SIST EN 50290-4-2:2008
(Main)Communication cables -- Part 4-2: General considerations for the use of cables - Guide to use
Communication cables -- Part 4-2: General considerations for the use of cables - Guide to use
The scope of this European Standard is to help installers and cabling designers to understand the range of communication metallic cables available. To help this choice the fundamental and practical rules on how to use these cables are established. The related cables are specified in the documents issued by CLC/TC 46X and its sub-committees. These cables are:;telecom cables used in access network,;data communication twisted pairs cables,;coaxial cables used in CATV.
Kommunikationskabel -- Teil 4-2: Allgemeine Betrachtungen für die Anwendung der Kabel - Leitfaden für die Verwendung
Diese Europäische Norm soll Installateure und Entwicklern von Verkabelungen unterstützen, den Bereich der verfügbaren metallischen Kommunikationskabel zu verstehen. Um die Auswahl der Kabel zu erleichtern, sind die grundlegenden und praktischen Richtlinien bezüglich der Anwendung der Kabel festgelegt. Die entsprechenden Kabel sind in den Dokumenten, die vom Komitee CLC/TC 46X und seinen Unterkomitees herausgegeben werden, spezifiziert. Diese Kabel sind: – Telekommunikationskabel für das Telefonnetz, – verseilte Paare für die Datenkommunikation, – Koaxialkabel für CATV.
Câbles de communication -- Partie 4-2: Considérations générales pour l'utilisation des câbles - Guide d'utilisation
L’objet de la présente Norme Européenne est d’aider les installateurs et les concepteurs de câblage à cerner la gamme de câbles de communications métalliques disponibles. Pour aider à ce choix les règles fondamentales et pratiques sur la façon d’utiliser ces câbles sont établies. Les câbles associés sont spécifiés dans les documents publiés par le CLC/TC46X et ses sous-comités. Ces câbles sont : - les câbles de télécommunication utilisés dans les réseaux d’accès, - les câbles à paires torsadées pour la transmission de données, - câbles coaxiaux utilisés dans les réseaux câblés de télévision.
Komunikacijski kabli - 4-2. del: Splošno o uporabi kablov - Vodilo za uporabo
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Komunikacijski kabli - 4-2. del: Splošno o uporabi kablov - Vodilo za uporaboKommunikationskabel - Teil 4-2: Allgemeine Betrachtungen für die Anwendung der Kabel - Leitfaden für die VerwendungCâbles de communication - Partie 4-2: Considérations générales pour l'utilisation des câbles - Guide d'utilisationCommunication cables - Part 4-2: General considerations for the use of cables - Guide to use33.120.10Koaksialni kabli. ValovodiCoaxial cables. WaveguidesICS:Ta slovenski standard je istoveten z:EN 50290-4-2:2008SIST EN 50290-4-2:2008en,fr,de01-november-2008SIST EN 50290-4-2:2008SLOVENSKI
STANDARD
SIST EN 50290-4-2:2008
EUROPEAN STANDARD EN 50290-4-2 NORME EUROPÉENNE
EUROPÄISCHE NORM July 2008
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50290-4-2:2008 E
English version
Communication cables -
Part 4-2: General considerations for the use of cables -
Guide to use
Câbles de communication -
Partie 4-2: Considérations générales
pour l'utilisation des câbles -
Guide d'utilisation
Kommunikationskabel -
Teil 4-2: Allgemeine Betrachtungen
für die Anwendung der Kabel -
Leitfaden für die Verwendung
This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
ICS 33.120.10 SIST EN 50290-4-2:2008
EN 50290-4-2:2008 - 2 - Foreword This European Standard was prepared by the Technical Committee CENELEC TC 46X, Communication cables, with the help of the CENELEC Co-operating Partner EUROPACABLE (ECBL). The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50290-4-2 on 2008-02-01. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2009-02-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2011-02-01 __________ SIST EN 50290-4-2:2008
- 3 - EN 50290-4-2:2008 Contents 1 Scope . 5 2 Normative references . 5 3 Communication cable basics . 6 4 Types of cables . 6 4.1 Twisted pairs cables . 7 4.2 Coaxial cable (unbalanced) . 8 4.3 Flexible cables versus rigid cables . 9 5 Cables and regulations . 9 5.1 Low voltage. 10 5.2 Fire reactions and Euroclasses . 11 5.3 Electromagnetic behaviour . 10 6 Criteria for the choice of the cables . 14 6.1 Cable construction . 14 6.2 Cabling . 16 6.3 Transmission performance . 16 7 Installation practices . 18 7.1 Delivery . 18 7.2 Storage . 18 7.3 Pre-installation procedure . 19 7.4 Pulling of the cable. 20 7.5 Installation . 20 7.6 Mechanical considerations . 20 8 Cabling installation versus location . 25 8.1 Outside plant . 25 8.2 Intrabuilding . 28
