SIST EN 2267-012:2015
(Main)Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 012: DZ family, single UV laser printable for use in low pressure atmosphere - Product standard
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 012: DZ family, single UV laser printable for use in low pressure atmosphere - Product standard
This European Standard specifies the characteristics of UV laser printable electrical wires DZ family for use in the on board:
- 115 V (phase to neutral) or 200 V (phase to phase) electrical network of aircraft.
- 230 V (phase to neutral) or 400 V (phase to phase) electrical network of aircraft and particularly use in non-pressurized areas.
This cable family is used at operating temperature between -65 °C and 260 °C. These cables are demonstrated to be arc resistant for both networks (115 V and 230 V).
It shall also be possible to mark these cables by qualified compatible marking. These markings shall satisfy the requirements of EN 3838.
Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen -55 °C und 260 °C - Teil 012: DZ-Familie, einadrige Leitungen, UV-Laser-bedruckbar, für Anwendung bei niedrigem Luftdruck - Produktnorm
This European Standard specifies the characteristics of UV laser printable electrical wires DZ family for use in the on board:
115 V (phase to neutral) or 200 V (phase to phase) electrical network of aircraft.
230 V (phase to neutral) or 400 V (phase to phase) electrical network of aircraft and particularly use in non-pressurized areas.
This cable family is used at operating temperature between 65 °C and 260 °C. These cables are demonstrated to be arc resistant for both networks (115 V and 230 V).
It shall also be possible to mark these cables by qualified compatible marking. These markings shall satisfy the requirements of EN 3838.
Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre -55 °C et 260 °C - Partie 012 : Famille DZ, fil simple marquable au laser UV pour emploi en basse pression - Norme de produit
La présente Norme Européenne spécifie les caractéristiques de la famille de fils électriques marquables au laser UV DZ pour utilisation dans les systèmes à bord :
- réseau électrique d’aéronef 115 V (phase à neutre) ou 200 V (phase à phase) ;
- réseau électrique d’aéronef 230 V (phase à neutre) ou 400 V (phase à phase) et utilisation spécifique en zones non pressurisées.
La température de fonctionnement de cette famille de câbles est comprise entre 65 °C et 260 °C. Ces câbles ont démontré leur résistance aux arcs électriques sur les deux réseaux (115 V et 230 V).
Il doit également être possible de marquer ces câbles à l’aide d’un marquage compatible qualifié. Ces marquages doivent satisfaire aux exigences de l’EN 3838.
Aeronavtika - Električni kabli za splošno uporabo - Delovne temperature med –55 °C in 260 °C - 012. del: Družina DZ, enožilni kabli z možnostjo UV-laserskega tiskanja za uporabo pri atmosferi z nizkim tlakom - Standard za proizvod
Ta evropski standard določa značilnosti električnih kablov družine DZ z možnostjo UV-laserskega tiskanja za uporabo v:
– 115 V (fazna napetost) ali 200 V (medfazna napetost) električnih omrežjih na letalih;
– 230 V (fazna napetost) ali 400 V (medfazna napetost) električnih omrežjih na letalih in zlasti v prostorih, ki niso pod tlakom.
Ta družina kablov se uporablja pri obratovalnih temperaturah med −65 °C in 260 °C. Ti kabli so dokazano odporni proti obloku za obe omrežji (115 V in 230 V).
Te kable je mogoče označiti s kvalificirano združljivo oznako. Te oznake morajo biti v skladu z zahtevami standarda EN 3838.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.ODVHUVNHJDURL]YRGLuft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen -55 °C und 260 °C - Teil 012: DZ-Familie, einadrige Leitungen, UV-Laser-bedruckbar, für Anwendung bei niedrigem Luftdruck - ProduktnormSérie aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre -55 °C et 260 °C - Partie 012 : Famille DZ, fil simple marquable au laser UV pour emploi en basse pression - Norme de produitAerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 012: DZ family, single UV laser printable for use in low pressure atmosphere - Product standard49.060Aerospace electric equipment and systems29.060.20KabliCablesICS:Ta slovenski standard je istoveten z:EN 2267-012:2015SIST EN 2267-012:2015en,fr,de01-oktober-2015SIST EN 2267-012:2015SLOVENSKI
STANDARD
SIST EN 2267-012:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2267-012
July 2015 ICS 49.060 English Version
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 012: DZ family, single UV laser printable for use in low pressure atmosphere - Product standard
Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre -55 °C et 260 °C - Partie 012 : Famille DZ, fil simple marquable au laser UV pour emploi en basse pression - Norme de produit Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen -55 °C und 260 °C - Teil 012: DZ-Familie, einadrige Leitungen, UV-Laser-bedruckbar, für Anwendung bei niedrigem Luftdruck -Produktnorm This European Standard was approved by CEN on 7 February 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2267-012:2015 ESIST EN 2267-012:2015
EN 2267-012:2015 (E) 2 Contents
Page European foreword .3 1 Scope .4 2 Normative references .4 3 Terms, definitions and symbols .6 4 Materials and construction .6 5 Required characteristics .8 6 Quality assurance . 10 7 Designation . 11 8 Identification and marking . 11 9 Packaging, labelling and delivery lengths . 11 10 Technical specification . 11
SIST EN 2267-012:2015
EN 2267-012:
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.