SIST EN 61196-4:2004

Coaxial communication cables -- Part 4: Sectional specification for radiating cables

Covers the requirements for flexible and semi-flexible radiating coaxial communication cables. It specifies preferred ratings and characteristics for radiating cables and enables selection of the appropriate tests and performance levels from the generic specification for inclusion in the detail specification.

Koaxiale Kommunikationskabel -- Teil 4: Rahmenspezifikation für abstrahlende Kabel

Câbles coaxiaux de communication -- Partie 4: Spécification intermédiaire pour câbles rayonnants

Couvre les exigences pour les câbles de communication coaxiaux rayonnants souples ou semi-rigides. Elle spécifie les valeurs préférentielles et les caractéristiques pour les câbles rayonnants et elle permet une sélection des essais appropriés et des niveaux de performances, à partir de la spécification générique, afin de les inclure dans la spécification particulière.

Komunikacijski koaksialni kabli– 4. del: Področne specifikacije za sevalne kable (IEC 61196-4:2004)*

General Information

• Status: Published
• Publication Date: 31-Aug-2004
• ICS: 33.120.10 - Coaxial cables. Waveguides
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2004
• Due Date: 01-Sep-2004
• Completion Date: 01-Sep-2004
• Ref Project: EN 61196-4:2004 - Coaxial communication cables - Part 4: Sectional specification for radiating cables

Standards Content (Sample)

SLOVENSKI SIST EN 61196-4:2004

STANDARD
september 2004
Komunikacijski koaksialni kabli– 4. del: Področne specifikacije za sevalne
kable (IEC 61196-4:2004)*
Coaxial communication cables - Part 4: Sectional specification for radiating cables
(IEC 61196-4:2004)
ICS 33.120.10 Referenčna številka
SIST EN 61196-4:2004(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61196-4
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2004

ICS 33.120.10


English version


Coaxial communication cables
Part 4: Sectional specification for radiating cables
(IEC 61196-4:2004)


Câbles coaxiaux de communication Koaxiale Kommunikationskabel
Partie 4: Spécification intermédiaire Teil 4: Rahmenspezifikation
pour câbles rayonnants für abstrahlende Kabel
(CEI 61196-4:2004) (IEC 61196-4:2004)






This European Standard was approved by CENELEC on 2004-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.


CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61196-4:2004 E

---------------------- Page: 2 ----------------------

EN 61196-4:2004 - 2 -
Foreword

The text of document 46A/582/FDIS, future edition 2 of IEC 61196-4, prepared by SC 46A, Coaxial
cables, of IEC TC 46, Cables, wires, waveguides, r.f. connectors, r.f. and microwave passive
components and accessories, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 61196-4 on 2004-03-01.

This standard is to be used in conjunction with EN 61196-1.

The following dates were fixed:

– latest date by which the EN has to be implemented
 at national level by publication of an identical
 national standard or by endorsement (dop) 2004-12-01

– latest date by which the national standards conflicting
 with the EN have to be withdrawn (dow) 2007-03-01

Annex ZA has been added by CENELEC.
__________

Endorsement notice

The text of the International Standard IEC 61196-4:2004 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61196-4:2004
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60068 Series Environmental testing EN 60068 Series

1)
IEC 60332 Series Tests on electric cables under fire - -
conditions

2)
IEC 60754 Series Test on gases evolved during - -
combustion of materials from cables

3)
IEC 61034 Series Measurement of smoke density of - -
cables burning under defined conditions

IEC 61196-1 1995 Radio-frequency cables - -
Part 1: Generic specification - General,
definitions, requirements and test
methods
A1 1999 - -




1)
The series EN 50266, which is related to the series IEC 60332, applies.
2)
The series EN 50267, which is related to the series IEC 60754, applies.
3)
The series EN 50268, which is related to the series IEC 61034, applies.

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE IEC
61196-4
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2004-01
Câbles coaxiaux de communication –
Partie 4:
Spécification intermédiaire
pour câbles rayonnants
Coaxial communication cables –
Part 4:
Sectional specification
for radiating cables
© IEC 2004 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
Q
Commission Electrotechnique Internationale PRICE CODE
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

61196-4 © IEC:2004 – 3 –
CONTENTS
FOREWORD.5
1 Scope.9
2 Normative references.9
3 Terms and definitions .11
4 Preferred ratings and characteristics .11
4.1 Classes.11
4.2 Characteristic impedance.11
5 Marking.11
6 Test and measurement procedures and conditions .11
6.1 Standard atmospheric conditions of testing .11
6.2 Methods of measurement.11
6.3 Physical.13
7 Information to be included in detail specification.13
8 Packaging.13
Annex A (normative) Attenuation constant .15
A.1 Procedure .15
A.2 Measurement (see Figures A.1 and A.2).15
A.3 Evaluation .15
A.4 Requirement.17
Annex B (normative) Coupling loss .23
B.1 Procedure .23
B.2 Measurement (see Figures B.3 and B.4).25
B.3 Evaluation .25
B.4 Requirement.27
Annex C (normative) Procedures for quality matters .33
Figure A.1 – Attenuation constant with ground-level method .19
Figure A.2 – Attenuation constant with free-space method.21
Figure B.1 – Antenna orientations with ground-level method .23
Figure B.2 – Antenna orientations with free-space method.25
Figure B.3 – Coupling loss with ground-level method .29
Figure B.4 – Coupling loss with free-space method.31

---------------------- Page: 6 ----------------------

61196-4 © IEC:2004 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
COAXIAL COMMUNICATION CABLES –
Part 4: Sectional specification for radiating cables
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61196-4 has been prepared by subcommittee 46a: Coaxial cables,
of IEC technical committee 46: Cables, wires, waveguides, r.f. connectors, r.f. and microwave
passive components and accessories.
This second edition cancels and replaces the first edition published in 1995. This edition
constitutes a technical revision.
The main changes with respect to the previous edition are as follows:
a) Frequency limitation removed from the scope;
b) New requirement for performance in fire;
c) Changes to the procedure, measurement and evaluation of the
...