Figure 1 – Balanced cabling . 6 Figure 2 – Unbalanced cabling . 6 Figure 3 – Starquads . 7 Figure 4 – Pairs . 7 Figure 5 – Example of pair arrangement in a telecommunication cable . 8 Figure 6 – Coaxial cable illustration . 8 Figure 7 – Twisted pairs cables – Screen description . 13 Figure 8 – Reel of cables . 18 Figure 9 – Reel storage . 19 Figure 10 – Advised way for pulling a cable . 20 Figure 11 – Tensile strength . 21 Figure 12 – Shrinkage and elongation of Internal and external element . 21 Figure 13 – Common handling mistakes when bending cables . 22 Figure 14 – Crush and impact testing . 23 Figure 15 – Cable stapling . 24 Figure 16 – Cable buried in a trench. 25 Figure 17 – Cable buried in a trench with a warning tape . 26 SIST EN 50290-4-2:2008
EN 50290-4-2:2008 - 4 - Figure 18 – Conduit for underground burial . 26 Figure 19 – Example of an aerial cable installation . 27 Figure 20 – Cable ‘messenger clamp/grip’. 27 Figure 21 – Examples of installation of intrabuilding conduits . 28 Figure 22 – Example of mistake in pulling cables in conduits . 30 Figure 23 – External pulling grip . 31 Figure 24 – Advised way for pulling a cable . 31 Figure 25 – Example of cable pulling when a mechanical force is required . 32
Table 1 – Types of cabling according to applications . 16 Table 2 – Cables for CATV / MATV / TV and Video distribution . 17 Table 3 – Cables for access network . 17 Table 4 – Cables that might be used for some given applications . 18
SIST EN 50290-4-2:2008
- 5 - EN 50290-4-2:2008
1 Scope The scope of this European Standard is to help installers and cabling designers to understand the range of communication metallic cables available. To help this choice the fundamental and practical rules on how to use these cables are established. The related cables are specified in the documents issued by CLC/TC 46X and its sub-committees. These cables are: - telecom cables used in access network, - data communication twisted pairs cables, - coaxial cables used in CATV.
2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 50083 series Cable networks for television signals, sound signals and interactive services EN 50117 series Coaxial cables used in cabled distribution networks EN 50173 series Information technology - Generic cabling systems EN 50174 series Information technology - Cabling installation EN 50200 Method of test for resistance to fire of unprotected small cables for use in emergency circuits EN 50288 series Multi-element metallic cables used in analogue and digital communication and control EN 50289-3-9 Communication cables - Specifications for test methods -
Part 3-9: Mechanical test methods - Bending tests EN 50289-4-16 1) Communication cables - Specifications for test methods -
Part 4-16: Environmental test methods - Circuit integrity under fire conditions EN 50290 series Communication cables EN 50406 series End user multi-pair cables used in high bit rate telecommunication networks EN 50407-1 Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables EN 50441 series Cables for indoor residential telecommunication installations
1) At draft stage. SIST EN 50290-4-2:2008
EN 50290-4-2:2008 - 6 - 3 Communication cable basics Communication cables are the highways and arteries that provide a path for telecommunications devices. There is a general tendency to say that one transmission medium is better than another. In fact, each transmission medium has its place in the design of any communication system. Each has characteristics that will make it the ideal medium to use based on a particular set of circumstances. It is important to recognize the advantages of each and develop a system accordingly. Factors to consider when choosing communication cable include: - efficiency of transmission, - cost, - ease of installation and maintenance, - availability. 4 Types of cables When working with communication cables, an installer will deal with two basic types: - balanced, - unbalanced.
Balanced cabling involve twisted-pair and/or twinaxial twisted cables that are composed of one or more pairs of copper wires (see Figure 1). Unbalanced cabling involves coaxial cable, that has only one centre conductor of either solid or stranded inner conductor and an outer concentric conductor. Most data and voice networks use twisted-pair cabling. Coaxial cable is now used primarily for CATV, satellite and video connections (see Figure 2).
