iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1501-2:2005/kFprA1:2009

(Amendment)

Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles

Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles

Abfallsammelfahrzeuge und die dazugehörigen Schüttungen - Allgemeine Anforderungen und Sicherheitsanforderungen - Teil 2: Seitenlader

Bennes de collecte des déchets et leurs lève-conteneurs associés - Exigences générales et exigences de sécurité - Partie 2: Bennes à chargement latéral

Abfallsammelfahrzeuge und die dazugehörigen Schüttungen - Allgemeine Anforderungen und Sicherheitsanforderungen - Teil 2: Seitenlader

Vozila za zbiranje odpadkov in pripadajoči iztresalniki - Splošne in varnostne zahteve - 2. del: Vozila za zbiranje odpadkov z nakladanjem s strani

General Information

Status
Not Published
Public Enquiry End Date
30-Jun-2009
ICS
43.160 - Special purpose vehicles
Technical Committee
I13 - Imaginarni 13
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
08-Oct-2019
Due Date
13-Oct-2019
Completion Date
08-Oct-2019
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
EN 1501-2:2005/FprA1 - Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles

Relations

Consolidated By
SIST EN 1501-2:2005+A1:2010 - Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles
Effective Date
18-Jan-2023
Amends
SIST EN 1501-2:2005 - Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles
Effective Date
01-Jun-2009
Consolidated By
SIST EN 1501-2:2005+A1:2010 - Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles
Effective Date
19-Jan-2023
Consolidated By
SIST EN 1501-2:2005+A1:2010 - Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles
Effective Date
01-Jan-2010

Buy Standard

EN 1501-2:2005/kFprA1:2009EN 1501-2:2005/kFprA1:2009
PreviousNext
Draft
EN 1501-2:2005/kFprA1:2009
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1501-2:2005/kFprA1:2009
01-junij-2009
9R]LOD]D]ELUDQMHRGSDGNRYLQSULSDGDMRþLL]WUHVDOQLNL6SORãQHLQYDUQRVWQH
]DKWHYHGHO9R]LOD]D]ELUDQMHRGSDGNRY]QDNODGDQMHPVVWUDQL
Refuse collection vehicles and associated lifting devices - General requirements and
safety requirements - Part 2: Side loaded refuse collection vehicles
Abfallsammelfahrzeuge und die dazugehörigen Schüttungen - Allgemeine
Anforderungen und Sicherheitsanforderungen - Teil 2: Seitenlader
Bennes de collecte des déchets et leurs lève-conteneurs associés - Exigences générales
et exigences de sécurité - Partie 2: Bennes à chargement latéral
Ta slovenski standard je istoveten z: EN 1501-2:2005/FprA1
ICS:
43.160 Vozila za posebne namene Special purpose vehicles
SIST EN 1501-2:2005/kFprA1:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1501-2:2005/kFprA1:2009

---------------------- Page: 2 ----------------------

SIST EN 1501-2:2005/kFprA1:2009
EUROPEAN STANDARD
FINAL DRAFT
EN 1501-2:2005
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
April 2009
ICS 43.160

English Version
Refuse collection vehicles and associated lifting devices -
General requirements and safety requirements - Part 2: Side
loaded refuse collection vehicles
Bennes de collecte des déchets et leurs lève-conteneurs Abfallsammelfahrzeuge und die dazugehörigen
associés - Exigences générales et exigences de sécurité - Schüttungen - Allgemeine Anforderungen und
Partie 2: Bennes à chargement latéral Sicherheitsanforderungen - Teil 2: Seitenlader
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 183.
This draft amendment A1, if approved, will modify the European Standard EN 1501-2:2005. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1501-2:2005/FprA1:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1501-2:2005/kFprA1:2009
EN 1501-2:2005/FprA1:2009 (E)
Contents Page
Foreword .3
1 Modification to Clause 2 .4
2 Modification to Clause 6 .4
3 Modifications to Clause 7 .4
4 Addition of Annex ZB .6

