SIST EN 13501-2:2008+A1:2009
(Main)Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
This European Standard specifies the procedure for classification of construction products and building elements using data from fire resistance and smoke leakage tests which are within the direct field of application of the relevant test method. Classification on the basis of extended application of test results is also included in the scope of this European Standard.
This European Standard deals with:
a) loadbearing elements without a fire separating function:
walls;
floors;
roofs;
beams;
columns;
balconies;
walkways;
stairs.
b) loadbearing elements with a fire separating function, with or without glazing, services and fixtures:
walls;
floors;
roofs;
raised floors.
c) products and systems for protecting elements or parts of the works
ceilings with no independent fire resistance;
fire protective coatings, claddings and screens;
d) non-loadbearing elements or parts of works, with or without glazing, services and fixtures:
partitions;
facades (curtain walls) and external walls;
ceilings with independent fire resistance;
fire doors and shutters and their closing devices;
smoke control doors;
conveyor systems and their closures;
penetration seals;
linear joint seals;
service ducts and shafts;
chimneys.
e) wall and ceiling coverings with fire protection ability.
f) lift landing doors which are tested according to EN 81-58 are excluded from this European Standard. Lift landing doors which are tested according to EN 1634-1 are classified in accordance with 7.5.5.
Relevant test methods which have been prepared for these elements are listed in Clauses 2 and 7.
Klassifizierung von Bauprodukten und Bauarten zu ihrem Brandverhalten - Teil 2: Klassifizierung mit den Ergebnissen aus den Feuerwiderstandsprüfungen, mit Ausnahme von Lüftungsanlagen
Diese Europäische Norm spezifiziert das Verfahren zur Klassifizierung von Bauprodukten und Bauteilen anhand der Ergebnisse von Feuerwiderstandsprüfungen und Prüfungen zur Rauchdichtheit entsprechend dem direkten Anwendungsbereich der zugehörigen Prüfverfahren. !Die Klassifizierung auf der Basis des erweiterten Anwendungsbereichs von Versuchsergebnissen wird ebenfalls in dieser Europäischen Norm behandelt."
In dieser Europäischen Norm werden behandelt:
a) tragende Bauteile ohne raumabschließende Funktion:
Wände;
Decken;
Dächer;
Balken;
Stützen;
Balkone;
Laubengänge;
Treppen;
b) tragende Bauteile mit raumabschließender Funktion, mit oder ohne Verglasung, haustechnischer Anlagen und Befestigungen:
Wände;
Decken;
Dächer;
Doppelböden;
c) Produkte und Systeme zum Schutz von Bauteilen oder Teilen von Bauwerken:
Unterdecken ohne eigener Feuerwiderstandsfähigkeit;
Brandschutzbeschichtungen, Bekleidungen und Abschirmungen;
d) nichttragende Bauteile oder Teile von Bauwerken, mit oder ohne Verglasung, haustechnischer Anlagen und Befestigungen:
Trennwände;
Vorhangfassaden und Außenwände;
Unterdecken mit eigener Feuerwiderstandsfähigkeit;
Feuerschutztüren und Abschlüsse und ihre Schließvorrichtungen;
Rauchschutztüren;
Förderanlagen und ihre Abschlüsse;
Abschottungen von Durchführungen;
Bauteilfugen;
Installationskanäle und -schächte;
Abgasanlagen;
e) brandschutztechnisch wirksame Bekleidungen von Wänden und Decken;
f) Fahrschachttüren, die nach EN 81-58 geprüft wurden, sind nicht Bestandteil dieser Europäischen Norm. Fahrschachttüren, die nach EN 1634-1 geprüft wurden, werden nach 7.5.5 klassifiziert.
Die jeweils geltenden Prüfverfahren, die für diese Produkte aufgestellt worden sind, sind in den Abschnitten 2 und 7 aufgelistet.
