SIST EN IEC 61753-022-13:2026
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 022-13: Multimode fibre optic connectors terminated as pigtails and patchcords for category OP+ HD- Extended outdoor protected environment with additional heat dissipation (IEC 61753-022-13:2026)
Fibre optic interconnecting devices and passive components - Performance standard - Part 022-13: Multimode fibre optic connectors terminated as pigtails and patchcords for category OP+ HD- Extended outdoor protected environment with additional heat dissipation (IEC 61753-022-13:2026)
IEC 61753-022-13:2026 defines the minimum initial test and measurement requirements, and severities which multimode fibre optic connectors terminated as a pigtail or a patchcord satisfy in order to be categorized as meeting the IEC standard category OP+HP (Extended outdoor protected environment with additional heat dissipation), as defined in IEC 61753-1.
If tests are performed on the connectors terminated as pigtails or patchcords for category OP+HP, and the product pass, the product will be automatically qualified or categorized as meeting the IEC standard for categories OP+, OP, OPHD, C and CHD.
Lichtwellenleiter - Verbindungselemente und passive Bauteile – Betriebsverhalten - Teil 022-13: Lichtwellenleiter-Steckverbinder zum Anschluss an Mehrmodenfasern für die Kategorie OP+HD - Erweiterte geschützte Freiluft-Umgebung mit zusätzlicher Wärmeableitung (IEC 61753-022-13:2026)
Dispositifs d'interconnexion et composants passifs fibroniques - Norme de performance - Partie 022-13: Connecteurs à fibres optiques multimodales raccordés comme des fibres amorces et des cordons de brassage pour la catégorie OP+HD - Environnement extérieur protégé étendu avec dissipation de chaleur supplémentaire (IEC 61753-022-13:2026)
L'IEC 61753-022-13:2026 définit les exigences minimales initiales d’essai et de mesure, ainsi que les sévérités auxquelles les connecteurs à fibres optiques multimodales raccordés comme des fibres amorces ou des cordons de brassage satisfont afin d’être considérés comme satisfaisant aux critères de la catégorie OP+HD (environnement extérieur protégé étendu avec dissipation de chaleur supplémentaire) des normes IEC, telle que définie dans l’IEC 61753-1.
Si des essais sont réalisés sur les connecteurs raccordés comme des fibres amorces ou des cordons de brassage pour la catégorie OP+HD et que le produit satisfait aux exigences, le produit est automatiquement qualifié ou classé comme satisfaisant à la norme IEC pour les catégories OP+, OP, OPHD, C et CHD.
Optični spojni elementi in pasivne komponente - Tehnični standard - 022-13. del: Konektorji za mnogorodovna optična vlakna, kot repki ali povezovalne vrvice za kategorijo OP+ HD - Razširjeno zunanje zaščiteno okolje z dodatnim odvajanjem toplote (IEC 61753-022-13:2026)
General Information
- Status
- Not Published
- Public Enquiry End Date
- 07-Sep-2024
- Technical Committee
- MOC - Mobile Communications
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 09-Jun-2026
- Due Date
- 14-Aug-2026
Relations
- Effective Date
- 26-May-2026
- Refers
SIST EN 61754-15:2002 - Fibre optic connector interfaces -- Part 15: Type LSH connector family - Effective Date
- 26-May-2026
- Effective Date
- 26-May-2026
- Refers
SIST EN 61754-10:2002 - Fibre optic connector interfaces -- Part 10: Type Mini-MPO connector family - Effective Date
- 26-May-2026
- Effective Date
- 26-May-2026
- Effective Date
- 26-May-2026
- Refers
SIST EN 61754-18:2004 - Fibre optic connector interfaces -- Part 18: Type MT-RJ connector family - Effective Date
- 26-May-2026
- Effective Date
- 26-May-2026
- Effective Date
- 26-May-2026
- Refers
SIST EN 61754-6:1999/A2:2005 - Fibre optic connector interfaces -- Part 6: Type MU connector family - Effective Date
- 26-May-2026
- Effective Date
- 26-May-2026
- Effective Date
- 26-May-2026
- Effective Date
- 26-May-2026
- Refers
SIST EN 61754-22:2006 - Fibre optic connector interfaces -- Part 22: Type F-SMA connector family - Effective Date
- 26-May-2026
- Effective Date
- 26-May-2026
Overview
SIST EN IEC 61753-022-13:2026 specifies the performance requirements for multimode fibre optic connectors terminated as pigtails and patchcords, specifically designed for use in extended outdoor protected environments with additional heat dissipation (category OP+ HD). This standard, aligned with IEC 61753-1, defines the minimum initial testing and measurement requirements as well as test severities for ensuring compliance. The purpose is to ensure reliable performance and durability of fibre optic connectors used in challenging and thermally demanding outdoor applications, contributing to the long-term efficiency of optical networks.
