SIST EN 13083:2009
Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
Specification of the performance requirements and the critical dimensions of the adaptor for bottom loading and unloading. It also specifies the tests necessary to verify the compliance of the equipment with the standard. The equipment specified by the standard will be suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR - European Agreement concerning the international carriage of dangerous goods by road - (flammable liquids) which have a vapour pressure not exceeding 110 kPa at 50 °C (including petrol), and which have no subclassification as toxic or corrosive.
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - VK-Kupplung für Untenbefüllung und -entladung
Diese Europäische Norm behandelt von außen zu betätigende und selbsttätige VK-Kupplungen für
Untenbefüllung und -entladung.
In dieser Europäischen Norm sind die Leistungsanforderungen und die wesentlichen Maße der VK-Kupplung
für Untenbefüllung und -entladung festgelegt. Weiterhin sind die Prüfungen festgelegt, mit denen
nachgewiesen werden kann, ob die Ausrüstung den Anforderungen dieser Europäischen Norm entspricht. Die
in dieser Norm beschriebene Ausrüstung ist zum Umfüllen flüssiger Erdölerzeugnisse und anderer
gefährlicher Güter der Klasse 3 des ADR [2] geeignet, deren Dampfdruck bei 50 °C max. 110 kPa beträgt
(einschließlich Ottokraftstoff) und die nicht als giftig oder ätzend eingestuft sind.
Citernes de transport de matieres dangereuses - Équipement de service pour citernes - Adaptateur pour le chargement et le déchargement par le bas
La présente Norme européenne traite des adaptateurs actionnés de l’extérieur et automatiques destinés aux opérations de chargement et de déchargement par le bas.
Elle spécifie les performances requises et les dimensions essentielles des adaptateurs pour le chargement et le déchargement par le bas. Elle spécifie également les essais a réaliser pour vérifier la conformité des équipements a la norme. Les équipements spécifiés par la présente norme conviennent a une utilisation avec des produits pétroliers liquides et autres matieres dangereuses de la classe 3 de l’ADR [1] dont la tension de vapeur ne dépasse pas 110 kPa a 50 °C (y compris l’essence), et qui n’appartiennent a aucune sous classification des produits toxiques ou corrosifs.
Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Priključek za polnjenje in praznjenje s spodnje strani
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - VK-Kupplung für Untenbefüllung und -entladungCiternes de transport de matieres dangereuses - Équipement de service pour citernes - Adaptateur pour le chargement et le déchargement par le basTanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading23.040.60Prirobnice, oglavki in spojni elementiFlanges, couplings and joints23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 13083:2008SIST EN 13083:2009en,fr,de01-januar-2009SIST EN 13083:2009SLOVENSKI
STANDARDSIST EN 13083:20021DGRPHãþD
SIST EN 13083:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13083November 2008ICS 13.300; 23.020.20; 23.040.60Supersedes EN 13083:2001
English VersionTanks for transport of dangerous goods - Service equipment fortanks - Adaptor for bottom loading and unloadingCiternes de transport de matières dangereuses -Équipement de service pour citernes - Adaptateur pour lechargement et le déchargement par le basTanks für die Beförderung gefährlicher Güter -Bedienungsausrüstung von Tanks - VK-Kupplung fürUntenbefüllung und -entladungThis European Standard was approved by CEN on 13 September 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13083:2008: ESIST EN 13083:2009
EN 13083:2008 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Function.6 5 Design characteristics.6 5.1 Type.6 5.2 Actuation.6 5.3 Pressure rating.6 5.4 Materials of construction.7 5.5 Temperature range.7 5.6 Product identification and communication systems.7 5.7 Interlocks.7 5.8 Mounting.7 5.9 Position indicator (optional).7 5.10 Presence of product in the adaptor.8 5.11 Overall size.8 5.12 Liquid seals.8 5.13 Drainage.8 5.14 Adaptor cap.8 6 Tests.8 6.1 General.8 6.2 Production tests.8 6.3 Type tests.9 7 Marking.11 8 Installation, operation and maintenance instructions.12 Annex A (normative)
Adaptor nose.13 Annex B (informative)
Optional interlock actuator.14 Annex C (informative)
Allocation of function sectors.15 Annex D (informative)
4 hole fixing.17 Bibliography.18
SIST EN 13083:2009
EN 13083:2008 (E) 3 Foreword This document (EN 13083:2008) has been prepared by Technical Committee CEN/TC 296 “Tanks for transport of dangerous goods”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by May 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13083:2001. This European Standard forms part of a coherent standards programme comprising the following standards, under the general title "Tanks for transport of dangerous goods - Service equipment for tanks": EN 13081, Vapour collection adaptor and coupler EN 13082, Vapour transfer valve EN 13083, Adaptor for bottom loading and unloading EN 13308, Non-pressure balanced footvalve EN 13314, Fill hole cover EN 13315, Gravity discharge coupler EN 13316, Pressure balanced footvalve EN 13317, Manhole cover assembly EN 13922, Overfill prevention systems for liquid fuels EN 14595, Pressure and Vacuum Breather Vent EN 14596, Emergency pressure relief valve EN 15208, Sealed parcel delivery systems – Working principles and interface specifications The standards programme also includes the following Technical Report: CEN/TR 15120, Guidance and recommendations for loading, transport and unloading. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 13083:2009
EN 13083:2008 (E) 4 Introduction The adaptor for bottom loading and unloading, subject of this European Standard, allows the transfer of product through a mating loading coupler to a transport tank and from the tank to a service station tank by a mating gravity discharge coupler. It is required to comply with the European Directive 94/63/EC on Volatile Organic Compounds (VOC) [1]. SIST EN 13083:2009
EN 13083:2008 (E) 5 1 Scope This European Standard covers externally actuated and self actuated adaptors for bottom loading and unloading. This European Standard specifies the performance requirements and the critical dimensions of the adaptor for bottom loading and unloading. It also specifies the tests necessary to verify the compliance of the equipment with this European Standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no subclassification as toxic or corrosive. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12266-1:2003, Industrial valves — Testing of valves — Part 1: Pressure tests, test procedures and acceptance criteria — Mandatory requirements EN 12266-2:2002, Industrial valves — Testing of valves — Part 2: Tests, test procedures and acceptance criteria — Supplementary requirements EN ISO 1302, Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation (ISO 1302:2002) EN ISO 4287, Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters (ISO 4287:1997) ISO 2859-1, Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 Maximum Working Pressure (MWP) (gauge pressure) maximum pressure to which the equipment is designed to operate, being the highest of the following three pressures: a) highest effective pressure allowed in the tank during filling (maximum filling pressure allowed) b) highest effective pressure allowed in the tank during discharge (maximum discharge pressure allowed) c) effective gauge pressure to which the tank is subjected by its contents (including such extraneous gases as it may contain) at the maximum working temperature 3.2 produ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.