SIST EN 3545-004:2006

Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 004: Connectors with male contacts - Product standard

This standard specifies connectors with male contacts in the family of rectangular electrical connectors with sealed and non-sealed rear, plastic shell, locking device, for operating temperatures from - 55 °C to 175 °C.
These connectors may be used as receptacles (fixed housings) or plugs (free housings) in conjunction with the following coding and attachment system:
-   male coding and attachment system for mounting on a fixed housing;
-   female coding and attachment system for mounting on a free housing.

Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere Abdichtung, Plastikgehäuse, Verriegelungssystem, Betriebstemperaturen von - 55 °C bis 175 °C - Teil 004: Steckverbinder mit Stiftkontakten - Produktnorm

Diese Norm legt Steckverbinder mit Stiftkontakten aus der Familie der elektrischen Rechtecksteckverbinder, rückseitig abgedichtet und nicht abgedichtet, mit Plastikgehäuse und Verriegelung, für Betriebstemperaturen von ? 55 °C bis 175 °C fest.
Diese Steckverbinder können als feste Steckverbinder (feste Gehäuse) oder freie Steckverbinder (freie Gehäuse) eingesetzt werden, wenn folgende Kodierelemente zugeordnet sind:
-   Kodierstift zur Montage auf festem Steckverbindergehäuse;
-   Kodierbuchse zur Montage auf freiem Steckverbindergehäuse.

Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches a l'arriere, a boîtier en plastique, a verrouillage, températures d'utilisation - 55 °C a 175 °C - Partie 004 : Connecteurs a contacts mâles - Norme de produit

Aeronavtika – Konektorji, električni, pravokotni, s tesnilno kapo ali brez nje, plastičnim ohišjem, zapornim mehanizmom, z delovno temperaturo med –55 °C in 175 °C – 004. del: Konektorji z moškim kontaktom – Standard za proizvod

General Information

• Status: Published
• Publication Date: 30-Jun-2006
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jul-2006
• Due Date: 01-Jul-2006
• Completion Date: 01-Jul-2006
• Ref Project: EN 3545-004:2005 - Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 004: Connectors with male contacts - Product standard

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 004: Connectors with male contacts - Product standardRL]YRGSérie aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches a l'arriere, a boîtier en plastique, a verrouillage, températures d'utilisation - 55 °C a 175 °C - Partie 004 : Connecteurs a contacts mâles - Norme de produitLuft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere Abdichtung, Plastikgehäuse, Verriegelungssystem, Betriebstemperaturen von - 55 °C bis 175 °C - Teil 004: Steckverbinder mit Stiftkontakten - ProduktnormTa slovenski standard je istoveten z:EN 3545-004:2005SIST EN 3545-004:2006en49.060ICS:SLOVENSKI
STANDARDSIST EN 3545-004:200601-julij-2006







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3545-004
November 2005 ICS 49.060 English Version
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C -Part 004: Connectors with male contacts - Product standard
Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 °C à 175 °C - Partie 004 : Connecteurs à contacts mâles - Norme de produit
Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere Abdichtung, Plastikgehäuse, Verriegelungssystem, Betriebstemperaturen von -55 °C bis 175 °C - Teil 004: Steckverbinder mit Stiftkontakte - Produktnorm This European Standard was approved by CEN on 26 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3545-004:2005: E



EN 3545-004:2005 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Required characteristics.4 5 Designation.8 6 Delivery conditions.8 7 Marking.9 8 Technical specification.9



EN 3545-004:2005 (E) 3 Foreword This European Standard (EN 3545-004:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the latest by May 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den
...