Key Topics
- Performance Requirements: Establishes mandatory tests such as attenuation, return loss, and visual examination for connectors terminated as pigtails or patchcords.
- Test Methods: All measurement methods are harmonized with the IEC 61300 series, ensuring industry alignment and reliability in certification.
- Sample Size and Criteria: Details minimum sample sizes and specific pass/fail criteria, such as permissible attenuation, return loss values, and visual inspection standards for debris or mechanical defects.
- Environmental and Mechanical Reliability:
- Includes tests for cold, dry heat, composite temperature/humidity cycles, salt mist, and dust exposure.
- Covers mechanical tests like vibration, tensile strength, flexing, impact, cable retention, and torsion.
- Specific attention to outer cable sheath movement after tests for reinforced cable assemblies.
- Qualification: Products passing the OP+ HD category tests are also automatically qualified for categories OP+, OP, OPHD, C, and CHD, offering broader standard compliance through a single certification process.
Applications
- Outdoor Fibre Optic Installations: Essential for telecom and broadband infrastructure deployed in external protected environments exposed to variable weather and thermal conditions.
- Data Centers and Industrial Settings: Used where robust, reliable fibre connections with additional heat dissipation properties are critical for operational stability.
- Harsh Environments: Suitable for railway, utility, or strategic communications systems requiring connectors capable of enduring rigorous mechanical and environmental stress.
- Network Upgrades and Maintenance: Assures network operators that components meet or exceed international requirements, simplifying procurement and compliance processes.
By applying SIST EN IEC 61753-022-13:2026, organizations ensure that their multimode fibre optic connectors and assemblies:
- Deliver consistent optical performance.
- Minimize the risk of network outages due to connector failure.
- Are certified to withstand extended outdoor protected environments where additional heat is a factor.
Related Standards
SIST EN IEC 61753-022-13:2026 references multiple related standards for its test and performance requirements, ensuring comprehensive alignment with the wider fibre optics standards framework:
- IEC 61753-1: General performance standard for fibre optic interconnecting devices and passive components.
- IEC 61300 Series: Basic test and measurement procedures for fibre optic interconnecting devices and passive components.
- IEC 60793-2-10: Product specifications for multimode optical fibres.
- IEC 60874 Series: Detail specifications for various fibre optic connector types.
- IEC 61754 Series: Interface standards for fibre optic connectors.
- IEC 63267 Series: Standards for fibre optic connector optical interfaces and end face geometry.
Keywords: fibre optic connectors, multimode fibre, pigtails, patchcords, performance standard, outdoor environment, heat dissipation, IEC 61753-022-13, OP+ HD, optical network reliability, IEC standard compliance, environmental testing.
By following this standard, manufacturers and users of fibre optic interconnection devices ensure product quality, network resilience, and adherence to international best practices, especially in demanding outdoor and high-thermal environments.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN IEC 61753-022-13:2026 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Fibre optic interconnecting devices and passive components - Performance standard - Part 022-13: Multimode fibre optic connectors terminated as pigtails and patchcords for category OP+ HD- Extended outdoor protected environment with additional heat dissipation (IEC 61753-022-13:2026)". This standard covers: IEC 61753-022-13:2026 defines the minimum initial test and measurement requirements, and severities which multimode fibre optic connectors terminated as a pigtail or a patchcord satisfy in order to be categorized as meeting the IEC standard category OP+HP (Extended outdoor protected environment with additional heat dissipation), as defined in IEC 61753-1. If tests are performed on the connectors terminated as pigtails or patchcords for category OP+HP, and the product pass, the product will be automatically qualified or categorized as meeting the IEC standard for categories OP+, OP, OPHD, C and CHD.
IEC 61753-022-13:2026 defines the minimum initial test and measurement requirements, and severities which multimode fibre optic connectors terminated as a pigtail or a patchcord satisfy in order to be categorized as meeting the IEC standard category OP+HP (Extended outdoor protected environment with additional heat dissipation), as defined in IEC 61753-1. If tests are performed on the connectors terminated as pigtails or patchcords for category OP+HP, and the product pass, the product will be automatically qualified or categorized as meeting the IEC standard for categories OP+, OP, OPHD, C and CHD.
