oSIST prEN ISO 16906:2024

Resilient floor coverings - Determination of seam strength (ISO 16906:2015)

This International Standard specifies a method for determining the strength of the seams of resilient
floor coverings when welded in accordance with the manufacturer’s instructions.

Elastische Bodenbeläge - Bestimmung der Nahtfestigkeit (ISO 16906:2015)

Revêtements de sol résilients - Détermination de la résistance de la soudure (ISO 16906:2015)

La présente Norme internationale spécifie une méthode pour déterminer la résistance des soudures des revêtements de sol résilients lorsqu’ils sont soudés conformément aux instructions du fabricant.

Netekstilne talne obloge - Ugotavljanje trdnosti šiva (ISO 16906:2015)

General Information

• Status: Not Published
• Public Enquiry End Date: 25-Sep-2024
• ICS: 97.150 - Floor coverings
• Technical Committee: ITEK - Textile and textile products
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 11-Jul-2024
• Due Date: 28-Nov-2024
• Completion Date: 30-Sep-2024
• Ref Project: EN ISO 16906:2024 - Resilient floor coverings - Determination of seam strength (ISO 16906:2015)

Relations

• Revises: SIST EN 684:1999 - Resilient floor coverings - Determination of seam strength
• Effective Date: 01-May-2024

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Netekstilne talne obloge - Ugotavljanje trdnosti šiva (ISO 16906:2015)
Resilient floor coverings - Determination of seam strength (ISO 16906:2015)
Elastische Bodenbeläge - Bestimmung der Nahtfestigkeit (ISO 16906:2015)
Revêtements de sol résilients - Détermination de la résistance de la soudure (ISO
16906:2015)
Ta slovenski standard je istoveten z: prEN ISO 16906
ICS:
97.150 Talne obloge Floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL ISO
STANDARD 16906
First edition
2015-05-15
Resilient floor coverings —
Determination of seam strength
Revêtements de sol résilients — Détermination de la résistance de la
soudure
Reference number
ISO 16906:2015(E)
©
ISO 2015
ISO 16906:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

ISO 16906:2015(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Terms and definitions . 1
3 Principle . 1
4 Apparatus . 1
5 Sampling and preparation of test pieces . 2
5.1 Sampling . 2
5.2 Preparation of test pieces . 2
6 Conditioning . 2
7 Procedure. 2
8 Calculation an expression of results . 3
9 Test report . 3
ISO 16906:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International
...