SIST EN 301 502 V12.1.1:2015
(Main)Global System for Mobile communications (GSM) - Harmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R&TTE Directive
Global System for Mobile communications (GSM) - Harmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R&TTE Directive
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), Article 3.2,
which states that "….. radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In regards to interference to systems operating in adjacent bands guidance for single carrier BTS and multicarrier BTS
is provided in ECC Report 146 [i.4].
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [i.2] may apply to equipment within the scope of the present
document.
Globalni sistem mobilnih komunikacij (GSM) - Harmonizirani EN za opremo za bazne postaje, ki zajema bistvene zahteve člena 3.2 direktive R&TTE
Ta dokument zajema določbe člena 3(2) Direktive 1999/5/ES [i.2] (direktive R&TTE), ki določa, da »[...] mora biti radijska oprema skonstruirana tako, da učinkovito uporablja spekter, razporejen za prizemne/vesoljske radijske komunikacije in orbitalne vire, tako da ne pride do škodljivega motenja.«
Kar zadeva motnje sistemov, ki delujejo v sosednjih pasovih, so v Poročilo 146 Odbora za elektronske komunikacije [i.4] vključena navodila za enega ali več operaterjev baznih sprejemno-oddajnih postaj (BTS).
Poleg tega dokumenta se lahko za opremo na področju uporabe tega dokumenta uporabljajo tudi drugi standardi EN, ki določajo tehnične zahteve v zvezi z bistvenimi zahtevami iz drugih delov člena 3 direktive R&TTE [i.2].
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.7(Global System for Mobile communications (GSM) - Harmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R&TTE Directive33.070.50Globalni sistem za mobilno telekomunikacijo (GSM)Global System for Mobile Communication (GSM)ICS:Ta slovenski standard je istoveten z:EN 301 502 V12.1.1SIST EN 301 502 V12.1.1:2015en01-oktober-2015SIST EN 301 502 V12.1.1:2015SLOVENSKI
STANDARD
SIST EN 301 502 V12.1.1:2015
ETSI EN 301 502 V12.1.1 (2015-03) Global System for Mobile communications (GSM); Harmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R&TTE Directive
HARMONIZED EUROPEAN STANDARD SIST EN 301 502 V12.1.1:2015
ETSI ETSI EN 301 502 V12.1.1 (2015-03) 2
Reference REN/MSG-0017 Keywords base station, cellular, ER-GSM, GSM, R-GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2015. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 502 V12.1.1:2015
ETSI ETSI EN 301 502 V12.1.1 (2015-03) 3 Contents Intellectual Property Rights . 7 Foreword . 7 Modal verbs terminology . 7 Introduction . 7 1 Scope . 8 2 References . 8 2.1 Normative references . 8 2.2 Informative references . 10 3 Definitions and abbreviations . 11 3.1 Definitions . 11 3.2 Abbreviations . 13 4 Technical requirements specifications . 14 4.1 Environmental profile . 14 4.2 Conformance requirements . 15 4.2.1 Void . 15 4.2.1a Introduction. 16 4.2.2 Mean transmitted RF carrier power . 16 4.2.2.1 Definition . 16 4.2.2.2 Limit . 16 4.2.2.3 Conformance . 17 4.2.3 Void . 17 4.2.4 Adjacent channel power . 17 4.2.4.1 Spectrum due to modulation and wideband noise . 17 4.2.4.1.1 Definition. 17 4.2.4.1.2 Limit . 17 4.2.4.1.3 Conformance . 19 4.2.4.2 Switching transients spectrum . 19 4.2.4.2.1 Definition. 19 4.2.4.2.2 Limit . 19 4.2.4.2.3 Conformance . 20 4.2.5 Spurious emissions from the transmitter antenna connector . 20 4.2.5.1 Conducted spurious emissions from the transmitter antenna connector, inside the BTS transmit band . 20 4.2.5.1.1 Definition. 20 4.2.5.1.2 Limit . 20 4.2.5.1.3 Conformance . 20 4.2.5.2 Conducted spurious emissions from the transmitter antenna connector, outside the BTS transmit band . 20 4.2.5.2.1 Definition. 20 4.2.5.2.2 Limit . 20 4.2.5.2.3 Conformance . 21 4.2.5.3 Conducted spurious emissions from the transmitter antenna connector, in 3G bands outside the BTS transmit band . 22 4.2.5.3.1 Definition. 22 4.2.5.3.2 Limit . 22 4.2.5.3.3 Conformance . 22 4.2.6 Intermodulation attenuation . 22 4.2.6.1 Definition . 22 4.2.6.2 Limit . 22 4.2.6.2.1 For BTS not belonging to a multicarrier BTS class . 22 4.2.6.2.2 For BTS belonging to a multicarrier BTS class . 22 4.2.6.3 Conformance . 23 4.2.7 Intra Base Station System intermodulation attenuation . 23 4.2.7.1 Definition . 23 SIST EN 301 502 V12.1.1:2015