SIST EN IEC 61753-022-13:2026 is classified under the following ICS (International Classification for Standards) categories: 33.180.20 - Fibre optic interconnecting devices. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN IEC 61753-022-13:2026 has the following relationships with other standards: It is inter standard links to SIST EN 61754-30:2014, SIST EN 61754-15:2002, SIST EN 61754-9:2004, SIST EN 61754-10:2002, SIST EN 61754-19:2004, SIST EN 61754-34:2017, SIST EN 61754-18:2004, SIST EN 61300-3-6:2009, SIST EN 61754-1:2014, SIST EN 61754-6:1999/A2:2005, SIST EN IEC 63267-3-81:2025, SIST EN 61754-6:1999, SIST EN 61300-2-17:2011, SIST EN 61754-22:2006, SIST EN IEC 61300-2-22:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN IEC 61753-022-13:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61753-022-13:2024
01-september-2024
Optični spojni elementi in pasivne komponente - Tehnični standard - 022-13. del:
Konektorji za večmodna optična vlakna, kot repki ali povezovalne vrvice za
kategorijo OP+ HD - Razširjeno zunanje zaščiteno okolje z dodatnim odvajanjem
toplote
Fibre optic interconnecting devices and passive components - Performance standard -
Part 022-13: Multimode fibre optic connectors terminated as pigtails and patchcords for
category OP+ HD- Extended outdoor protected environment with additional heat
dissipation
Dispositifs d'interconnexion et composants passifs fibroniques - Norme de performance -
Partie 022-13: Connecteurs à fibres optiques multimodales raccordés comme des fibres
amorces et des cordons de brassage pour la catégorie OP+HD - Environnement
extérieur protégé étendu avec dissipation de chaleur supplémentaire
Ta slovenski standard je istoveten z: prEN IEC 61753-022-13:2024
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 61753-022-13:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN IEC 61753-022-13:2024
oSIST prEN IEC 61753-022-13:2024
86B/4905/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61753-022-13 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-05-17 2024-08-09
SUPERSEDES DOCUMENTS:
86B/4680/CD, 86B/4717A/CC
IEC SC 86B : FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
SECRETARIAT: SECRETARY:
Japan Mr Shigeru Tomita
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if any, in
this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of CENELEC,
is drawn to the fact that this Committee Draft for Vote (CDV) is
submitted for parallel voting.
The CENELEC members are invited to vote through the CENELEC
online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses to be
included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC c lauses.
(SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Fibre optic interconnecting devices and passive components - Performance standard - Part 022-13: Multimode
HD
fibre optic connectors terminated as pigtails and patchcords for category OP+ - Extended outdoor protected
environment with additional heat dissipation
PROPOSED STABILITY DATE: 2029
NOTE FROM TC/SC OFFICERS:
file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions. You may not copy
or "mirror" the file or printed version of the document, or any part of it, for any other purpose without permission in writi ng from IEC.
oSIST prEN IEC 61753-022-13:2024
86B/4905/CDV – 2 – IEC CDV 61753-022-13 © IEC 2024
CONTENTS
FOREWORD .3
1 Scope .5
2 Normative references .5
3 Terms and definitions .7
4 Test .7
5 Test report .8
6 Performance requirements .8
6.1 General .8
6.2 Dimensions .8
6.3 Sample size .8
6.4 Endface geometry .8
6.5 Visual examination .8
6.6 Pass/Fail criteria .9
6.7 Test details and requirements. 11
Annex A (normative) Sample size . 16
Annex B (normative) Visual examination of outer cable sheath movement . 17
B.1 Scope . 17
B.2 Preparation of the sample and initial visual examination . 17
B.3 Final visual examination of outer cable sheath movement . 17
Bibliography . 17
Figure 1 – Pigtail test sample .7
Figure 2 – Patchcord test sample .7
Figure B.1 – Example of initial marking of the cable sheath . 17
Figure B.2 – Example of final visual examination . 17
Table 1 – Pass/Fail criteria . 10
Table 2 –Test details and requirements . 11
Table A.1 – Sample Size . 16
oSIST prEN IEC 61753-022-13:2024
IEC CDV 61753-022-13 © IEC 2024 – 3 – 86B/4905/CDV
1 INTERNATIONAL ELECTROTECHNICAL COMMISSION
2 ____________
4 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS –
5 PERFORMANCE STANDARD –
7 Part 022-13: Multimode fibre optic connectors terminated as pigtails and
HD
8 patchcords for category OP+ - Extended outdoor protected environment with
9 additional heat dissipation
11 FOREWORD
12 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national
13 electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all
14 questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC
15 publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and
16 Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC
17 National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental
18 and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with
19 the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between
20 the two organizations.
