Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance (IEC 60793-1-1:2022)

This part of IEC 60793 lists and gives guidance on the use of documents giving uniform
requirements for measuring and testing optical fibres, thereby assisting in the inspection of
fibres and cables for commercial (mostly telecommunications) purposes.
The individual measurement and test methods are contained in the different parts of the
IEC 60793 series. They are identified as IEC 60793-1-X, where "X" is an assigned sub-part
number, indicating its affiliation to the IEC 60793-1 series.
In general, measurements and tests methods apply to all class A multimode fibres and class B
and class C single-mode optical fibres covered by the IEC 60793-2 series relating to product
specifications, although there can be exceptions. Clause 1 of each part of the IEC 60793 series
contains the scope for each particular attribute.

Lichtwellenleiter - Teil 1-1: Messmethoden und Prüfverfahren - Allgemeines und Leitfaden (IEC 60793-1-1:2022)

Fibres optiques - Partie 1-1: Méthodes de mesure et procédures d'essai - Généralités et recommandations (IEC 60793-1-1:2022)

IEC 60793-1-1:2022 est disponible sous forme de IEC 60793-1-1:2022 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

Optična vlakna - 1-1. del: Merilne metode in postopki preskušanja - Splošno in navodila (IEC 60793-1-1:2022)

Ta del standarda IEC 60793 navaja dokumente, ki podajajo enotne zahteve za merjenje in preskušanje optičnih vlaken, ter podaja navodila o njihovi uporabi, s čimer je v pomoč pri pregledovanju vlaken in kablov za komercialne (večinoma telekomunikacijske) namene.
Posamezne merilne in preskusne metode so navedene v različnih delih skupine standardov IEC 60793. Ti so označeni kot IEC 60793-1-X, pri čemer je »X« dodeljena številka poddela, ki označuje njegovo zvezo s skupino standardov IEC 60793-1.
Na splošno se merilne in preskusne metode uporabljajo za vsa večrodna vlakna razreda A ter enorodna optična vlakna razreda B in C, ki so zajeta v skupini standardov IEC 60793-2 v zvezi s specifikacijami izdelkov, čeprav lahko obstajajo izjeme. Točka 1 vsakega dela skupine standardov IEC 60793 vsebuje področje uporabe za posamezen atribut.

General Information

Status
Published
Public Enquiry End Date
31-Mar-2022
Publication Date
04-Sep-2022
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
23-Aug-2022
Due Date
28-Oct-2022
Completion Date
05-Sep-2022

Relations

Buy Standard

Standard
EN IEC 60793-1-1:2022
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN IEC 60793-1-1:2022 - BARVE
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60793-1-1:2022
01-oktober-2022
Nadomešča:
SIST EN 60793-1-1:2017
Optična vlakna - 1-1. del: Merilne metode in postopki preskušanja - Splošno in
navodila (IEC 60793-1-1:2022)
Optical fibres - Part 1-1: Measurement methods and test procedures - General and
guidance (IEC 60793-1-1:2022)
Lichtwellenleiter - Teil 1-1: Messmethoden und Prüfverfahren - Allgemeines und
Leitfaden (IEC 60793-1-1:2022)
Fibres optiques - Partie 1-1: Méthodes de mesure et procédures d'essai - Généralités et
recommandations (IEC 60793-1-1:2022)
Ta slovenski standard je istoveten z: EN IEC 60793-1-1:2022
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
SIST EN IEC 60793-1-1:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60793-1-1:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 60793-1-1:2022


