribute to the load bearing or stability of the main building structure, and could be replaced independently of it.
This standard applies to curtain walling kit ranging from a vertical position to ± 15° from the vertical. Any sloping parts should be contained within the curtain walling kit.
This standard is applicable to the whole of the curtain walling kits, including the fixings.
Curtain walling according to this standard is intended to be used as part of the building envelope.
This European Standard does not include:
—   “Patent glazing” (glazed sloping roofs) kits;
—   Roof glazing constructions;
—   Façades made of precast concrete panels as part of the wall (see EN 14992).
NOTE 1   Precast concrete panels may be used in curtain walling kits as infill panels.
NOTE 2   Durability of structural sealed glazing infills is not covered by this standard.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17146:2019(Main)
Determination of the strength of infill supports - Test method and requirements
EN 17146:2018

This European Standard specifies test methods for the determination of bearing capacity (ultimate limit state and serviceability limit state) of infill support which cannot be calculated in accordance with current codes or conventional calculations based upon the strength of the materials.
Mechanical performances of the infill support are already assessed while testing the glazed product or infill in regards to safety in use. Additional information with respect to mechanical performance of the infill support and direct applications can be determined with this standard.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14019:2016(Main)
Curtain Walling - Impact resistance - Performance requirements
EN 14019:2016

This standard defines performance requirements of curtain walling (excluding ‘glass in building’ which is classified under EN 12600) under soft body impact load criteria specified herein and tested in accordance with EN 13049.
Its criteria is targeted to safety in use and integrity of curtain wall in the event of sudden impact forces on the curtain wall surfaces. Compliance with the performance requirement is determined by the laboratory test.
It applies to those areas of curtain walling which face onto areas of human activity, either internally or externally and takes account of accidental impacts brought on by people going about their normal daily activities and impacts brought about by equipment and similar devices for maintenance, cleaning, repair and similar occasional activities.
It does not set out to define performance requirements of impact under exceptional circumstances such as acts of vandalism, vehicular collision, firearm projectiles, etc..
This standard will have no bearing whatsoever on any National Building / Health and Safety regulations which may exist and whose requirements shall apply separately and in parallel with these test performance requirements.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13119:2016(Main)
Curtain walling - Terminology
EN 13119:2016

This European Standard de¬scribes terminology used in documents, drawings, specifications etc., when referring to the detailed elements of curtain wall¬ing and provides a comprehensive, though not total, list of regu¬lar terms.
It does not set out to repeat those physical definitions properly included within individual curtain walling standards related to performance requirements and associated test methods.

  • Standard
    25 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13050:2011(Main)
Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
EN 13050:2011

This European Standard defines an additional test method which may be used when assessing the watertightness of curtain walling, both its fixed and openable parts. It is a supplementary test, not required for classification purposes, and it should be used only when the project specifier has determined its necessity.
It describes how the outside face of a curtain walling specimen should be subjected to a continuous spray of water and a turbulent airflow, with continuous pulses of positive air pressure on the outside of the test specimen generated from within the chamber.
This standard applies to any curtain walling product as defined in EN 13830.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13116:2002(Main)
Curtain walling - Resistance to wind load - Performance requirements
EN 13116:2001

This standard specifies the structural performance requirements of curtain walling under wind load, both its fixed and openable parts, under postive and negative static air pressure.
This standard applies to any curtain walling product as defined in prEN 13830.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day