SIST EN 61286:2003
(Main)Information technology - Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange
Information technology - Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange
Specifies a standardized coded graphic character set for use in drawings and diagrams, and for the design of graphical symbols. Edition 2 describes the correspondence between this character set and that of ISO/IEC 10646-1.
Informationstechnik - Codierter Zeichensatz zur Anwendung in der Erstellung von Dokumenten der Elektrotechnik und zum Datenaustausch
Technologie de l'information - Jeu de caractères graphiques codés pour emploi dans l'établissement de documents utilisés en électrotechnique et pour échange de l'information
Spécifie un jeu de caractères graphiques codés normalisés employés dans les dessins, et les schémas, et pour la conception de symboles. L'édition 2 décrit également la correspondance entre ce jeu de caractères et celui de l'ISO/CEI 10646-1.
Information technology - Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange (IEC 61286:2001, modified)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2003
1DGRPHãþD
SIST EN 61286:1997
Information technology - Coded graphic character set for use in the preparation of
documents used in electrotechnology and for information interchange (IEC
61286:2001, modified)
Information technology - Coded graphic character set for use in the preparation of
documents used in electrotechnology and for information interchange
Informationstechnik - Codierter Zeichensatz zur Anwendung in der Erstellung von
Dokumenten der Elektrotechnik und zum Datenaustausch
Technologie de l'information - Jeu de caractères graphiques codés pour emploi dans
l'établissement de documents utilisés en électrotechnique et pour échange de
l'information
Ta slovenski standard je istoveten z: EN 61286:2002
ICS:
35.040 Nabori znakov in kodiranje Character sets and
informacij information coding
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61286
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2002
ICS 01.080.10; 29.020; 35.020 Supersedes EN 61286:1995
English version
Information technology -
Coded graphic character set for use in the preparation
of documents used in electrotechnology
and for information interchange
(IEC 61286:2001, modified)
Technologie de l'information - Informationstechnik -
Jeu de caractères graphiques codés Codierter Zeichensatz zur Anwendung
pour emploi dans l'établissement de in der Erstellung von Dokumenten der
documents utilisés en électrotechnique Elektrotechnik und zum Datenaustausch
et pour échange de l'information (IEC 61286:2001, modifiziert)
(CEI 61286:2001, modifiée)
This European Standard was approved by CENELEC on 2002-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61286:2002 E
Foreword
The text of the International Standard IEC 61286:2001, prepared by SC 3B, Documentation, of
IEC TC 3, Information structures, documentation and graphical symbols, together with the
common modifications prepared by CENELEC Reporting Secretariat SR 3B, was submitted to
the formal vote and was approved by CENELEC as EN 61286 on 2002-09-01.
This European Standard supersedes EN 61286:1995.
The following dates were fixed:
- latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-09-01
- latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-09-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes A and ZA are normative and annexes B and C are informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC IEC 61286:2001 was approved by CENELEC as a
European Standard with agreed common modifications as given below.
COMMON MODIFICATIONS
2 Normative references
Replace the existing references by:
ISO/IEC 10367:1991 + technical corrigendum 1:2001, Information technology –
Standardized coded graphic character sets for use in 8-bits codes
ISO/IEC 10646-1:2000, Information technology – Universal Multiple-Octet Coded Character
Set (UCS) – Part 1: Architecture and basic multilingual plane
ISO 2375:1985, Data processing – Procedure for registration of escape sequences
- 3 - EN 61286:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
Publication Year Title EN/HD Year
ISO/IEC 10367 1991 Information technology - - -
+ corr. July 2001 Standardized coded graphic
character sets for use in 8-bit codes
ISO/IEC 10646-1 2000 Information technology - Universal - -
Multiple-Octet Coded Character
Set (UCS)
Part 1: Architecture and basic
multilingual plane
ISO 2375 1985 Data processing - Procedure for - -
registration of escape sequences
NORME CEI
INTERNATIONALE IEC
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2001-07
Technologie de l'information – Jeu de
caractères graphiques codés pour emploi
dans l'établissement de documents utilisés
en électrotechnique et pour échange
de l'information
Information technology – Coded graphic
character set for use in the preparation
of documents used in electrotechnology
and for information interchange
IEC 2001 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
N
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue
61286 © IEC:2001(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INFORMATION TECHNOLOGY – CODED GRAPHIC CHARACTER SET
FOR USE IN THE PREPARATION OF DOCUMENTS USED IN
ELECTROTECHNOLOGY AND FOR INFORMATION INTERCHANGE
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical specifications, technical reports or guides and they are accepted by the National
Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61286 has been prepared by subcommittee 3B: Documentation, of
IEC technical committee 3: Information structures, documentation and graphical symbols, in
close co-operation with subcommittee 2: Coded character sets, of ISO/IEC joint technical
committee 1: Information technology.