EUROPEAN STANDARD EN IEC 60793-1-1

NORME EUROPÉENNE

EUROPÄISCHE NORM August 2022
ICS 33.180.10 Supersedes EN 60793-1-1:2017
English Version
Optical fibres - Part 1-1: Measurement methods and test
procedures - General and guidance
(IEC 60793-1-1:2022)
Fibres optiques - Partie 1-1: Méthodes de mesure et Lichtwellenleiter - Teil 1-1: Messmethoden und
procédures d'essai - Généralités et recommandations Prüfverfahren - Allgemeines und Leitfaden
(IEC 60793-1-1:2022) (IEC 60793-1-1:2022)
This European Standard was approved by CENELEC on 2022-07-25. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60793-1-1:2022 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60793-1-1:2022
EN IEC 60793-1-1:2022 (E)
European foreword
The text of document 86A/2166/CDV, future edition 5 of IEC 60793-1-1, prepared by SC 86A "Fibres
and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60793-1-1:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-04-25
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-07-25
document have to be withdrawn
This document supersedes EN 60793-1-1:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60793-1-1:2022 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60793-2 (series) NOTE Harmonized as EN 60793-2 (series)
ISO 80000-1:2009 NOTE Harmonized as EN ISO 80000-1:2013 (not modified)
2

---------------------- Page: 4 ----------------------
SIST EN IEC 60793-1-1:2022
EN IEC 60793-1-1:2022 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60793-1-20 - Optical fibres - Part 1-20: Measurement EN 60793-1-20 -
methods and test procedures - Fibre
geometry
IEC 60793-1-21 - Optical fibres - Part 1-21: Measurement EN 60793-1-21 -
methods and test procedures - Coating
geometry
IEC 60793-1-22 - Optical fibres - Part 1-22: Measurement EN 60793-1-22 -
methods and test procedures - Length
measurement
IEC 60793-1-30 - Optical fibres - Part 1-30: Measurement EN 60793-1-30 -
methods and test procedures - Fibre proof
test
IEC 60793-1-31 - Optical fibres - Part 1-31: Measurement EN IEC 60793-1-31 -
methods and test procedures - Tensile
strength
IEC 60793-1-32 - Optical fibres - Part 1-32: Measurement EN IEC 60793-1-32 -
methods and test procedures - Coating
strippability
IEC 60793-1-33 - Optical fibres - Part 1-33: Measurement EN 60793-1-33 -
methods and test procedures - Stress
corrosion susceptibility
IEC 60793-1-34 - Optical fibres - Part 1-34: Measurement EN IEC 60793-1-34 -
methods and test procedures - Fibre curl
IEC 60793-1-40 - Optical fibres - Part 1-40: Attenuation EN IEC 60793-1-40 -
measurement methods
IEC 60793-1-41 - Optical fibres - Part 1-41: Measurement EN 60793-1-41 -
methods and test procedures - Bandwidth
IEC 60793-1-42 - Optical fibres - Part 1-42: Measurement EN 60793-1-42 -
methods and test procedures - Chromatic
dispersion
3

---------------------- Page: 5 ----------------------
SIST EN IEC 60793-1-1:2022
EN IEC 60793-1-1:2022 (E)
Publication Year Title EN/HD Year
IEC 60793-1-43 - Optical fibres - Part 1-43: Measurement EN 60793-1-43 -
methods and test procedures - Numerical
aperture measurement
IEC 60793-1-44 - Optical fibres - Part 1-44: Measurement EN 60793-1-44 -
methods and test procedures - Cut-off
wavelength
IEC 60793-1-45 - Optical fibres - Part 1-45: Measurement EN IEC 60793-1-45 -
methods and test procedures - Mode field
diameter
IEC 60793-1-46 - Optical fibres - Part 1-46: Measurement EN 60793-1-46 -
methods and test procedures - Monitoring
of changes in optical transmittance
IEC 60793-1-47 - Optical fibres - Part 1-47: Measurement EN IEC 60793-1-47 -
methods and test procedures -
Macrobending loss
IEC 60793-1-48 - Optical fibres - Part 1-48: Measurement EN 60793-1-48 -
methods and test procedures - Polarization
mode dispersion
IEC 60793-1-49 - Optical fibres - Part 1-49: Measurement EN IEC 60793-1-49 -
methods and test procedures - Differential
mode delay
IEC 60793-1-50 - Optical fibres - Part 1-50: Measurement EN 60793-1-50 -
methods and test procedures - Damp heat
(steady state) tests
IEC 60793-1-51 - Optical fibres - Part 1-51: Measurement EN 60793-1-51 -
methods and test procedures - Dry heat
(steady state) tests
IEC 60793-1-52 - Optical fibres - Part 1-52: Measurement EN 60793-1-52 -
methods and test procedures - Change of
temperature tests
IEC 60793-1-53 - Optical fibres - Part 1-53: Measurement EN 60793-1-53 -
methods and test procedures - Water
immersion tests
IEC 60793-1-54 - Optical fibres - Part 1-54: Measurement EN IEC 60793-1-54 -
methods and test procedures - Gamma
irradiation
IEC 60793-1-60 - Optical fibres - Part 1-60: Measurement EN 60793-1-60 -
methods and test procedures - Beat length
IEC 60793-1-61 - Optical fibres - Part 1-61: Measurement EN 60793-1-61 -
methods and test procedures - Polarization
crosstalk
IEC 60793-2 - Optical fibres - Part 2: Product EN IEC 60793-2 -
specifications - General