Outer conductor Inner conductor
Figure 1 – Balanced cabling Figure 2 – Unbalanced cabling
SIST EN 50290-4-2:2008
- 7 - EN 50290-4-2:2008
4.1 Twisted pairs cables 4.1.1 Pair construction There are two different pairing constructions: - a pair made of two insulated wires twisted together (wire A and B in Figure 4); - a quad made of four insulated wires twisted together, providing two pairs from a star formation (first pair wire A and B and second pair wire D and C in Figure 3); - a pair made of two insulated wires twisted together; - a quad made of four insulated wires twisted together, providing two pairs. ADBC AB Figure 3 – Starquads Figure 4 – Pairs 4.1.2 Pair counts Telecommunications cable comes in many sizes, starting with a single pair of wires, up to and perhaps more than 4 200 pairs of wires. These pairs may be arranged in concentric layers or in bundles. A data communication terminal is fed normally with a maximum of 4 pairs, so the last part of the network is built with cables having 1 to 4 pairs. As the other parts of the network aggregate several terminal cables, they have a larger number of pairs. The highest number of pairs is encountered at the main communication switch. The main communication switch is then connected to global systems by satellite, fibre, radio, waveguide and coaxial (CATV). The identification of each pair in the cable is made through an appropriate colour code that is given in the relevant standard or may be agreed between customer and manufacturer (see example in Figure 5). SIST EN 50290-4-2:2008
EN 50290-4-2:2008 - 8 -
Figure 5 – Example of pair arrangement in a telecommunication cable 4.2 Coaxial cable (unbalanced) Coaxial cable is called ‘coaxial’ because it includes one conductor surrounded by a layer of insulation, itself surrounded by a concentric conductor (a metallic foil or braid or a combination of both) and an outer sheath (see Figure 6). Coaxial cable is the primary type of communication cable used by cable TV companies for signal distribution between the community antenna (CATV, normally 75 Ω) and user’s homes and businesses. The WWW is now accessible through such communication mediums making possible all types of connections. It was once the primary medium for Ethernet and other types of local area networks because of its ability to transmit high frequencies. With the development of standards for Ethernet over twisted-pair, new installations of coaxial cable for this purpose have all but disappeared. Coaxial cable is still used for connecting CCTV cameras to monitors, antenna’s and video switches. Cables for radio communication (mobile telephone) antenna’s are also coaxial, these are feeder cables and are normally 50 Ω.
Figure 6 – Coaxial cable illustration Inner conductorSIST EN 50290-4-2:2008
- 9 - EN 50290-4-2:2008 There are several variations. Triaxial (Triax) is a form of cable that uses a single centre conductor with two shields (one could be tape and one braid). This is important when considering EMC (electromagnetic compatibility). This composition affords a greater transmission distance with less loss due to interference from outside electrical signals. Twinaxial (Twinax) is two coaxial systems packaged within a single concentric outer conductor and jacket to form the cable.
4.3 Flexible cables versus rigid cables Communication infrastructure includes different sections. Some sections are installed, indoor or outdoor, permanently (i.e. fixed) so the cables are static (once installed, do not move) for their lifetime. Some other sections are subjected to continuous movement and different mechanical behaviour is required for the cable (see 7.6). Copper is inherently rigid and leads to build cables with a certain degree of stiffness suitable for permanent installations. However, copper is one of the most malleable of the rigid metals and so cannot be unsupported. Nonetheless, cable construction includes design to allow appropriate bending radius to be performed without degradation of mechanical and transmission properties. For some applications there is a need for smaller bending radius, multiple bending, or less stiffness while keeping requested transmission properties (i.e. work area cables or cables used in lift machinery). Specific designs to achieve this target use stranded conductors instead of one-solid-conductor; also with insulation material having specific mechanical properties are used. These cables, named “flexible cables”, are often used in cord assemblies and are specified for a given number of mechanical cycles.
In order to provide more flexibility to cables used in cords, stranded conductors are used instead of solid conductors. Not only does this improve flexibility but also allows the cable to be repeatedly flexed many times; this can be useful in robotic systems. The relevant cable standards identifies whether the cable is either flexible or rigid, depending on how the cable will be used in its life cycle i.e. look for properties such as simulated installation, torsion and twisting or flexing performance tests. These basic principles, along with avoiding already known stresses and misuses of installations, will ensure the cable does not irreversibly degrade below the performance criteria. There are many situations already known that will change the performance criteria below that of the specified limits. 5 Cables and regulations In addition to functional requirements cables have to meet the essential requirements of European Directives like the LVD (Low Voltage Directive) and the CPD (Construction Products Directive) and may have to contribute to the compliance of systems versus other directives like the EMCD (Electromagnetic Compatibility Directive).