ETSI ETSI EN 301 502 V12.1.1 (2015-03) 4 4.2.7.2 Limit . 23 4.2.7.2.1 For BTS not belonging to a multicarrier BTS class . 23 4.2.7.2.2 For BTS belonging to a multicarrier BTS class . 23 4.2.7.3 Conformance . 23 4.2.8 Wideband noise and intra BSS intermodulation attenuation in multicarrier operation . 24 4.2.8.1 Definition . 24 4.2.8.2 Limit . 24 4.2.9 Void . 25 4.2.10 Void . 25 4.2.11 Reference Interference Level . 26 4.2.11.1 Definition . 26 4.2.11.2 Limit . 26 4.2.11.3 Conformance . 32 4.2.12 Blocking Characteristics . 32 4.2.12.1 Definition . 32 4.2.12.2 Limit . 33 4.2.12.2.1 Blocking . 33 4.2.12.2.2 Spurious response . 33 4.2.12.3 Conformance . 34 4.2.13 Intermodulation characteristics . 34 4.2.13.1 Definition . 34 4.2.13.2 Limit . 34 4.2.13.3 Conformance . 34 4.2.14 AM suppression . 34 4.2.14.1 Definition . 34 4.2.14.2 Limit . 34 4.2.14.3 Conformance . 34 4.2.15 Spurious emissions from the receiver antenna connector . 34 4.2.15.1 Definition . 34 4.2.15.2 Limit . 35 4.2.15.3 Conformance . 35 4.2.16 Radiated spurious emissions . 35 4.2.16.1 Definition . 35 4.2.16.2 Limit . 35 4.2.16.3 Conformance . 35 5 Testing for compliance with technical requirements . 35 5.1 Environmental conditions for testing . 35 5.2 Interpretation of the measurement results . 36 5.3 Essential radio test suites . 37 5.3.1 Void . 37 5.3.2 Mean transmitted RF carrier power . 37 5.3.2.1 Test case . 37 5.3.2.2 Test Environment . 38 5.3.3 Void . 38 5.3.4 Adjacent channel power . 38 5.3.4.1 Spectrum due to modulation and wideband noise . 38 5.3.4.1.1 Test case . 38 5.3.4.1.2 Test Environment . 39 5.3.4.2 Switching transients spectrum . 39 5.3.4.2.1 Test case . 39 5.3.4.2.2 Test Environment . 40 5.3.5 Spurious emissions from the transmitter antenna connector . 40 5.3.5.1 Conducted spurious emissions from the transmitter antenna connector, inside the BTS transmit band . 40 5.3.5.1.1 Test case . 40 5.3.5.1.2 Test Environment . 40 5.3.5.2 Conducted spurious emissions from the transmitter antenna connector, outside the BTS transmit band . 41 5.3.5.2.1 For BTS not belonging to a multicarrier BTS class . 41 5.3.5.2.2 For BTS belonging to a multicarrier BTS class . 42 SIST EN 301 502 V12.1.1:2015
ETSI ETSI EN 301 502 V12.1.1 (2015-03) 5 5.3.5.3 Conducted spurious emissions from the transmitter antenna connector, in 3G bands outside the BTS transmit band . 43 5.3.5.3.1 Test case . 44 5.3.5.3.2 Test Environment . 44 5.3.6 Intermodulation attenuation . 44 5.3.6.1 Test case . 44 5.3.6.2 Test Environment . 46 5.3.7 Intra Base Station System intermodulation attenuation . 46 5.3.7.1 Test case . 46 5.3.7.2 Test Environment . 47 5.3.8 Wideband noise and intra BSS intermodulation attenuation in multicarrier operation . 47 5.3.8.1 Test case . 47 5.3.8.2 Test Environment . 49 5.3.9 Void . 50 5.3.10 Void . 50 5.3.11 Reference Interference Level . 50 5.3.11.1 Test case . 50 5.3.11.2 Test Environment . 58 5.3.12 Blocking Characteristics . 58 5.3.12.1 Test case . 58 5.3.12.2 Test Environment . 64 5.3.13 Intermodulation characteristics . 64 5.3.13.1 Test case . 64 5.3.13.2 Test Environment . 65 5.3.14 AM suppression . 65 5.3.14.1 Test case . 65 5.3.14.2 Test Environment . 67 5.3.15 Spurious emissions from the receiver antenna connector . 67 5.3.15.1 Test case . 67 5.3.15.2 Test Environment . 67 5.3.16 Radiated spurious emissions . 68 5.3.16.1 Test case . 69 5.3.16.2 Test Environment . 70 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 71 Annex B (normative): General test conditions and declarations . 73 B.1 Declaration by manufacturer . 73 B.1.1 Output power and determination of power class . 73 B.1.2 Specified frequency range . 74 B.1.3 Frequency hopping . 74 B.1.4 Void . 74 B.1.5 Downlink discontinuous transmission (DTX) . 74 B.2 BTS Configurations . 74 B.2.1 Receiver diversity . 75 B.2.2 Duplexers . 75 B.2.3 Power supply options . 76 B.2.4 Ancillary RF amplifiers . 76 B.2.5 BSS using antenna arrays . 76 B.2.6 BTS supporting 8-PSK modulation . 78 B.2.7 BTS supporting additional modulations in EGPRS2 . 78 B.2.8 Supported Symbol Rate . 78 B.2.9 Support of RTTI and/or FANR . 78 B.2.10 Multicarrier BTS . 78 B.2.11 BTS supporting VAMOS . 79 B.2.12 BTS supporting ER-GSM . 80 Annex C (normative): Test environments . 81 C.1 Normal test environment . 81 SIST EN 301 502 V12.1.1:2015
ETSI ETSI EN 301 502 V12.1.1 (2015-03) 6 C.2 Extreme test environment .