2

---------------------- Page: 4 ----------------------

SIST EN 1501-2:2005/kFprA1:2009
EN 1501-2:2005/FprA1:2009 (E)
Foreword
This document (EN 1501-2:2005/FprA1:2009) has been prepared by Technical Committee CEN/TC 183
“Waste management”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
For relationship with EC Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.
3

---------------------- Page: 5 ----------------------

SIST EN 1501-2:2005/kFprA1:2009
EN 1501-2:2005/FprA1:2009 (E)
1 Modification to Clause 2
Add the following reference:
“EN 1501-4:2007, Refuse collection vehicles and their associated lifting devices – General requirements and
safety requirements — Part 4: Noise test code for
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1501-4:2023(Main)
Refuse collection vehicles - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles
EN 1501-4:2023

This European Standard provides all of the information required in order to efficiently perform, and in standardized conditions, the determination, the declaration and the verification of noise emission values of refuse collection vehicles.
The use of this annex ensures the reproducibility of the determination of noise emission values within the limits established for the accuracy grade of the basic standard used to determine noise emission values. The methods used to determine these noise emission values, corresponding to this normative annex, are grade 2 accuracy measurement methods.
This standard deals with the noise measurement conditions for the types of RCVs defined and described in the standards of the EN 1501 series
This European Standard applies to machines which are manufactured after the date of approval of this standard by CEN.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17106-3-1:2021(Main)
Road operation machinery - Safety - Part 3-1: Winter service machines - Requirements for snow clearing machines with rotating tools and snow ploughs
EN 17106-3-1:2021

This document, together with part 1, deals with all significant hazards for winter service machines – snow cleaning machines with rotating tools when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in
prEN xxx-1:20xx.
This document does not repeat the requirements from prEN xxx-1:20xx, but adds or replaces the requirements for application for winter service machines – snow cleaning machines with rotating tools.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17106-2:2021(Main)
Road operation machinery - Safety - Part 2: Specific requirements for road surface cleaning machines
EN 17106-2:2021

This document, together with part 1, deals with all significant hazards for road surface cleaning machines when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in
prEN xxx-1:20xx.
This document does not repeat the requirements from prEN xxx-1:20xx, but adds or replaces the requirements for application for road surface cleaning machines.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17106-3-2:2021(Main)
Road operation machinery - Safety - Part 3-2: Winter service machines - Specific requirements for spreading machines
EN 17106-3-2:2021

This European Standard, together with part 1, deals with all significant hazards for winter service machines - spreading machines when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in
prEN 17106-1.
This document does not repeat the requirements from prEN 17106-1, but adds or replaces the requirements for application for winter service machines - spreading machines.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17106-1:2021(Main)
Road operation machinery - Safety - Part 1: General requirements
EN 17106-1:2021

This document specifies the common safety requirements for road operation machinery.
This document deals with the significant hazards common to road operation machinery, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (transport, assembly, dismantling, equipment in service and out of service, maintenance, moving on site, storage, disabling and scrapping).
NOTE    The requirements specified in this part of the standard are common to two or more families of road operation machinery.
This document gives safety requirements for all types of road operation machinery and shall be used in conjunction with one of parts x to xx.
These machine specific parts do not repeat the requirements from part 1 but supplement or modify the requirements for the type of road operation machinery in question.
This European Standard applies to:
a)   Road surface cleaning machines (as currently defined in EN 15429-1);
b)   Winter service machines (as defined in group 1 and 2 of EN 15144);
c)   Road service area maintenance machines for:
   grass cutting (see Clause 3.1.1.1 of EN 15436-1:2008);
   brush/hedge cutting (see Clause 3.1.1.2 of EN 15436-1:2008);
   mechanical plant/branch cutting (see Clauses 3.1.2 and 3.2.3 of EN 15436-1:2008).
This standard deals with:
a)   equipment permanently mounted on carrier vehicles;
b)   interchangeable equipment;
c)   self-propelled machinery with an integrated  specially designed chassis;
d)   trailed machines;
e)   interfaces.
For multipurpose machinery the parts of the standard that cover the specific functions and applications have to be used, e.g. sweeper used for spreading thawing material or snow removing machines with brooms and ploughs shall use the relevant requirements of prEN xxx parts x, x, x.
Road operation machinery within the scope of prEN xxx parts x to x may include interchangeable auxiliary equipment within the scope of prEN xxx part x either as an integral part of its construction or as interchangeably fitted equipment.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17106-4:2021(Main)
Road operation machinery - Safety - Part 4: Road service area maintenance machines - Requirements for grass and brush cutting machines
EN 17106-4:2021