EN 50290-4-1 gives the relationship between cables and main European Directives by detailing the related cable characteristics and associated tests.
SIST EN 50290-4-2:2008
EN 50290-4-2:2008 - 10 - 5.1 Low voltage Cables that are described into the documents issued by CLC/TC 46X and its sub-committees are tested for voltage withstanding. The test is performed between conductors and between the conductors or screen and the outer surface of the sheath.
When constructed in accordance with EN 50290-2-1 and submitted to spark testing, communication cables may be installed together with low voltage cable. Moreover the tests are performed after environmental and ageing tests. In addition the raw materials of these cables are defined in the EN 50290 series. This ensures sufficient stability of the cable related to this characteristic for its life cycle. Thus these cables are considered safe when: - they are used for their intended purpose and applications; - they are used under voltages and currents that do not exceed the limits given in the relevant specification.
5.2 Fire reactions and Euroclasses Cables that are permanently installed in buildings shall meet the local regulation related to the Construction Product Directive classification for fire performances (Euroclasses). Regulations as well as standards give only the minimum requirement and it is therefore always recommended to choose cable that fulfill or better exceed these requirements. This is particularly true when the requirement is safety related. The designer/installer is invited to consider the relevant regulation related to safety in case of fire. A choice of cables that strictly comply to the requirements will give greater safety margin (especially in the case where the public or individuals are involved). The product standards EN 50288, EN 50441 and EN 50117 refer to EN 50290 to describe how a cable behaves in fire. This is achieved through EN 50290-4-1 that gives the relationship between the Euroclasses and the related test methods and limits. Some local regulations/customer-requirements are stricter than the Euroclassification tables and therefore can and should be designed by discussions between the producer and customer. During a building fire, a cable that runs in a wall, up an elevator shaft, or through an air-handling plenum could become a wick that carries the flame from one floor, or one part of the building, to the next. The standards, among other things, enable engineers to calculate the time that it will take a cable to become a hazard once it is exposed. Evacuation times and building safety management can now be engineered to ensure complete safety for the occupants. SIST EN 50290-4-2:2008
- 11 - EN 50290-4-2:2008 Additionally, because the outer coverings of cables and wires are typically plastic, they can create smoke when they burn. They also describe the amount of smoke and the type of gasses a burning cable can generate. This is important because cables often run in ventilation system return spaces above ceilings or below floors.
5.3 Electromagnetic behaviour A cable's path may pass through many stray electric fields. Some of these may come from motors used in heating, ventilation, and air conditioning (HVAC). Florescent lights, radio transmitters, and power transformers may generate others. These stray fields are called ‘electromagnetic interference’ (EMI) if they originate from electrical sources and ‘radio frequency interference’ (RFI) if they come from radios, mobile phones, radars, or microwave ovens. There are electrical environments in which EMI and RFI are so strong that induced voltage in the cable affects the integrity of the transmitted signals thus additional shielding is a requirement to make communication possible. An expensive way to supply this shielding might be to route the cabling through small pipes, called conduit, and then to make sure that the conduits are grounded (to make sure that any stray fields picked up by the conduits are passed to ground and do not induce interference into the data cables). However, conduit is expensive and difficult to work with. 5.3.1 Coaxial cables The EN 50117 series that describes coaxial cables defines multiple classes of shielding effectiveness. The most commonly used, Class A, implies the use of a “foil+braid” outer conductor that would provide a sufficient immunity to the cable. The use of Class A cables gives assurance that the cabling system will work satisfactorily under normal conditions. Other shielding methods such as foil-braid-foil or foil-braid-foil-braid may also be used and higher shielding classifications may also be considered. 5.3.2 Twisted pairs cables The coupling attenuation and/or the transfer impedance that is given in the relevant cable specification describe electromagnetic behaviour of twisted pairs cables. The coupling attenuation is the resultant of twist effect and screening effect. The actual signal on the twisted pair version is applied to both the ‘a’ leg and ‘b’ leg simultaneously. However, the actual signal voltage level in each leg is opposite, 180’ out of phase, and therefore any emissions are naturally cancelled. The result is that in twisted-pairs, interference such as EMI and RFI tends to be cancelled out when the signal is reconstituted in a comparator. On an other hand, keeping the cable twisted means that both of the wires in the pair are likely to be affected equally by the interference. Installers must preserve the twist of the pairs in these cables when mating the connectors to avoid introducing performance-degrading problems. When the immunity provided by the twist is not sufficient, it is better to use cable that carries its own screening when extra shielding is needed. SIST EN 50290-4-2:2008
