Fibre optic connector interfaces -- Part 19: Type SG connector family

EN following parallel vote

Steckgesichter von Lichtwellenleiter-Steckverbindern -- Teil 19: Steckverbinderfamilie der Bauart SG

Interfaces de connecteurs pour fibres optiques -- Partie 19: Famille de connecteurs de type SG

Définit les dimensions des interfaces normalisées pour la famille de connecteurs de type SG.

Konektorski vmesniki optičnihvlaken – 19-.del: Družina konektorjev tipa SG (IEC 61754-19:2001)*

General Information

Status
Published
Publication Date
31-Aug-2004
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2004
Due Date
01-Sep-2004
Completion Date
01-Sep-2004

Buy Standard

Standard
SIST EN 61754-19:2004
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI SIST EN 61754-19:2004
STANDARD
september 2004
Konektorski vmesniki optičnihvlaken – 19-.del: Družina konektorjev tipa SG
(IEC 61754-19:2001)*
Fibre optic connector interfaces - Part 19: Type SG connector family (IEC 61754-
19:2001)
ICS 33.180.20 Referenčna številka
SIST EN 61754-19:2004(en)

© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 61754-19
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2002
ICS 33.180.20
English version
Fibre optic connector interfaces
Part 19: Type SG connector family
(IEC 61754-19:2001)
Interfaces de connecteurs Steckgesichter von Lichtwellenleiter-
pour fibres optiques Steckverbindern
Partie 19: Famille de connecteurs Teil 19: Steckverbinderfamilie
de type SG der Bauart SG
(CEI 61754-19:2001) (IEC 61754-19:2001)

This European Standard was approved by CENELEC on 2001-12-01. CENELEC members are bound to

comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CENELEC member into its own language and

notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,

Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,

Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61754-19:2002 E
---------------------- Page: 2 ----------------------
EN 61754-19:2002 - 2 -
Foreword

The text of document 86B/1575/FDIS, future edition 1 of IEC 61754-19, prepared by SC 86B, Fibre optic

interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the

IEC-CENELEC parallel vote and was approved by CENELEC as EN 61754-9 on 2001-12-01.

The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-12-01

The International Electrotechnical Commission (IEC) and CENELEC draw attention to the fact that it is

claimed that compliance with this International Standard/European Standard may involve the use of a

patent concerning SG connectors.

The IEC and CENELEC take no position concerning the evidence, validity and scope of this patent

right.

The holder of this patent right has assured the IEC that he is willing to negotiate licences under

reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this

respect, the statement of the holder of this patent right is registered with the IEC. Information may be

obtained from:
Minnesota Mining and Manufacturing Company (3M)
Building A 130-2N-34
6801 River Place Boulevard
Austin TX 78726-9000

Attention is drawn to the possibility that some of the elements of this International Standard/European

Standard may be the subject of patent rights other than those identified above. IEC and CENELEC

shall not be held responsible for identifying any or all such patent rights.
__________
Endorsement notice

The text of the International Standard IEC 61754-19:2001 was approved by CENELEC as a European

Standard without any modification.
__________
---------------------- Page: 3 ----------------------
NORME
CEI
INTERNATIONALE IEC
61754-19
INTERNATIONAL
Première édition
STANDARD
First edition
2001-10
Interfaces de connecteurs pour fibres optiques –
Partie 19:
Famille de connecteurs de type SG
Fibre optic connector interfaces –
Part 19:
Type SG connector family
© IEC 2001 Droits de reproduction réservés ⎯ Copyright - all rights reserved

Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in

utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,

électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in

microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 4 ----------------------
61754-19 © IEC:2001 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC CONNECTOR INTERFACES –
Part 19: Type SG connector family
FOREWORD

1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, the IEC publishes International Standards. Their preparation is

entrusted to technical committees; any IEC National Committee interested in the subject dealt with may

participate in this preparatory work. International, governmental and non-governmental organizations liaising

with the IEC also participate in this preparation. The IEC collaborates closely with the International

Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two

organizations.

2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an

international consensus of opinion on the relevant subjects since each technical committee has representation

from all interested National Committees.

3) The documents produced have the form of recommendations for international use and are published in the form

of standards, technical specifications, technical reports or guides and they are accepted by the National

Committees in that sense.

4) In order to promote international unification, IEC National Committees undertake to apply IEC International

Standards transparently to the maximum extent possible in their national and regional standards. Any

divergence between the IEC Standard and the corresponding national or regional standard shall be clearly

indicated in the latter.

5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any

equipment declared to be in conformity with one of its standards.

The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance

with this International Standard may involve the use of a patent concerning SG connectors.

The IEC takes no position concerning the evidence, validity and scope of this patent right.

The holder of this patent right has assured the IEC that he is willing to negotiate licences under reasonable and

non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the

holder of this patent right is regi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.