SIST EN 2535:2011
(Main)Aerospace series - Vacuum deposition of cadmium
Aerospace series - Vacuum deposition of cadmium
This standard defines the method for depositing cadmium layers according to the vacuum deposition process, for use in aerospace construction.
According to this process, cadmium metal is vaporised under vacuum and deposited directly on the base material with an interlayer. The coating produced in this way is ductile and electrically conductive.
This standard is applicable whenever referenced.
Luft- und Raumfahrt - Aufdampfen von Kadmium im Vakuum
Diese Europäische Norm legt das Verfahren zum Aufdampfen von Kadmiumschichten durch Vakuum-Aufdampfverfahren zur Verwendung bei Konstruktionen in Luft- und Raumfahrt fest.
Nach diesem Verfahren wird im Vakuum Kadmiummetall verdampft und mit einer Zwischenschicht direkt auf dem Grundwerkstoff niedergeschlagen. Die so erzeugte Schicht ist duktil und elektrisch leitend.
Diese Norm ist immer dann anzuwenden, wenn auf sie verwiesen wird.
Série aérospatiale - Cadmiage sous vide
Cette Norme européenne définit la méthode pour déposer des couches de cadmium selon le procédé de cadmiage sous vide, pour utilisation dans les constructions aéronautiques.
Selon ce procédé, le métal cadmié est vaporisé sous vide et déposé directement sur le matériau de base avec une couche intermédiaire. Le revêtement produit de cette manière est ductile et électriquement conducteur.
La présente norme est applicable chaque fois qu’elle est citée en référence.
Aeronavtika - Usedline kadmija v vakuumu
Ta evropski standard opredeljuje metodo za odlaganje plasti kadmija v skladu s postopkom usedlin v vakuumu, za uporabo v aeronavtični gradnji. V skladu s tem postopkom, se kadmijeva kovina upari v vakuumu in odlaga neposredno na osnovni material z vmesnim slojem. Premaz, ki se proizvaja tako, je duktilen in električno prevoden. Ta standard se uporablja, kadar je naveden.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Usedline kadmija v vakuumuLuft- und Raumfahrt - Aufdampfen von Kadmium im VakuumSérie aérospatiale - Cadmiage sous videAerospace series - Vacuum deposition of cadmium49.040Prevleke in z njimi povezani postopki, ki se uporabljajo v letalski in vesoljski industrijiCoatings and related processes used in aerospace industryICS:Ta slovenski standard je istoveten z:EN 2535:2011SIST EN 2535:2011en,de01-november-2011SIST EN 2535:2011SLOVENSKI
STANDARD
SIST EN 2535:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2535
June 2011 ICS 49.040 English Version
Aerospace series - Vacuum deposition of cadmium
Série aérospatiale - Cadmiage sous vide
Luft- und Raumfahrt - Aufdampfen von Kadmium im Vakuum This European Standard was approved by CEN on 12 February 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2535:2011: ESIST EN 2535:2011
EN 2535:2011 (E) 2 Contents PageForeword .4 1 Scope .5 2 Normative references .5 3 Purpose of process .5 4 Limitation of process use .5 5 Definitions .6 6 Thickness .6 7 Apparatus and materials .6 7.1 Vacuum enclosure .6 7.2 Deposition material.6 7.3 Masking material .6 8 Information for the processor .7 9 Condition of parts prior to processing .7 9.1 General .7 9.2 Stress relief treatment .7 10 Process schedule .7 11 Pre-treatment .8 11.1 Degreasing .8 11.2 Abrasive blasting .8 12 Treatment .8 12.1 Suspension and clamping of parts .8 12.2 Evacuation of the enclosure (primary vacuum) .8 12.3 Sputter cleaning .8 12.4 Deposition .8 12.5 Flooding, venting .9 12.6 Removal .9 13 Post-treatment .9 13.1 Chromating .9 13.2 Additional protection .9 14 Removal of the coating .9 14.1 Chemical process .9 14.2 Mechanical process .9 15 Required characteristics . 10 15.1 Appearance . 10 15.2 Thickness of the layer . 10 15.3 Adhesion . 10 15.4 Corrosion resistance . 10 16 Inspection . 10 16.1 Inspection of vacuum deposited parts and samples . 10 16.1.1 Appearance . 10 16.1.2 Inspection of the thickness of the coating . 10 16.1.3 Adhesion test . 10SIST EN 2535:2011
EN 2535:2011 (E) 3 Page16.1.4 Corrosion test for steel .1117 Quality assurance . 11 17.1 Approval of the processor . 11 17.2 Process approval . 11 17.3 Acceptance . 11 17.4 Reprocessing . 12 18 Health, safety and environmental aspects . 12 19 Designation . 12
SIST EN 2535:2011
EN 2535:2011 (E) 4 Foreword This document (EN 2535:2011) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2011, and conflicting national standards shall be withdrawn at the latest by December 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 2535:2011
EN 2535:2011 (E) 5 1 Scope This European Standard defines the method for depositing cadmium layers according to the vacuum deposition process, for use in aerospace construction. According to this process, cadmium metal is vaporised under vacuum and deposited directly on the base material with an interlayer. The coating produced in this way is ductile and electrically conductive. This standard should be applicable whenever referenced. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2828, Aerospace series — Adhesion test for metallic coatings by burnishing EN 9100, Aerospace series - Quality management systems - Requirements (based on ISO 9001:2000)
and Quality systems - Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994) EN ISO 1463, Metallic and oxide coatings — Measurement of coating thickness — Microscopical method EN ISO 2082, Metallic and other inorganic coatings - Electroplated coatings of cadmium with supplementary treatments on iron or steel (ISO 2082:2008) EN ISO 2177, Metallic coatings — Measu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.