SIST EN 13081:2009+A1:2012
(Main)Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
This European Standard covers the vapour collection adaptor and coupler used to achieve a vapour tight path between the transport tank and the stationary loading and unloading facilities.
This European Standard specifies the performance requirements and the critical dimensions of the vapour recovery adaptor fitted to the tank and the mating coupler fitted to a hose or to pipework connected to the stationary loading and unloading facilities. It also specifies the tests necessary to verify the compliance of the equipment with this standard. The equipment specified by this European Standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa, at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - VKG- und MKG-Kupplungen für die Gassammelleitung
Diese Europäische Norm behandelt Ausrüstungen, die verwendet werden, um eine gasdichte Verbindung zwischen dem Transporttank und den stationären Befüll- und Entladeeinrichtungen herzustellen.
In dieser Europäischen Norm sind die Leistungsanforderungen und die wesentlichen Maße der VKG-Kupplung am Transporttank und der MKG-Kupplung am Rohrleitungssystem der stationären Befüll- und Entladeeinrichtungen festgelegt. Weiterhin sind die Prüfungen festgelegt, mit denen nachgewiesen werden kann, ob die Ausrüstung den Anforderungen dieser Norm entspricht. Die in dieser Europäischen Norm beschriebene Ausrüstung ist zum Umfüllen flüssiger Erdölerzeugnisse und anderer gefährlicher Güter der Klasse 3 des ADR [2] geeignet, deren Dampfdruck bei 50 °C max. 110 kPa beträgt (einschließlich Ottokraft-stoff) und die nicht als giftig oder ätzend eingestuft sind.
Citernes de transport de matières dangereuses - Equipement de service pour citernes - Adaptateur et coupleur pour la récupération des vapeurs
La présente Norme européenne traite de l’adaptateur et du coupleur pour la récupération des vapeurs utilisés pour l’établissement d’un circuit étanche aux vapeurs entre la citerne de transport et les installations fixes de chargement et de déchargement.
La présente Norme européenne spécifie les performances requises et les dimensions essentielles de l’adaptateur pour la récupération des vapeurs monté sur la citerne et du coupleur correspondant monté sur le flexible ou sur le tuyau de raccordement de l’installation fixe de chargement et de déchargement. Elle spécifie également les essais à réaliser pour vérifier la conformité des équipements à cette norme. Les équipements spécifiés dans la présente Norme européenne conviennent à une utilisation avec des produits pétroliers liquides et d’autres matières dangereuses de la classe 3 de l’ADR [2] dont la tension de vapeur ne dépasse pas 110 kPa à 50 °C (y compris l’essence) et qui n’appartiennent à aucune sous classification des produits toxiques ou corrosifs.
Cisterne za prevoz nevarnega blaga - Oprema za oskrbovanje cistern - Spojka za zbiralnik pare (vključno z dopolnilom A1)
Ta evropski standard zajema spojko za zbiralnik pare, ki se uporablja za doseganje parotesne poti med cisterno za prevoz ter stacionarnimi napravami za nalaganje in razlaganje.