Classement au feu des produits et éléments de construction - Partie 2: Classement à partir des données d'essais de résistance au feu à l'exclusion des produits utilisés dans les systèmes de ventilation
Požarna klasifikacija gradbenih proizvodov in elementov stavb - 2. del: Klasifikacija na podlagi podatkov iz preskusov požarne odpornosti, razen za prezračevalne naprave
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Klassifizierung von Bauprodukten und Bauarten zu ihrem Brandverhalten - Teil 2: Klassifizierung mit den Ergebnissen aus den Feuerwiderstandsprüfungen, mit Ausnahme von LüftungsanlagenClassement au feu des produits et éléments de construction - Partie 2: Classement à partir des données d'essais de résistance au feu à l'exclusion des produits utilisés dans les systèmes de ventilationFire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services13.220.50Požarna odpornost gradbenih materialov in elementovFire-resistance of building materials and elementsICS:Ta slovenski standard je istoveten z:EN 13501-2:2007+A1:2009SIST EN 13501-2:2008+A1:2009en,fr,de01-december-2009SIST EN 13501-2:2008+A1:2009SLOVENSKI
STANDARD
SIST EN 13501-2:2008+A1:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13501-2:2007+A1
September 2009 ICS 13.220.50 Supersedes EN 13501-2:2007English Version
Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
Classement au feu des produits et éléments de construction - Partie 2: Classement à partir des données d'essais de résistance au feu à l'exclusion des produits utilisés dans les systèmes de ventilation
Klassifizierung von Bauprodukten und Bauarten zu ihrem Brandverhalten - Teil 2: Klassifizierung mit den Ergebnissen aus den Feuerwiderstandsprüfungen, mit Ausnahme von Lüftungsanlagen This European Standard was approved by CEN on 30 November 2006 and includes Amendment 1 approved by CEN on 17 July 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13501-2:2007+A1:2009: ESIST EN 13501-2:2008+A1:2009
EN 13501-2:2007+A1:2009 (E) 2 Contents Page Foreword . 4Introduction . 51Scope. 62Normative references . 73Terms and definitions . 94Fire scenarios . 134.1General . 134.2The standard temperature/time curve (post flash-over fire) . 134.3The slow heating curve (smouldering fire). 144.4The ‘semi-natural’ fire . 144.5The external fire exposure curve . 144.6Constant temperature attack . 155Resistance to fire performance characteristics . 155.1General . 155.2Performance characteristics . 155.2.1R - Loadbearing capacity . 155.2.2E - Integrity . 165.2.3I - Thermal insulation . 165.2.4W - Radiation . 185.2.5M - Mechanical action . 185.2.6C - Self-closing . 195.2.7S - Smoke leakage . 195.2.8G - ‘Soot fire’ resistance . 195.2.9K - Fire protection ability . 196Declaration of fire resistance performance . 206.1Classification periods . 206.2Designatory letters . 206.3Declaration of performance . 206.4Combinations of classes . 216.5Particular classifications . 216.5.1Fire doors and shutters . 216.5.2Conveyor systems and their closures . 226.6Additional performance parameters . 226.6.1Optional performance parameters . 226.6.2Expansion of performance parameters . 226.6.3Particular performance parameters . 236.7Presentation of classification . 236.8Declaration of fire resistance classes in product specifications . 237Classification procedure for fire resistance . 237.1General . 237.1.1Procedure . 237.1.2General rules for deducing the number of standard temperature/time fire resistance tests . 257.1.3!Field of application" . 267.2Classification of loadbearing elements without a fire separating function . 277.2.1General . 277.2.2Classification of loadbearing walls without separating function . 277.2.3Classification of loadbearing floors and roofs without fire separating function . 28SIST EN 13501-2:2008+A1:2009
EN 13501-2:2007+A1:2009 (E) 3 7.2.4Classification of beams . 297.2.5Classification of columns . 307.2.6Classification of balconies, walkways and stairs . 317.3Classification of loadbearing elements with fire separating function . 327.3.1General . 327.3.2Classification of loadbearing walls with fire separating function . 327.3.3Classification of loadbearing floors and roofs with fire separating function . 347.3.4Classification of raised floors . 357.4Products and systems for protecting elements or parts of works . 367.4.1General . 367.4.2Tests to be carried out. 377.4.3Test methods . 387.4.4Performance criteria . 387.4.5Classes . 387.4.6Classification of protected structural members . 387.5Classification of non-loadbearing elements . 417.5.1General . 417.5.2Partitions . 427.5.3Classification of curtain walling . 437.5.4Classification of ceilings with independent fire resistance. 457.5.5Classification of fire doors and shutters including their closing devices . 477.5.6Classification of smoke control doors . 487.5.7Classification of closure and conveyor system assemblies . 507.5.8Classification of penetration seals . 517.5.9Classification of linear joint seals . 537.5.10Classification of service ducts and shafts . 557.5.11Classification of chimneys . 577.6Classification of wall and ceiling coverings for fire protection ability . 577.6.1General . 577.6.2Test method . 587.6.3Tests to be carried out. 587.6.4Performance criteria for fire protection ability . 587.6.5Classes . 59Annex A (normative)
Classification report . 60A.1General . 60A.2Content and format . 60A.3Classification report format . 62Annex B (informative)
Presentation of characterisation data and their field of application for products and systems for protecting elements or parts of work . 66B.1General . 66B.2Characterisation data for protective vertical membranes . 66B.3Characterisation data for applied protection to concrete members . 67B.4Characterisation data for applied protection to steelwork . 68B.5Characterisation data for applied protection to concrete/profiled sheet steel composite members . 70B.6Characterisation data for applied protection to concrete filled hollow steel columns . 71B.7Characterisation data for applied protection to timber members . 72Bibliography . 80 SIST EN 13501-2:2008+A1:2009