21 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus
22 of opinion on the relevant subjects since each technical committee has representation from all interested IEC National
23 Committees.
24 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in
25 that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC
26 cannot be held responsible for the way in which they are used or for any misinterpretation by any end user.
27 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to
28 the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and
29 the corresponding national or regional publication shall be clearly indicated in the latter.
30 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment
31 services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by
32 independent certification bodies.
33 6) All users should ensure that they have the latest edition of this publication.
34 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its
35 technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature
36 whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of,
37 or reliance upon, this IEC Publication or any other IEC Publications.
38 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable
39 for the correct application of this publication.
40 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights.
41 IEC shall not be held responsible for identifying any or all such patent rights.
42 International Standard IEC 61753-022-13 has been prepared by subcommittee 86B: Fibre optic
43 interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
44 The text of this International Standard is based on the following documents:
FDIS Report on voting
XX/XX/FDIS XX/XX/RVD
oSIST prEN IEC 61753-022-13:2024
86B/4905/CDV – 4 – IEC CDV 61753-022-13 © IEC 2024
46 Full information on the voting for the approval of this International Standard can be found in the
47 report on voting indicated in the above table.
48 This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
49 The committee has decided that the contents of this document will remain unchanged until the
50 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
51 the specific document. At this date, the document will be
52 • reconfirmed,
53 • withdrawn,
54 • replaced by a revised edition, or
55 • amended.
57 The National Committees are requested to note that for this document the stability date
58 is 20XX.
59 THIS TEXT IS INCLUDED FOR THE INFORMATION OF THE NATIONAL COMMITTEES AND WILL BE DELETED
60 AT THE PUBLICATION STAGE.
oSIST prEN IEC 61753-022-13:2024
IEC CDV 61753-022-13 © IEC 2024 – 5 – 86B/4905/CDV
61 FIBRE OPTIC INTERCONNECTING DEVICES AND
62 PASSIVE COMPONENTS –PERFORMANCE STANDARD –
64 Part 022-13: Multimode fibre optic connectors terminated as pigtails and
HD
65 patchcords for category OP+ - Extended outdoor protected environment with
66 additional heat dissipation
68 1 Scope
69 This part of IEC 61753 contains the minimum requirements and severities which multimode
70 fibre optic connectors terminated as a pigtail and a patchcord need to meet in order to be
HD
71 categorized as meeting the IEC standard category OP+ (Extended outdoor protected
72 environment with additional heat dissipation), as defined in IEC 61753-1, If tests are performed
HD
73 on the connectors terminated as pigtails or patchcords for category OP+ , and the product
74 passes, the product will be automatically qualified or categorized as meeting the IEC standard
HD H
75 for categories OP+, OP, OP , C and C .
76 2 Normative references
77 The following documents are referred to in the text in such a way that some or all of their content
78 constitutes requirements of this document. For dated references, only the edition cited applies.
79 For undated references, the latest edition of the referenced document (including any
80 amendments) applies.