Ta evropski standard določa zahteve za učinkovitost in kritične mere spojke za zbiralnik pare, pritrjene na cisterno, in spojnika, pritrjenega na cev ali cevovod, priključen na stacionarne naprave za nalaganje in razlaganje. Določa tudi preskuse, potrebne za preverjanje skladnosti opreme s tem standardom. Oprema, ki jo določa ta evropski standard, je primerna za uporabo s tekočimi naftnimi proizvodi in drugimi nevarnimi snovmi kategorije 3 ADR [2], katerih parni tlak ne presega 110 kPa pri 50 °C, ter z motornim bencinom, pri čemer niso dodatno opredeljeni kot strupeni ali korozivni.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - VKG- und MKG-Kupplungen für die GassammelleitungCiternes de transport de matières dangereuses - Equipement de service pour citernes - Adaptateur et coupleur pour la récupération des vapeursTanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler23.040.60Prirobnice, oglavki in spojni elementiFlanges, couplings and joints23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 13081:2008+A1:2012SIST EN 13081:2009+A1:2012en,fr,de01-junij-2012SIST EN 13081:2009+A1:2012SLOVENSKI
STANDARDSIST EN 13081:20091DGRPHãþD
SIST EN 13081:2009+A1:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13081:2008+A1
February 2012 ICS 23.040.60; 13.300; 23.020.20 Supersedes EN 13081:2008English Version
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
Citernes de transport de matières dangereuses - Equipement de service pour citernes - Adaptateur et coupleur pour la récupération des vapeurs
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - VKG- und MKG-Kupplungen für die Gassammelleitung This European Standard was approved by CEN on 13 September 2008 and includes Amendment 1 approved by CEN on 24 December 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13081:2008+A1:2012: ESIST EN 13081:2009+A1:2012
EN 13081:2008+A1:2012 (E) 2 Contents Page Foreword .3Introduction .51Scope .62Normative references .63Terms and definitions .64Function .75Design characteristics .75.1General .75.2Performance characteristics .75.3Pressure ratings.75.4Temperature range .75.5Materials of construction .75.6Dimensional characteristics .86Tests .86.1General .86.2Production tests.86.2.1General .86.2.2Shell tightness test .96.2.3Internal seat tightness test .96.2.4Operability test .96.2.5Test results .96.3Type tests .96.3.1General .96.3.2Shell strength test. 106.3.3Shell tightness test . 106.3.4Internal seat tightness test . 106.3.5Mechanical endurance test . 106.3.6Mechanical strength test . 106.3.7Test results . 117Marking . 118Installation, operation and maintenance instructions . 11Annex A (normative)
Vapour collection adaptor to be fitted on the transport tank . 12Annex B (normative)
Vapour collection coupler to be fitted to the stationary loading and unloading facility . 14Annex C (normative)
Interlock and other devices . 15C.1Interlock . 15C.2DTQM tank identifier . 16Annex D (informative)
4 hole fixing . 17Bibliography . 18 SIST EN 13081:2009+A1:2012
EN 13081:2008+A1:2012 (E) 3 Foreword This document (EN 13081:2008+A1:2012) has been prepared by Technical Committee CEN/TC 296 “Tanks for transport of dangerous goods”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 13081:2008". This document includes Amendment 1 approved by CEN on 2011-12-24. The start and finish of text introduced or altered by amendment is indicated in the text by tags !". !Compared to EN 13081:2008 the following changes have been made: a) in 3.2 a definition for "probe" has been added; b) in Annex A (normative) specifications for the opening of the adaptor have been added; c) in Annex B (normative) specifications for the opening of the coupler have been added; d) in Annex C (normative) specifications for the interlock have been added." This European standard forms part of a coherent standards programme comprising the following standards, under the general title "Tanks for transport of dangerous goods - Service equipment for tanks" EN 13081, Vapour collection adaptor and coupler EN 13082, Vapour transfer valve EN 13083, Adaptor for bottom loading and unloading EN 13308, Non pressure balanced footvalve EN 13314, Fill hole cover EN 13315, Gravity discharge coupler EN 13316, Pressure balanced footvalve EN 13317, Manhole cover assembly EN 13922, Overfill prevention systems for liquid fuels EN 14595, Pressure and Vacuum Breather Vent EN 14596, Emergency pressure relief valve EN 15208, Sealed parcel delivery systems – Working principles and interface specifications SIST EN 13081:2009+A1:2012
EN 13081:2008+A1:2012 (E) 4 The standards programme also includes the following Technical Report: CEN/TR 15120, Tanks for transport of dangerous goods - Guidance and recommendations for loading, transport and unloading. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 13081:2009+A1:2012
EN 13081:2008+A1:2012 (E) 5 Introduction The vapour collection adaptor and coupler are part of the vapour collection system that is required to comply with the European Directive 94/63/EC on Volatile Organic Compounds (VOC) [1]. The vapour collection adaptor and coupler establish a vapour tight path between the transport tank and the stationary loading and unloading facilities. SIST EN 13081:2009+A1:2012
EN 13081:2008+A1:2012 (E) 6 1 Scope This European Standard covers the vapour collection adaptor and coupler used to achieve a vapour tight path between the transport tank and the stationary loading and unloading facilities. This European Standard specifies the performance requirements and the critical dimensions of the vapour recovery adaptor fitted to the tank and the mating coupler fitted to a hose or to pipework connected to the stationary loading and unloading facilities. It also specifies the tests necessary to verify the compliance of the equipment with this standard. The equipment specified by this European Standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa, at 5
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.