EN 13501-2:2007+A1:2009 (E) 4 Foreword This document (EN 13501-2:2007+A1:2009) has been prepared by Technical Committee CEN/TC 127 “Fire safety in buildings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at the latest by March 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document includes Amendment 1, approved by CEN on 2009-07-17. This document supersedes !EN 13501-2:2007". The start and finish of text introduced or altered by amendment is indicated in the text by tags!"The first edition of this European Standard was prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, supporting essential requirements of the Construction Products Directive. !Amendment 1 provides for the use of extended application reports in the classification procedure." CEN, CENELEC and EOTA committees preparing technical specifications which contain performance requirements against resistance to fire tests should make reference to the resistance to fire classification given in this European Standard and not refer directly to any specific fire test method. Changes have been made in this revision to bring it in line with the relevant current EC Decisions on fire resistance classification, and experience in use in the first edition. EN 13501 Fire classification of construction products and building elements consists of the following Parts: Part 1: Classification using data from reaction to fire tests Part 2: Classification using data from fire resistance tests, excluding ventilation services Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers Part 4: Classification using data from fire resistance tests on components of smoke control systems Part 5: Classification using data from external fire exposure to roof tests According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 13501-2:2008+A1:2009
EN 13501-2:2007+A1:2009 (E) 5 Introduction The aim of this European Standard is to define a harmonised procedure for the classification for resistance to fire of construction products and building elements. This classification is based on the test procedures listed in !Clause 2 and the relevant field of application procedures". This European Standard is prepared in support of the second essential requirement in the EC Construction Products Directive (89/106/EEC) which is detailed in the Interpretative Document number 2 (ID2): Safety in case of fire (OJ C62 Vol 37). It reflects the Commission Decision of 3 May 2000 on the implementation of the Council Directive 89/106/EEC as regards the classification of the resistance to fire performance of construction products, construction works and parts thereof. The Interpretative Document and the Commission Decision of 2 May 2000 specify performance and classes regarding fire resistance. These classes are identified by designation letters, each of which refers to an important characteristic of fire resistance behaviour. This European Standard provides for a common understanding for these requirements. It interprets the functional requirements for the different groups of building elements and explains the method for deriving their classification on the basis of !test results and/or extended application results for individual elements". !NOTE Test reports constitute the basis for extended application reports as explained in prEN 15725." SIST EN 13501-2:2008+A1:2009
EN 13501-2:2007+A1:2009 (E) 6 1 Scope This European Standard specifies the procedure for classification of construction products and building elements using data from fire resistance and smoke leakage tests which are within the direct field of application of the relevant test method. !Classification on the basis of extended application of test results is also included in the scope of this European Standard." This European Standard deals with: a) loadbearing elements without a fire separating function:
walls; floors; roofs; beams; columns; balconies; walkways; stairs. b) loadbearing elements with a fire separating function, with or without glazing, services and fixtures:
walls; floors; roofs; raised floors. c) products and systems for protecting elements or parts of the works
ceilings with no independent fire resistance; fire protective coatings, claddings and screens; d) non-loadbearing elements or parts of works, with or without glazing, services and fixtures:
partitions; facades (curtain walls) and external walls; ceilings with independent fire resistance; fire doors and shutters and their closing devices; smoke control doors; conveyor systems and their closures; penetration seals; linear joint seals; service ducts and shafts; chimneys. e) wall and ceiling coverings with fire protection ability. f) lift landing doors which are tested according to EN 81-58 are excluded from this European Standard. Lift landing doors which are tested according to EN 1634-1 are classified in accordance with 7.5.5. Relevant test methods which have been prepared for these elements are listed in Clauses 2 and 7. SIST EN 13501-2:2008+A1:2009
EN 13501-2:2007+A1:2009 (E) 7 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1363-2, Fire resistance tests — Part 2: Alternative and additional procedures EN 1364-1, Fire resistance tests for non-loadbearing elements — Part 1: Walls EN 1364-2, Fire resistance tests for non-loadbearing elements — Part 2: Ceilings EN 1364-3, Fire resistance tests for non-loadbearing elements — Part 3: Curtain walling