This European Standard applies to machines used for road service area maintenance which are attached to or mounted on carrier vehicles (e.g. tractor, truck), or which are self-propelled machinery and which are defined in Clause 3. Directives and standards for the vehicular truck or tractor chassis aspect, termed 'carrier vehicle' in this standard, would be those relevant to that equipment.
For machinery which are a combination of a grass/brush-cutting attachment and a carrier-vehicle, this part of the standard applies to the grass or brush cutting attachment itself and with all health and safety requirements of the interaction and effects between attachment and the carrier vehicle when used together (e.g. stability, visibility).
For self-propelled machinery, this part only deals with health and safety requirements of the attachment itself and does not deal with the self-propelled machinery itself which are dealt with in EN 17106 1.
NOTE 1   Road regulations or Directive apply to vehicular truck and tractor.
NOTE 2   The use in public road traffic is governed by the national regulations.
This European Standard deals with all significant hazards identified through a risk assessment pertinent to road service area maintenance machines, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). This European Standard does not deal with significant hazards associated with EMC. This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards associated with machine operation, setting and adjustments, load discharge and routine maintenance.
This European Standard does not include requirements for the carrier vehicles (e.g. trucks, tractors, construction machines, industrial trucks). These are covered in directives related to the construction of vehicles.
This European Standard does not deal with:
—   walker-operated and hand-held machines;
—   machines for the maintenance of sports grounds;
—   machines for agriculture, horticulture and forestry;
—   pit and sewer cleaning vehicles/-machines;
—   grass and brush cutting machines with multiple cutting heads (see Annex A, Clause C.2, Figure C.20)
—   vertical axis grass and brush cutting machines except inter-post machinery (see Annex A, Clause C.2, Figure C.22)
—   horizontal axis grass and brush cutting machines with two rotors (see Annex A, Clause C.2, Figure C.23)
—   self-propelled remote controlled machinery for road service area maintenance, except the mowing head
—   self-propelled remote controlled machinery used for forestry application (see Annex A, Clause C.2, Figure C.21)
—   cleansing and ditch maintenance machines (see Annex A, Clause C.2, Figure C.24 and C.25)
A machine which is a combination of several parts with different uses should conform to all the standards referring to the corresponding parts of the machine.
This document, together with part 1, deals with all significant hazards for road service area maintenance machines – grass and brush cutting machines when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in prEN 17106 1:2017.
This document does not repeat the requirements from prEN 17106 1:2017, but adds or replaces the requirements for application for grass and brush cutting machines.
This European Standard does not deal with the risks associated with the operation of machines in potentially explosive atmospheres.
This standard applies to machines manufactured after the date of approval of this standard through CEN.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1501-2:2021(Main)
Refuse collection vehicles - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles
EN 1501-2:2021

This document applies to side loaded refuse collection vehicle (RCV), as defined in prEN 1501-1.
This document deals with all significant hazards, hazardous situations and events relevant to the side loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This document is applicable to the design and construction of the side loaded RCV so as to ensure that it is fit for its intended function and can be operated, moved, cleaned (including unblocking), adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the side loaded RCV.
This document describes and defines the safety requirements of side loaded RCV excluding the interface with the lifting device(s) and excluding the lifting device itself and excluding loader cranes, which could be mounted on the RCV.
Safety requirements for the lifting device(s) including the loader cranes and the interface to the RCV are defined in prEN 1501-5.
Safety requirements for loader cranes are defined in EN 12999.
This document also applies to compactors, operated on a truck for collecting purposes.
This document is not applicable to:
-   below −25 °C and above +40 °C temperatures;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships.
This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1501-5:2021(Main)
Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles
EN 1501-5:2021

