oSIST prEN 4013 rev:2023
(Main)Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature) / 600 °C
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature) / 600 °C
This document specifies the characteristics of self-locking, shank nuts, in NI-PH2601, silver plated, for aerospace applications.
Classification: 1 550 MPa 1 / 600 °C 2 .
1 Correspond to the minimum tensile stress which the nut is able to withstand at ambient temperature without breaking or cracking when tested with a bolt of a higher strength class.
2 Maximum test temperature of the parts.
Luft- und Raumfahrt - Einnietmutter, selbstsichernd, aus hochwarmfester Nickelbasislegierung NI-PH2601 (Inconel 718), versilbert - Klasse: 1 550 MPa (bei Raumtemperatur) / 600 °C
No Scope Available
Série aérospatiale - Écrous à sertir, à freinage interne, en alliage résistant à chaud à base de nickel NI-PH2601 (Inconel 718), argentés - Classification : 1 550 MPa (à température ambiante ) / 600 °C
Le présent document spécifie les caractéristiques des écrous à sertir, à freinage interne, en NI-PH2601, argentés, pour les applications aérospatiales.
Classification : 1 550 MPa /600 °C.
Aeronavtika - Zakovičene matice, samovarovalne, iz toplotnoodporne zlitine na nikljevi osnovi NI-PH2601 (Inconel 718), posrebrene - Klasifikacija: 1550 MPa (pri temperaturi okolice)/600 °C
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 4013 rev:2023
01-april-2023
Nadomešča:
SIST EN 4013:2005
Aeronavtika - Zakovičene matice, samovarovalne, iz toplotnoodporne zlitine na
nikljevi osnovi NI-PH2601 (Inconel 718), posrebrene - Klasifikacija: 1550 MPa (pri
temperaturi okolice)/600 °C
Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-
PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature)
/ 600 °C
Luft- und Raumfahrt - Einnietmutter, selbstsichernd, aus hochwarmfester
Nickelbasislegierung NI-PH2601 (Inconel 718), versilbert - Klasse: 1 550 MPa (bei
Raumtemperatur) / 600 °C
Série aérospatiale - Écrous à sertir, à freinage interne, en alliage résistant à chaud à
base de nickel NI-PH2601 (Inconel 718), argentés - Classification : 1 550 MPa (à
température ambiante ) / 600 °C
Ta slovenski standard je istoveten z: prEN 4013
ICS:
49.030.30 Matice Nuts
oSIST prEN 4013 rev:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 4013 rev:2023
---------------------- Page: 2 ----------------------
oSIST prEN 4013 rev:2023
DRAFT
EUROPEAN STANDARD
prEN 4013
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2023
ICS 49.030.30 Will supersede EN 4013:2004
English Version
Aerospace series - Shank nuts, self-locking, in heat
resisting nickel base alloy NI-PH2601 (Inconel 718), silver
plated - Classification: 1 550 MPa (at ambient
temperature) / 600 °C
Série aérospatiale - Écrous à sertir, à freinage interne, Luft- und Raumfahrt - Einnietmutter, selbstsichernd,
en alliage résistant à chaud à base de nickel NI-PH2601 aus hochwarmfester Nickelbasislegierung NI-PH2601
(Inconel 718), argentés - Classification : 1 550 MPa (à (Inconel 718), versilbert - Klasse: 1 550 MPa (bei
température ambiante ) / 600 °C Raumtemperatur) / 600 °C
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4013:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4013 rev:2023
prEN 4013:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Required characteristics . 5
4.1 Configuration – Dimensions – Tolerances – Masses . 5
4.2 Material .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.