- Full configuration (complete assembly) EN 1364-4, Fire resistance tests for non-loadbearing elements — Part 4: Curtain walling — Part configuration EN 1365-1, Fire resistance tests for loadbearing elements — Part 1: Walls EN 1365-2, Fire resistance tests for loadbearing elements — Part 2: Floors and roofs EN 1365-3, Fire resistance tests for loadbearing elements — Part 3: Beams EN 1365-4, Fire resistance tests for loadbearing elements — Part 4: Columns EN 1365-5, Fire resistance tests for loadbearing elements — Part 5: Balconies and walkways EN 1365-6, Fire resistance tests for loadbearing elements — Part 6: Stairs EN 1366-3, Fire resistance tests for service installations — Part 3: Penetration seals EN 1366-4, Fire resistance tests for service installations — Part 4: Linear joint seals EN 1366-5, Fire resistance tests for service installations — Part 5: Service ducts and shafts EN 1366-6, Fire resistance tests for service installations — Part 6: Raised access and hollow core floors EN 1366-7, Fire resistance tests for service installations — Part 7: Conveyor systems and their closures EN 1634-1, Fire resistance tests for door and shutter assemblies — Part 1: Fire doors and shutters EN 1634-3, Fire resistance tests for door and shutter assemblies — Part 3: Smoke control doors and shutters EN 13216-1, Chimneys — Test methods for system chimneys — Part 1: General test methods CEN/TS 13381-1, Test methods for determining the contribution to the fire resistance of structural members — Part 1: Horizontal protective membranes ENV 13381-2, Test methods for determining the contribution to the fire resistance of structural members — Part 2: Vertical protective membranes ENV 13381-3, Test methods for determining the contribution to the fire resistance of structural members — Part 3: Applied protection to concrete members SIST EN 13501-2:2008+A1:2009
EN 13501-2:2007+A1:2009 (E) 8 ENV 13381-4, Test methods for determining the contribution to the fire resistance of structural members — Part 4: Applied protection to steel members ENV 13381-5, Test methods for determining the contribution to the fire resistance of structural members — Part 5: Applied protection to concrete/profiled sheet steel composite members ENV 13381-6, Test methods for determining the contribution to the fire resistance of structural members — Part 6: Applied protection to concrete filled hollow steel columns ENV 13381-7, Test methods for determining the contribution to the fire resistance of structural members — Part 7: Applied protection to timber members EN 14135, Coverings — Determination of fire protection ability EN 14600, Doorsets and openable windows with fire resisting and/or smoke control characteristics — Requirements and classification !EN 15080-8, Extended application of results from fire resistance tests — Part 8: Beams EN 15254-2, Extended application of results from fire resistance tests — Non-loadbearing walls — Part 2: Masonry and gypsum blocks prEN 15254-5, Extended application of results from fire resistance tests — Non-loadbearing walls — Part 5: Metal sandwich panel construction prEN 15254-61), Extended application of results from fire resistance tests — Non-loadbearing walls — Part 6: Curtain walling prEN 15254-7, Extended application of results from fire resistance tests — Non-loadbearing walls — Part 7: Non-loadbearing sandwich panels — Ceilings prEN 15269-1, Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware — Part 1: General requirements prEN 15269-2, Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware — Part 2: Fire resistance of hinged and pivoted steel doorsets prEN 15269-3, Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware — Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows prEN 15269-41), Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware — Part 4: Fire resistance of hinged and pivoted glass doorsets prEN 15269-51), Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware — Part 5: Fire resistance of hinged and pivoted, metal framed, glazed doorsets and openable windows prEN 15269-61), Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware — Part 6: Fire resistance of sliding timber doorsets
1) !To be published." SIST EN 13501-2:2008+A1:2009
EN 13501-2:2007+A1:2009 (E) 9 prEN 15269-7, Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware — Part 7: Fire resistance of sliding steel doorsets prEN 15269-81), Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware — Part 8: Fire resistance of horizontally folding timber doorsets prEN 15269-91), Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware — Part 9: Fire resistance of horizontally folding steel doorsets prEN 15269-101), Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware — Part 10: Fire resistance of steel rolling shutters prEN 15269-111), Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware — Part 11: Fire resistance of fabric curtains prEN 15269-20, Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware — Part 20: Smoke control for hinged and pivoted steel, timber and metal framed glazed doorsets prEN 15725, Extended application reports on the fire performance of construction products and building elements prEN 15882-1, Extended application of results from fire resistance tests for service installations — Part 1: Fire resisting ducts prEN 15882-2, Extended application of results from fire resistance tests for service installations — Part 2: Dampers EN 15882-3, Extended application of results from fire resistance tests for service installations — Part 3: Penetration seals prEN 15882-41), Extended application of results from fire resistance tests for service installations — Part 4: Linear joint seals" EN ISO 13943:2000, Fire safety — Vocabulary (ISO 13943:2000) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 13943:2000 and the following apply. 3.1 element of building construction defined part of a construction component, e.g. wall, partition, floor, roof, beam or column
(EN 1363-1:1999). An element, for the purpose of this European Standard, covers both individual products and elements made up of
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.