SIST EN 61754-18:2004

Fibre optic connector interfaces -- Part 18: Type MT-RJ connector family

Defines the standard interface dimensions for the type MT-RJ family of connectors.

Steckgesichter von LWL-Steckverbindern -- Teil 18: Steckverbinderfamilie der Bauart MT-RJ

Interfaces de connecteurs pour fibres optiques -- Partie 18: Famille de connecteurs de type MT-RJ

En anglais seulement.

Konektorski vmesniki optičnih vlaken – 18. del: Družina konektorjev tipa MT-RJ (IEC 61754-18:2001)*

General Information

• Status: Published
• Publication Date: 31-Aug-2004
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: iTEL - Communication cables
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2004
• Due Date: 01-Sep-2004
• Completion Date: 01-Sep-2004
• Ref Project: EN 61754-18:2002 - Fibre optic connector interfaces - Part 18: Type MT-RJ connector family

Standards Content (Sample)

SIST EN 61754-18:2004SLOVENSKIseptember 2004
STANDARDKonektorski vmesniki optičnih vlaken – 18. del: Družina konektorjev tipa MT-RJ (IEC 61754-18:2001)*Fibre optic connector interfaces - Part 18: Type MT-RJ connector family (IEC 61754-18:2001)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 61754-18:2004(en)ICS33.180.20







EUROPEAN STANDARDEN 61754-18NORME EUROPÉENNEEUROPÄISCHE NORMFebruary 2002CENELECEuropean Committee for Electrotechnical StandardizationComité Européen de Normalisation ElectrotechniqueEuropäisches Komitee für Elektrotechnische NormungCentral Secretariat: rue de Stassart 35, B - 1050 Brussels© 2002 CENELEC -All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.Ref. No. EN 61754-18:2002 EICS 33.180.20English versionFibre optic connector interfacesPart 18: Type MT-RJ connector family(IEC 61754-18:2001)Interfaces de connecteurspour fibres optiquesPartie 18: Famille de connecteursde type MT-RJ(CEI 61754-18:2001)Steckgesichter von LWL-SteckverbindernTeil 18: Steckverbinderfamilieder Bauart MT-RJ(IEC 61754-18:2001)This European Standard was approved by CENELEC on 2002-03-01. CENELEC members are bound tocomply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained onapplication to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any otherlanguage made by translation under the responsibility of a CENELEC member into its own language andnotified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.



EN 61754-18:2002- 2 -ForewordThe text of document 86B/1594/FDIS, future edition 1 of IEC 61754-18, prepared by SC 86B, Fibre opticinterconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to theIEC-CENELEC parallel vote and was approved by CENELEC as EN 61754-18 on 2002-03-01.The following dates were fixed:–latest date by which the EN has to be implementedat national level by publication of an identicalnational standard or by endorsement(dop)2002-12-01–latest date by which the national standards conflictingwith the EN have to be withdrawn(dow)2005-03-01__________Endorsement noticeThe text of the International Standard IEC 61754-18:2001 was approved by CENELEC as a EuropeanStandard without any modification.__________



INTERNATIONALSTANDARDIEC61754-18First edition2001-12Fibre optic connector interfaces –Part 18:Type MT-RJ connector familyInterfaces de connecteurs pour fibres optiques –Partie 18:Famille de connecteurs de type MT-RJPRICE CODE© IEC 2001
⎯
Copyright - all rights reservedNo part of this publication may be reproduced or utilized in any form or by any means, electronic ormechanical, including photocopying and microfilm, without permission in writing from the publisher.International Electrotechnical Commission3, rue de Varembé
Geneva, SwitzerlandTelefax: [phone]e-mail: [e-mail] IEC web site
http://www.iec.chRFor price, see current catalogue Commission Electrotechnique Internationale International Electrotechnical Commission



– 2 –61754-18 © IEC:2001(E)CONTENTS1Scope.42Description.43Interfaces.4Figure 1a – Plug connector interface – without guide pins.6Figure 1b – Plug connector interface, without guide pins – Optical datum targetlocation diagram.8Figure 1c – Plug connector interface without guide pins – Gauge pin.9Figure 1d – Plug connector interface without guide pins – Plug gauge.10Figure 2 – Plug connector interface – with guide pins.11Figure 3 – Adaptor connector interface.13Figure 4 – Receptacle connector interface – without ribs.15Figure 5 – Receptacle connector interface – with ribs.17Table 1a – Plug connector interface dimensions – without guide pins.7Table 1b – Tolerance grade table.7Table 1c – Dimensions of gauge pin.9Table 1d – Dimensions of plug gauge.10Table 2a – Plug connector interface dimensions – with guide pins.12Table 2b – Tolerance grade table.12Table 3 – Adaptor connector interface dimensions.14Table 4a – Receptacle connector interface dimensions – without ribs.16Table 4b – Tolerance grade table.16Table 5a – Receptacle connector interface dimensions – with ribs.18Table 5b – Tolerance grade table.18



61754-18 © IEC:2001(E)– 3 –INTERNATIONAL ELECTROTECHNICAL COMMISSION___________FIBRE OPTIC CONNECTOR INTERFACES –Part 18: Type MT-RJ connector familyFOREWORD1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory work. International, governmental and non-governmental organizations liaisingwith the IEC also participate in this preparation. The IEC collaborates closely with the InternationalOrganization for Standardization (ISO) in accordance with conditions determined by agreement between thetwo organizations.2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, aninternational consensus of opinion on the relevant subjects since each technical committee has representationfrom all interested National Committees.3)The documents produced have the form of recommendations for international use and are published in the formof standards, technical specifications, technical reports or guides and they are accepted by the NationalCommittees in that sense.4)
In order to promote international unification, IEC National Committees undertake to apply IEC InternationalStandards transparently to the maximum extent possible in their national and regional standards. Anydivergence between the IEC Standard and the corresponding national or regional standard shall be clearlyindicated in the latter.5)
The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with one of its standards.6)
Attention is drawn to the possibility that some of the elements of this International Standard may be the subjectof patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 61754-18 has been prepared by subcommit
...