This second edition supersedes edition 1. It is technically identical to edition 1. It includes a
new informative annex (annex C) which was submitted as document 3B/302/CDV.
The text of this standard is based on the following documents:
Documents Report on voting
3B(CO)55 and 3B(CO)57 and
3B/302/CDV 3B/326/RVC
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
The committee has decided that the content of this publication will remain unchanged until
ISO/IEC 10646-1 can be considered to be sufficiently well established. At this date,
IEC 61286 will be withdrawn. For the correspondence between IEC 61286 and
ISO/IEC 10646-1, see Annex C (informative).
Annex A forms an integral part of this standard. The annexes B and C are for information
only.
61286 © IEC:2001(E) – 5 –
INFORMATION TECHNOLOGY – CODED GRAPHIC CHARACTER SET
FOR USE IN THE PREPARATION OF DOCUMENTS USED IN
ELECTROTECHNOLOGY AND FOR INFORMATION INTERCHANGE
1 Scope
This International Standard specifies a standardized coded graphic character set for use in
drawings and diagrams, and for the design of graphical symbols.
2 Normative references
The following normative documents contain provisions, which, through reference in this text,
constitute provisions of this International Standard. For dated references, subsequent
amendments to, or revisions of, any of these publications do not apply. However, parties to
agreements based on this International Standard are encouraged to investigate the possibility
of applying the most recent editions of the normative documents indicated below. For undated
references, the latest edition of the normative document referred to apply. Members of IEC
and ISO maintain registers of currently valid International Standards.
ISO/IEC 10367:1991, Information technology – Standardized coded graphic character sets for
use in 8-bit codes
ISO 1375:1985, Data processing – Procedure for registration of escape sequences.
3 Specification of a character set
Symbols of IEC 60617, letter symbols of IEC 60027 and ISO 31 are used in characters in
texts in the preparation of documents used in electrotechnology (see IEC 61082) and for the
design of graphical symbols.
In the computer processing of electrotechnical documents, such characters should, in
accordance with the rules defined in ISO/IEC 10367, be chosen from technical character set
No. 1, with the registration number 181. Technical character set No. 1 is reproduced in
annex A.
61286 © IEC:2001(E) – 7 –
– 8 – 61286 © CEI:2001(E)
61286 © IEC:2001(E) – 9 –
61286 © IEC:2001(E) – 11 –
61286 © IEC:2001(E) – 13 –
61286 © IEC:2001(E) – 15 –
61286 © IEC:2001(E) – 17 –
61286 © IEC:2001(E) – 19 –
Annex C
(informative)
Correspondence between Annex A and ISO/IEC 10646-1:2000
C.1 General
IEC 61286 was developed to cover the needs for graphical symbols of IEC 60617, letter
symbols of IEC 60027 and ISO 31 for use in texts appearing in documents used in
electrotechnology (see IEC 61082), and for use in labels appearing in graphical symbols.
The defined character set is primarily used in computer-aided design tools used in this area
and information exchange. At the time of publication these tools did usually not manage more
than single-octet character sets.
Since the time of publication of IEC 61286 Ed. 1 (1995), ISO/IEC 10646-1 has been
developed to cover also many of the needs in computer-aided design, and is expected to
become the general standard also in this area.
IEC 61286 will therefore be withdrawn as soon as the computer-aided tools are generally
capable to manage the multi-octet character set.
Table 1 describes the correspondence between the character set of Annex A of IEC 61286
and ISO/IEC 10646-1. The characters, ordered aft
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.