4

---------------------- Page: 6 ----------------------
SIST EN IEC 60793-1-1:2022



IEC 60793-1-1

®


Edition 5.0 2022-06




INTERNATIONAL



STANDARD



















Optical fibres –

Part 1-1: Measurement methods and test procedures – General and guidance



























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 33.180.10 ISBN 978-2-8322-3890-5



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------
SIST EN IEC 60793-1-1:2022
– 2 – IEC 60793-1-1:2022 © IEC 2022
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Rounding rules . 8
5 Measurement and test categories . 8
6 Standard atmospheric measurement and test conditions . 9
7 Calibration guidance . 10
8 Reference test methods . 10
9 Categories of optical fibres . 10
10 Packaging and documentation . 10
10.1 Packaging . 10
10.2 Documentation . 10
Bibliography . 11

Table 1 – Standard range of atmospheric conditions . 9

---------------------- Page: 8 ----------------------
SIST EN IEC 60793-1-1:2022
IEC 60793-1-1:2022 © IEC 2022 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

OPTICAL FIBRES –

Part 1-1: Measurement methods and test procedures –
General and guidance

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks o
...

SLOVENSKI STANDARD
oSIST prEN IEC 60793-1-1:2022
01-marec-2022
Optična vlakna - 1-1. del: Metode merjenja in preskusni postopki - Splošno in
navodila
Optical fibres - Part 1-1: Measurement methods and test procedures - General and
guidance
Lichtwellenleiter - Teil 1-1: Messmethoden und Prüfverfahren - Allgemeines und
Leitfaden
Fibres optiques - Partie 1-1: Méthodes de mesure et procédures d'essai - Généralités et
recommandations
Ta slovenski standard je istoveten z: prEN IEC 60793-1-1:2022
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
oSIST prEN IEC 60793-1-1:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60793-1-1:2022

---------------------- Page: 2 ----------------------
oSIST prEN IEC 60793-1-1:2022
86A/2166/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60793-1-1 ED5
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-01-21 2022-04-15
SUPERSEDES DOCUMENTS:
86A/2106/CD, 86A/2150/CC

IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance

PROPOSED STABILITY DATE: 2026

NOTE FROM TC/SC OFFICERS:


Copyright © 2021 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 60793-1-1:2022
IEC CDV 60793-1-1/Ed5 © IEC 2022 – 2 – 86A/2166/CD
1 CONTENTS
2 CONTENTS . 2
3 FOREWORD . 3
4 INTRODUCTION . 5
5 1 Scope . 6
6 2 Normative references . 6
7 3 Terms and definitions . 7
8 4 Rounding rules . 8
9 5 Measurement and test categories . 8
10 6 Standard atmospheric measurement and test conditions . 9
11 7 Calibration guidance . 9
12 8 Reference test methods . 9
13 9 Categories of optical fibres . 9
14 10 Packaging and Documentation . 10
15 Bibliography . 10
16
17 Table 1 – Standard range of atmospheric conditions . 9
18
19