EN 50290-4-2:2008 - 12 - Two kinds of extra shielding may be provided: - the first is an overall foiled screen (FTP) – (F/UTP); - the second involves individually screened pairs within a cable with (SFTP) – (SF/UTP), (SSTP) or without (STP) an overall screen. EN 50174-2 well describes the mechanisms of each of the kind of twisted pair cables. A short summary for governing the choice of cables twisted pairs telecom cables would be: - use unscreened cables whenever it is possible; - use unscreened pairs cable with overall screen (FTP) if you cannot control the electromagnetic environment or to preserve your cable to be influenced by the installation conditions; - use multiple screens cables (individually screened pairs SFTP or SSTP or specific cables) in case of harsh environment and when it is required by the transmission performances. There are reasons why STP/FTP are not employed everywhere: - the shielding layers must be properly grounded in order to minimize signal degradation. If there is a difference in ground potential at different parts of the network, perhaps because problems exist with the ground system, or different areas are fed from different power sources, the shields will conduct these ground differences. These currents are called ground loops. Ground loops can become sources of interference, and they can even become shock hazards; - STP is less flexible than UTP because of the shielding and is more difficult to install. NOTE
As a rule of thumb that applies to any telecommunication cable, one may consider that the use of a closed metallic continuous pathway (EN 50174-2) is roughly equivalent to a cable screen that gives 20 dB screening effectiveness. SIST EN 50290-4-2:2008
- 13 - EN 50290-4-2:2008
Figure 7 – Twisted pairs cables – Screen description SIST EN 50290-4-2:2008
EN 50290-4-2:2008 - 14 -
6 Criteria for the choice of the cables 6.1 Cable construction
Regardless of the construction, all cables contain certain common elements that are detailed in EN 50290-2-1: - insulation to prevent short circuits between the individual conductors; - spacers (dielectric) to preserve the electrical properties of the cable; - a sheath for protection. A copper conductor in a cable can be composed of a single solid copper core or a bundle of thin strands. The advantages and disadvantages of each been discussed next. Some parts of the EN 50288 and EN 50117 series describe flexible cables manufactured with “stranded conductors”.
EN 50290-2-1 gives tools to get the cable attenuation depending upon the size of conductors and their nature (stranded or not). 6.1.1 Cable insulation/spacers Insulation is used as a high resistance material that is extruded onto the conductor to resist the flow of current between conductors. This is sometimes referred to as the dielectric/insulation. This material also impinges on the transmission properties of the cable (especially in high frequencies as detailed in EN 50290-2-1). There are several types of materials used for insulation, each having its advantages and disadvantages. Insulation materials are characterized using their loss angle (High Frequency) and their relative permitivity. For a suitable cable behaviour both of them should be low and stable. There are several primary categories of insulators: Polyvinylchloride (PVC) PVC easy to strip Flame retardant Low frequency High loss angle and high permitivity Polyethylene Flammable Halogen free High frequency Good loss angle and low permitivity Fluoropolymers High temperature applications, Flame retardant High frequency Low loss angle and low permitivity
SIST EN 50290-4-2:2008
- 15 - EN 50290-4-2:2008 The type of insulation used depends on the intended application of the cable: - EN 50290-2-23 describes suitable polyethylene; - EN 50290-2-30 describes suitable fluoropolymers; - for low frequency cables, PVC according to EN 50290-2-21 may be used. 6.1.2 Cable sheath There are several types of materials used for sheathing, each having its advantages and disadvantages: Polyvinylchloride (PVC) PVC easy to strip Flame retardant PVC allows for bright colors Can be made flexible Depending upon the detail specification resists to UV, ozone, oil and solvents Polyethylene Flammable (outdoor applications) Water proofed Depending upon the detail specification resists to UV, ozone, oil and solvents Halogen free sheathing compound Flame retardant Low smoke emission Halogen free
Depending upon the detail specification resists to UV, ozone, oil and solvents Fluoropolymers High temperature applications Flame retardant Water proofed Resists to UV, ozone, oil and solvents, acid, contaminating fluids The type of sheathing used depends on the intended application of the cable: - EN 50290-2-22 describes suitable polyvinylchloride; - EN 50290-2-24 describes suitable polyethylene; - EN 50290-2-27 describes suitable halogen free sheathing compound; - EN 50290-2-30 describes suitable fluoropolymers. 6.1.3 Armouring/additional protections Some cables are manufactured with a metallic (or non-metallic) armour to provide added strength and protection against rodents and mechanical damage, usually required when burying direct. Cable that is used in outside plant or underground, may be filled with a waterproof gel
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.