Precast concrete products - General rules for factory production control of metallic fibered concrete

This document defines the general rules for factory production control of metallic fibre concrete.
This document does not specify the conformity control procedure for the finished metallic fibre concrete products, for which reference should be made to European product standards or, if none, to the technical specifications defined and agreed between the customer and the manufacturer.

Betonfertigteile - Allgemeine Regeln für die werkseigene Produktionskontrolle von Beton mit metallischen Fasern

Dieses Dokument legt die allgemeinen Regeln für die werkseigene Produktionskontrolle für Beton mit
metallischen Fasern fest.
Dieses Dokument legt nicht das Verfahren zur Konformitätskontrolle für fertige Bauteile aus Beton mit
metallischen Fasern fest. Für diese sollte auf europäische Produktnormen oder, falls solche nicht vorliegen,
auf technische Spezifikationen, die zwischen Hersteller und Abnehmer festgelegt und vereinbart werden,
Bezug genommen werden.

Produits préfabriqués en béton - Regles générales pour le contrôle de la production en usine de béton de fibres métalliques

Le présent document définit les regles générales de contrôle de la production en usine de béton de fibres métalliques.
Le présent document ne précise pas la procédure de contrôle de conformité des produits finis en béton de fibres métalliques, pour lesquels il convient de faire référence aux Normes européennes "produits" ou, a défaut, aux spécifications techniques définies en concertation entre le client et le fabricant.

Montažni betonski izdelki – Splošna pravila za notranjo kontrolo proizvodnje betona s kovinskimi vlakni

General Information

Status
Published
Publication Date
30-Jun-2005
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jul-2005
Due Date
01-Jul-2005
Completion Date
01-Jul-2005

Buy Standard

Standard
EN 14650:2005
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14650:2005
01-julij-2005
Montažni betonski izdelki – Splošna pravila za notranjo kontrolo proizvodnje
betona s kovinskimi vlakni
Precast concrete products - General rules for factory production control of metallic
fibered concrete
Betonfertigteile - Allgemeine Regeln für die werkseigene Produktionskontrolle von Beton
mit metallischen Fasern
Produits préfabriqués en béton - Regles générales pour le contrôle de la production en
usine de béton de fibres métalliques
Ta slovenski standard je istoveten z: EN 14650:2005
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 14650:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14650:2005

---------------------- Page: 2 ----------------------

SIST EN 14650:2005
EUROPEAN STANDARD
EN 14650
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2005
ICS 91.100.30
English version
Precast concrete products - General rules for factory production
control of metallic fibered concrete
Produits préfabriqués en béton - Règles générales pour le Betonfertigteile - Allgemeine Regeln für die werkseigene
contrôle de la production en usine de béton de fibres Produktionskontrolle von Beton mit metallischen Fasern
métalliques
This European Standard was approved by CEN on 3 April 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14650:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14650:2005
EN 14650:2005 (E)
Contents
Page
Foreword .3
1 Scope.4
2 Normative references.4
3 Concrete production requirements .4
3.1 General.4
3.2 Storage of materials.4
3.3 Batching of constituent materials.4
4 Factory production control.4
4.1 General.4
4.2 Equipment inspection.5
4.3 Materials inspection.5
4.4 Production process inspection.5
4.5 Finished product inspection.5
Annex A (normative) Supplementary inspection schemes.6

2

---------------------- Page: 4 ----------------------

SIST EN 14650:2005
EN 14650:2005 (E)
Foreword
This European Standard (EN 14650:2005) has been prepared by Technical Committee
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.