SIST EN 61300-2-47:2011
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks (IEC 61300-2-47:2010)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks (IEC 61300-2-47:2010)
This part of IEC 61300 details a procedure for determining the suitability of a fibre optic device to withstand the effects of thermal shock. In practice this means a very short change over time between extreme temperatures.
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-47: Prüfungen - Temperaturschock (IEC 61300-2-47:2010)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-47: Essais - Chocs thermiques (IEC 61300-2-47:2010)
La CEI 61300-2-47:2010 détaille une méthode pour déterminer l'aptitude d'un dispositif à fibres optiques à résister aux effets des chocs thermiques. En pratique, cela correspond à un temps de passage très court entre des températures extrêmes. Parmi les modifications significatives, la sévérité d'essai a été revue.
Optični spojni elementi in pasivne komponente - Osnovni preskuševalni in merilni postopki - 2-47. del: Preskušanje - Toplotni udar (IEC 61300-2-47:2010)
Ta del IEC 61300 podrobno opisuje postopek ugotavljanja primernosti optičnega elementa, da kljubuje učinkom toplotnega udara. V praksi to pomeni zelo kratko časovno spremembo med skrajnimi temperaturami.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61300-2-47:2011
01-januar-2011
1DGRPHãþD
SIST EN 61300-2-47:2007
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSUHVNXãHYDOQLLQPHULOQL
SRVWRSNLGHO 3UHVNXãDQMH7RSORWQLXGDU ,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-47: Tests - Thermal shocks (IEC 61300-2-47:2010)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-47: Prüfungen - Temperaturschock (IEC 61300-2-47:2010)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-47: Essais - Chocs thermiques (IEC
61300-2-47:2010)
Ta slovenski standard je istoveten z: EN 61300-2-47:2010
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-47:2011 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61300-2-47:2011
---------------------- Page: 2 ----------------------
SIST EN 61300-2-47:2011
EUROPEAN STANDARD
EN 61300-2-47
NORME EUROPÉENNE
November 2010
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 61300-2-47:2007
English version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-47: Tests -
Thermal shocks
(IEC 61300-2-47:2010)
Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Méthodes fondamentales d'essais et de Bauteile -
mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-47: Essais - Teil 2-47: Prüfungen -
Chocs thermiques Temperaturschock
(CEI 61300-2-47:2010) (IEC 61300-2-47:2010)
This European Standard was approved by CENELEC on 2010-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-47:2010 E
---------------------- Page: 3 ----------------------
SIST EN 61300-2-47:2011
EN 61300-2-47:2010 - 2 -
Foreword
The text of document 86B/3069/FDIS, future edition 3 of IEC 61300-2-47, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-47 on 2010-11-01.
This European Standard supersedes EN 61300-2-47:2007.
It constitutes a technical revision. The significant changes include the review of the test severity.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-47:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61753-1 NOTE Harmonized as EN 61753-1.
__________
---------------------- Page: 4 ----------------------
SIST EN 61300-2-47:2011
- 3 - EN 61300-2-47:2010
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60068-2-14 - Environmental testing - EN 60068-2-14 -
Part 2-14: Tests - Test N: Change of
temperature
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 -
passive components - Basic test and
measurement procedures -
Part 3-1: Examinations and measurements -
Visual examination
---------------------- Page: 5 ----------------------
SIST EN 61300-2-47:2011
---------------------- Page: 6 ----------------------
SIST EN 61300-2-47:2011
IEC 61300-2-47
®
Edition 3.0 2010-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components –
Basic test and measurement procedures –
Part 2-47: Tests – Thermal shocks
Dispositifs d'interconnexion et composants passifs à fibres optiques –
Méthodes fondamentales d'essais et de mesures –
Partie 2-47: Essais – Chocs thermiques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
K
CODE PRIX
ICS 33.180.20 ISBN 978-2-88912-213-4
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 61300-2-47:2011
– 2 – 61300-2-47 © IEC:2010
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references .5
3 General description .5
4 Apparatus.5
4.1 Testing chambers.5
4.2 Support for mounting the test specimens.6
5 Procedure .6
5.1 General .6
5.2 Preconditioning .6
5.3 Initial measurements .6
5.4 Testing .6
5.5 Recovery.7
5.6 Final measurements .7
6 Severity.7
7 Details to be specified .8
Annex A (informative) Minimum temperature value in Finland .9
Bibliography.10
Figure 1 – Temperature change cycle .7
---------------------- Page: 8 ----------------------
SIST EN 61300-2-47:2011
61300-2-47 © IEC:2010 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 2-47: Tests – Thermal shocks
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.