---------------------- Page: 4 ----------------------
oSIST prEN IEC 60793-1-1:2022
IEC CDV 60793-1-1/Ed5 © IEC 2022 – 3 – 86A/2166/CD
20 INTERNATIONAL ELECTROTECHNICAL COMMISSION
21 ____________
22
23 OPTICAL FIBRES –
24
25 Part 1-1: Measurement methods and test procedures –
26 General and guidance
27
28 FOREWORD
29 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
30 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
31 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
32 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
33 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
34 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
35 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
36 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
37 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
38 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
39 consensus of opinion on the relevant subjects since each technical committee has representation from all
40 interested IEC National Committees.
41 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
42 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
43 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
44 misinterpretation by any end user.
45 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
46 transparently to the maximum extent possible in their national and regional publications. Any divergence between
47 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
48 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
49 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
50 services carried out by independent certification bodies.
51 6) All users should ensure that they have the latest edition of this publication.
52 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
53 members of its technical committees and IEC National Committees for any personal injury, property damage or
54 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
55 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
56 Publications.
57 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
58 indispensable for the correct application of this publication.
59 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
60 rights. IEC shall not be held responsible for identifying any or all such patent rights.
61 International Standard IEC 60793-1-1 has been prepared by subcommittee 86A: Fibres and
62 cables, of IEC technical committee 86: Fibre optics.
63 This fifth edition cancels and replaces the fourth edition published in 2017. This edition
64 constitutes a technical revision.
65 This edition includes the following significant technical changes with respect to the previous
66 edition:
67 a) changes in normative references;
68 b) renamed clause 10 and addition of documentation related requirements in a new sub-clause
69 10.2
70
71

---------------------- Page: 5 ----------------------
oSIST prEN IEC 60793-1-1:2022
IEC CDV 60793-1-1/Ed5 © IEC 2022 – 4 – 86A/2166/CD
72 The text of this International Standard is based on the following documents:
CDV Report on voting
86A/xxxx/CDV 86A/xxxx/RVC
73
74 Full information on the voting for the approval of this International Standard can be found in the
75 report on voting indicated in the above table.
76 This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
77 A list of all parts in the IEC 60793 series, published under the general title Optical fibres, can
78 be found on the IEC website.
79 The committee has decided that the contents of this document will remain unchanged until the
80 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
81 the specific document. At this date, the document will be
82 • reconfirmed,
83 • withdrawn,
84 • replaced by a revised edition, or
85 • amended.
86
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates that it
contains colours which are considered to be useful for the correct understanding of its
contents. Users should therefore print this document using a colour printer.
87
88

---------------------- Page: 6 ----------------------
oSIST prEN IEC 60793-1-1:2022
IEC CDV 60793-1-1/Ed5 © IEC 2022 – 5 – 86A/2166/CD
89 INTRODUCTION
90 Publications in the IEC 60793-1 series concern measurement methods and test procedures as
91 they apply to optical fibres.
92 Within the same series, several different areas are grouped, as follows:
93 Parts 1-10 to 1-19: General
94 Parts 1-20 to 1-29: Measurement methods and test procedures for dimensions
95 Parts 1-30 to 1-39: Measurement methods and test procedures for mechanical
96 characteristics
97 Parts 1-40 to 1-49: Measurement methods and test procedures for transmission and optical
98 characteristics
99 Parts 1-50 to 1-59: Measurement methods and test procedures for environmental
100 characteristics
101 Parts 1-60 to 1-69: Measurement methods and test procedures for polarization-maintaining
102 fibres.
103

---------------------- Page: 7 ----------------------
oSIST prEN IEC 60793-1-1:2022
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.