Fibre optic interconnecting devices and passive components - Performance standard - Part 111-9: Sealed closures for category S - Subterranean (IEC 61753-111-9:2009)

This part of IEC 61753 contains the minimum test and measurement requirements and severities which a sealed fibre optic closure must satisfy in order to be categorised as meeting the IEC standard for category S - subterranean, as defined in Annex A of IEC 61753-1. Free breathing closures are not covered in this standard.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 111-9: Druckdichte Muffen für die Kategorie S - unterirdische Verlegung (IEC 61753-111-9:2009)

Dispositifs d'interconnexion et composants passifs à fibres optiques norme de qualité de fonctionnement - Partie 111-9: Boîtiers scellés pour catégorie S - Souterrain (CEI 61753-111-9:2009)

La CEI 61753-111-9:2009 contient les sévérités et les exigences minimales d'essai et de mesure auxquelles un boîtier à fibres optiques scellé doit satisfaire afin d'être classé comme conforme aux exigences de la norme CEI pour la catégorie S - souterrain, telle qu'elle est définie à l'Annexe A de la CEI 61753-1. Les boîtiers à ventilation libre ne sont pas couverts par la présente norme.

Optični spojni elementi in pasivne komponente - Izvedbeni standard - 111-9. del: Zatesnjene spojnice za kategorijo S (Subterranean) - Podzemna uporaba (IEC 61753-111-9:2009)

Ta del IEC 61753 vsebuje minimalne zahteve za preskus in merjenje ter natančnost, ki jih mora izpolnjevati zatesnjena optična spojnica, da zadošča standardu IEC za kategorijo S (Subterranean) – Podzemna uporaba, kot je opredeljeno v Dodatku A IEC 61753-1. Ta standard ne zajema spojnic z zračenjem.

General Information

Status
Published
Publication Date
07-Mar-2010
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
24-Feb-2010
Due Date
01-May-2010
Completion Date
08-Mar-2010

Relations

Buy Standard

Standard
EN 61753-111-9:2010
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61753-111-9:2010
01-april-2010
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH,]YHGEHQLVWDQGDUGGHO
=DWHVQMHQHVSRMQLFH]DNDWHJRULMR6 6XEWHUUDQHDQ 3RG]HPQDXSRUDED ,(&

Fibre optic interconnecting devices and passive components - Performance standard -
Part 111-9: Sealed closures for category S - Subterranean (IEC 61753-111-9:2009)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
111-9: Druckdichte Muffen für die Kategorie S - unterirdische Verlegung (IEC 61753-111-
9:2009)
Dispositifs d'interconnexion et composants passifs à fibres optiques norme de qualité de
fonctionnement - Partie 111-9: Boîtiers scellés pour catégorie S - Souterrain (CEI 61753-
111-9:2009)
Ta slovenski standard je istoveten z: EN 61753-111-9:2010
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61753-111-9:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61753-111-9:2010

---------------------- Page: 2 ----------------------

SIST EN 61753-111-9:2010

EUROPEAN STANDARD
EN 61753-111-9

NORME EUROPÉENNE
February 2010
EUROPÄISCHE NORM

ICS 33.180.20


English version


Fibre optic interconnecting devices and passive components
performance standard -
Part 111-9: Sealed closures for category S -
Subterranean
(IEC 61753-111-9:2009)


Dispositifs d'interconnexion et composants Lichtwellenleiter - Verbindungselemente
passifs à fibres optiques norme und passive Bauteile -
de qualité de fonctionnement - Betriebsverhalten -
Partie 111-9: Boîtiers scellés Teil 111-9: Druckdichte Muffen
pour catégorie S - Souterrain für die Kategorie S -
(CEI 61753-111-9:2009) unterirdische Verlegung
(IEC 61753-111-9:2009)




This European Standard was approved by CENELEC on 2010-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-111-9:2010 E

---------------------- Page: 3 ----------------------

SIST EN 61753-111-9:2010
EN 61753-111-9:2010 - 2 -
Foreword
The text of document 86B/2906/FDIS, future edition 1 of IEC 61753-111-9, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-111-9 on 2010-02-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2010-11-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-02-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61753-111-9:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-1 NOTE  Harmonized as EN 60068-1.
IEC 60068-2 NOTE  Harmonized in EN 60068-2 series (not modified).
IEC 60721-3-1 NOTE  Harmonized as EN 60721-3-1.
IEC 60793-2 NOTE  Harmonized as EN 60793-2.
IEC 60794-1-2 NOTE  Harmonized as EN 60794-1-2.
IEC 60794-2 NOTE  Harmonized as EN 60
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.