This document deals with all significant hazards, hazardous situations and events relevant to lifting devices used for the emptying of designated refuse containers into RCVs and their fitting onto the RCVs when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer throughout their foreseeable lifetime as defined in Clause 4.
This document is applicable to the design and construction of the refuse container lifting devices and the mounting of other lifting devices so as to ensure that they are fitted for their function and can be operated, adjusted and maintained during their entire lifetime. It is not applicable to the end of life of the lifting devices.
This document describes and gives the safety requirements of the lifting devices for emptying refuse containers and their interfaces with the corresponding parts of the RCVs and will be used in conjunction with prEN 1501-1 for the rear, side and front loaded RCVs. It refers to EN 1501-4 for the noise test code.
This document is not applicable to:
-   operation in severe conditions e.g. extreme environmental conditions such as:
-   temperatures below −25 °C and above +40 °C;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   lifting and transportation of persons;
-   emptying refuse containers other than those manufactured according to EN 840 (all parts), EN 12574 (all parts), EN 13071 (all parts), and those described as paladin, diamond, skip containers;
-   loading bulky refuse by means of platform or forks;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships;
-   fitting and operation on stationary compactors.
This document is not applicable to machinery which is manufactured before the date of its publication by CEN.

  • Standard
    95 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1501-3:2021(Main)
Refuse collection vehicles - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
EN 1501-3:2021

This document applies to front loaded refuse collection vehicle (RCV), as defined in 3.2 with closed system defined in 3.13.
This document deals with all significant hazards, hazardous situations and events relevant to the front loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This document is applicable to the design and construction of the front loaded RCV so as to ensure that it is fitted for its function and can be operated adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the front loaded RCV.
prEN 1501-3 describes and defines the safety requirements of front loaded RCV excluding the interface with the lifting device(s) and excluding the lifting device itself and excluding loader cranes, which could be mounted on the RCV.
Safety requirements for the lifting device(s), loader cranes and their interface to the RCV are defined in prEN 1501-5.
Safety requirements for loader cranes are defined in EN 12999. Additional requirements to loader cranes installed as a loading device for handling containers for refuse or recyclable material on RCVs are defined in prEN 1501 5.
This document also applies to compactors, operated on a truck for collecting purposes.
This document is not applicable to:
-   operation in severe conditions e.g. extreme environmental conditions such as:
-   below −25 °C and above +40 °C temperatures;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships.
This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1501-1:2021(Main)
Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles
EN 1501-1:2021

This document applies to rear loaded refuse collection vehicles (RCV), as defined in 3.2.
This document deals with all significant hazards, hazardous situations and events relevant to the rear loaded RCV, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, throughout its foreseeable lifetime, as defined in Clause 4.
This document is applicable to the design and construction of the rear loaded RCV so as to ensure that it is fit for its function and can be operated, adjusted and maintained during its entire lifetime. It is not applicable to the end of life of the rear loaded RCV.
This document describes and defines the safety requirements of rear loaded RCVs excluding the interface tailgate/discharge door with the lifting device(s) and the lifting device(s) as illustrated in Figure A.1.
Safety requirements for the lifting device(s) and the interface with the tailgate/discharge door are defined in prEN 1501-5. Safety requirements for loader cranes are defined in EN 12999.
This European Standard is not applicable to:
-   operation in severe conditions, e.g. extreme environmental conditions such as:
-   below -25 °C and above +40 °C temperatures;
-   tropical environment;
-   wind velocity in excess of 75 km/h;
-   contaminating environment;
-   corrosive environment;
-   operation in potentially explosive atmospheres;
-   handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
-   operation on ships.
This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day