SIST EN 12697-8:2004
(Main)Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens
Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens
This standard describes a procedure for calculating the percentage of air voids in a compacted bituminous specimen. The air voids content can be used as a mix- design criterion or as a parameter for evaluating the mixture after placing and compaction in the road.
Asphalt - Prüfverfahren für Heißasphalt - Teil 8: Bestimmung von volumetrischen Charakteristiken von Asphalt-Probekörpern
Diese Europäische Norm legt ein Verfahren fest, mit dem prozentuale Anteil von Luftporen in einem verdichteten Asphaltprobekörper berechnet werden kann Die so errechneten werden als Kriterium bei einer Eignungsprüfung oder bei der Beurteilung der Mischung nach dem Einbau und der Verdichtung in der Straße verwendet.
Mélanges bitumineux - Méthodes d'essai pour enrobés a chaud - Partie 8: Détermination des pourcentages de vides caractéristiques des éprouvettes bitumineuses
La présente Norme européenne décrit la procédure permettant de calculer deux caractéristiques volumétriques d'une éprouvette bitumineuse compactée : le pourcentage de vides (Vm) et le pourcentage de vides du squelette granulaire comblés par le liant (VFB).
Cette méthode peut etre utilisée pour les éprouvettes compactées en laboratoire ou les carottes prélevées dans la chaussée apres répandage et compactage.
Ces caractéristiques volumétriques peuvent etre employées comme criteres de formulation ou comme parametres d'évaluation du mélange apres son répandage et son compactage dans la chaussée.
Bitumenske zmesi – Preskusne metode za vroče asfaltne zmesi – 8. del: Ugotavljanje značilnosti votlin v bitumenskih preskušancih
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.GHOAsphalt - Prüfverfahren für Heißasphalt - Teil 8: Bestimmung von volumetrischen Charakteristiken von Asphalt-ProbekörpernMélanges bitumineux - Méthodes d'essai pour enrobés a chaud - Partie 8: Détermination des pourcentages de vides caractéristiques des éprouvettes bitumineusesBituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12697-8:2003SIST EN 12697-8:2004en01-junij-2004SIST EN 12697-8:2004SLOVENSKI
STANDARD
SIST EN 12697-8:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12697-8March 2003ICS 93.080.20English versionBituminous mixtures - Test methods for hot mix asphalt - Part 8:Determination of void characteristics of bituminous specimensMélanges bitumineux - Méthodes d'essai pour enrobés àchaud - Partie 8: Détermination de la teneur en vides deséprouvettes bitumineusesAsphalt - Prüfverfahren für Heißasphalt - Teil 8:Bestimmung von volumetrischen Charakteristiken vonAsphalt-ProbekörpernThis European Standard was approved by CEN on 21 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12697-8:2003 ESIST EN 12697-8:2004
EN 12697-8:2003 (E)2ContentspageForeword.31Scope.52Normative references.53Terms and definitions.54Determination of the air voids content (Vm).65Determination of the percentage of the voids in the mineral aggregate filled with binder (VFB).7Bibliography.9SIST EN 12697-8:2004
EN 12697-8:2003 (E)3ForewordThis document (EN 12697-8:2003) has been prepared by Technical Committee CEN/TC 227 "Road materials", thesecretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by September 2003, and conflicting national standards shall be withdrawn at thelatest by August 2005.This European Standard is one of a series of standards as listed below.EN 12697-1, Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder contentEN 12697-2, Bituminous mixtures - Test methods for hot mix asphalt - Part 2: Determination of particle sizedistributionEN 12697-3, Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Binder recovery: Rotary evaporatorEN 12697-4, Bituminous mixtures - Test methods for hot mix asphalt - Part 4: Binder recovery: FractionatingcolumnEN 12697-5, Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximumdensityEN 12697-6, Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density ofbituminous specimen by hydro-static methodEN 12697-7, Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density ofbituminous specimens by gamma raysEN 12697-8, Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristicsof bituminous mixturesEN 12697-9, Bituminous mixtures - Test methods for hot mix asphalt - Part 9: Determination of the referencedensityEN 12697-10, Bituminous mixtures - Test methods for hot mix asphalt - Part 10: CompactibilityprEN 12697-11, Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of thecompatability
between aggregate and binderprEN 12697-12, Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the watersensitivity of bituminous specimensEN 12697-13, Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurementEN 12697-14, Bituminous mixtures - Test methods for hot mix asphalt - Part 14: Water contentEN 12697-15, Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregationsensitivityprEN 12697-16, Bituminous mixtures - Test methods for hot mix asphalt - Part 16: Abrasion by studded tyresprEN 12697-17, Bituminous mixtures - Test methods for hot mix asphalt - Part 17: Partial loss of porous asphaltspecimenprEN 12697-18, Bituminous mixtures - Test methods for hot mix asphalt - Part 18: Binder drainage from porousasphaltSIST EN 12697-8:2004
EN 12697-8:2003 (E)4prEN 12697-19, Bituminous mixtures - Test methods for hot mix asphalt - Part 19: Permeability of specimenprEN 12697-20, Bituminous mixtures - Test methods for hot mix asphalt - Part 20: Indentation using cube ormarshall specimenprEN 12697-21, Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using platespecimensprEN 12697-22, Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel trackingprEN 12697-23, Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirecttensile strength of bituminous specimensprEN 12697-24, Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigueprEN 12697-25, Bituminous mixtures - Test methods for hot mix asphalt - Part 25: Cyclic compression testprEN 12697-26, Bituminous mixtures - Test methods for hot mix asphalt - Part 26: StiffnessEN 12697-27, Bituminous mixtures - Test methods for hot mix asphalt - Part 27: SamplingEN 12697-28, Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples fordetermining binder content, water content and gradingEN 12697-29, Bituminous mixtures - Test methods for hot mix asphalt - Part 29: Determination of the dimensionsof bituminous specimenprEN 12697-30, Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Preparation of specimen byimpact compactorprEN 12697-31, Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation, gyratorycompactorEN 12697-32, Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction ofbituminous mixtures by a vibratory compactorprEN 12697-33, Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Speci
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.