81 IEC 60793-2-10, Optical fibres – Part 2-10: Product specifications – Sectional specification for
82 category A1 multimode fibres
83 IEC 60794-2-50, Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex
84 and duplex cables for use in terminated cable assemblies
85 IEC 60874-14-1, Connectors for optical fibres and cables - Part 14-1: Detail specification for
86 fibre optic connector type SC/PC standard terminated to multimode fibre type A1a, A1b
87 IEC 60874-19-1, Fibre optic interconnecting devices and passive components - Connectors for
88 optical fibres and cables - Part 19-1: Fibre optic patch cord connector type SC-PC (floating
89 duplex) standard terminated on multimode fibre type A1a, A1b - Detail specification
90 IEC 61300-1, Fibre optic interconnecting devices and passive components – Basic test and
91 measurement procedures – Part 1 General and guidance
92 IEC 61300-2-1, Fibre optic interconnecting devices and passive components – Basic test and
93 measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)
94 IEC 61300-2-2, Fibre optic interconnecting devices and passive components – Basic test and
95 measurement procedures – Part 2-2: Tests – Mating durability
96 IEC 61300-2-4, Fibre optic interconnecting devices and passive components – Basic test and
97 measurement procedures – Part 2-4: Tests –Fibre or cable retention
98 IEC 61300-2-5, Fibre optic interconnecting devices and passive components – Basic test and
99 measurement procedures – Part 2-5: Tests – Torsion
100 IEC 61300-2-6, Fibre optic interconnecting devices and passive components – Basic test and
101 measurement procedures – Part 2-6: Tests – Tensile strength of coupling mechanism
102 IEC 61300-2-7, Fibre optic interconnecting devices and passive components – Basic test and
103 measurement procedures – Part 2-7: Tests – Bending moment
oSIST prEN IEC 61753-022-13:2024
86B/4905/CDV – 6 – IEC CDV 61753-022-13 © IEC 2024
104 IEC 61300-2-12, Fibre optic interconnecting devices and passive components – Basic test and
105 measurement procedures – Part 2-12: Tests – Impact
106 IEC 61300-2-17, Fibre optic interconnecting devices and passive components – Basic test and
107 measurement procedures – Part 2-17: Tests – Cold
108 IEC 61300-2-18, Fibre optic interconnecting devices and passive components – Basic test and
109 measurement procedures – Part 2-18: Tests – Dry heat
110 IEC 61300-2-21, Fibre optic interconnecting devices and passive components – Basic test and
111 measurement procedures – Part 2-21: Tests – Composite temperature/humidity cyclic test
112 IEC 61300-2-22, Fibre optic interconnecting devices and passive components – Basic test and
113 measurement procedures – Part 2-22: Tests – Change of temperature
114 IEC 61300-2-26, Fibre optic interconnecting devices and passive components – Basic test and
115 measurement procedures – Part 2-26: Tests – Salt mist
116 IEC 61300-2-27, Fibre optic interconnecting devices and passive components – Basic test and
117 measurement procedures – Part 2-27: Tests – Dust – Laminar flow
118 IEC 61300-2-44, Fibre optic interconnecting devices and passive components – Basic test and
119 measurement procedures – Part 2-44: Tests – Flexing of the strain relief of fibre optic devices
120 IEC 61300-2-50, Fibre optic interconnecting devices and passive components – Basic test and
121 measurement procedures – Part 2-50: Tests – Fibre optic connector proof test with static load
122 – Singlemode and multimode
123 IEC 61300-3-1, Fibre optic interconnecting devices and passive components – Basic test and
124 measurement procedures – Part 3-1: Examinations and measurements - Visual examination
125 IEC 61300-3-3, Fibre optic interconnecting devices and passive components – Basic test and
126 measurement procedures – Part 3-3: Examinations and measurements – Active monitoring of
127 changes in attenuation and in return loss
128 IEC 61300-3-4, Fibre optic interconnecting devices and passive components – Basic test and
129 measurement procedures – Part 3-4: Examinations and measurements – Attenuation
130 IEC 61300-3-6, Fibre optic interconnecting devices and passive components – Basic test and
131 measurement procedures – Part 3-6: Examinations and measurements – Return loss
132 IEC 61300-3-28, Fibre optic interconnecting devices and passive components – Basic test and
133 measurement procedures – Part 3-28: Examinations and measurements – Transient loss
134 IEC 61300-3-34, Fibre optic interconnecting devices and passive components – Basic test and
135 measurement procedures – Part 3-34: Examinations and measurements – Attenuation of
136 random mated connectors
137 IEC 61300-3-35, Fibre optic interconnecting devices and passive components - Basic test and
138 measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of
139 fibre optic connectors and fibre-stub transceivers
140 IEC 61300-3-45, Fibre optic interconnecting devices and passive components – Basic test and
141 measurement procedures – Part 3-45: Examinations and measurements – Attenuation of
142 random mated multi-fibre connectors
143 IEC 61754 (all parts), Fibre optic connector interfaces
144 IEC 63267-2 (all parts), Fibre optic interconnecting devices and passive components – Fibre
145 optic connector optical interfaces- Part 2: Multimode Optical Interface
146 IEC 63267-3 (all parts), Fibre optic interconnecting devices and passive components - Fibre
147 optic connector optical interfaces - Part 3: End face geometry
oSIST prEN IEC 61753-022-13:2024
IEC CDV 61753-022-13 © IEC 2024 – 7 – 86B/4905/CDV
148 3 Terms and definitions
149 For the purposes of this document, the terms and definitions given in IE
...