...
ETSI EN 301 502 V12.1.1 (2015-03)
HARMONIZED EUROPEAN STANDARD
Global System for Mobile communications (GSM);
Harmonized EN for Base Station Equipment covering the
essential requirements of article 3.2 of the R&TTE Directive
---------------------- Page: 1 ----------------------
2 ETSI EN 301 502 V12.1.1 (2015-03)
Reference
REN/MSG-0017
Keywords
base station, cellular, ER-GSM, GSM, R-GSM
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2015.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 301 502 V12.1.1 (2015-03)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 10
3 Definitions and abbreviations . 11
3.1 Definitions . 11
3.2 Abbreviations . 13
4 Technical requirements specifications . 14
4.1 Environmental profile . 14
4.2 Conformance requirements . 15
4.2.1 Void . 15
4.2.1a Introduction. 16
4.2.2 Mean transmitted RF carrier power . 16
4.2.2.1 Definition . 16
4.2.2.2 Limit . 16
4.2.2.3 Conformance . 17
4.2.3 Void . 17
4.2.4 Adjacent channel power . 17
4.2.4.1 Spectrum due to modulation and wideband noise . 17
4.2.4.1.1 Definition. 17
4.2.4.1.2 Limit . 17
4.2.4.1.3 Conformance . 19
4.2.4.2 Switching transients spectrum . 19
4.2.4.2.1 Definition. 19
4.2.4.2.2 Limit . 19
4.2.4.2.3 Conformance . 20
4.2.5 Spurious emissions from the transmitter antenna connector . 20
4.2.5.1 Conducted spurious emissions from the transmitter antenna connector, inside the BTS transmit
band . 20
4.2.5.1.1 Definition. 20
4.2.5.1.2 Limit . 20
4.2.5.1.3 Conformance . 20
4.2.5.2 Conducted spurious emissions from the transmitter antenna connector, outside the BTS transmit
band . 20
4.2.5.2.1 Definition. 20
4.2.5.2.2 Limit . 20
4.2.5.2.3 Conformance . 21
4.2.5.3 Conducted spurious emissions from the transmitter antenna connector, in 3G bands outside the
BTS transmit band . 22
4.2.5.3.1 Definition. 22
4.2.5.3.2 Limit . 22
4.2.5.3.3 Conformance . 22
4.2.6 Intermodulation attenuation . 22
4.2.6.1 Definition . 22
4.2.6.2 Limit . 22
4.2.6.2.1 For BTS not belonging to a multicarrier BTS class . 22
4.2.6.2.2 For BTS belonging to a multicarrier BTS class . 22
4.2.6.3 Conformance . 23
4.2.7 Intra Base Station System intermodulation attenuation . 23
4.2.7.1 Definition . 23
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 301 502 V12.1.1 (2015-03)
4.2.7.2 Limit . 23
4.2.7.2.1 For BTS not belonging to a multicarrier BTS class . 23
4.2.7.2.2 For BTS belonging to a multicarrier BTS class . 23
4.2.7.3 Conformance . 23
4.2.8 Wideband noise and intra BSS intermodulation attenuation in multicarrier operation . 24
4.2.8.1 Definition . 24
4.2.8.2 Limit . 24
4.2.9 Void . 25
4.2.10 Void . 25
4.2.11 Reference Interference Level . 26
4.2.11.1 Definition . 26
4.2.11.2 Limit . 26
4.2.11.3 Conformance . 32
4.2.12 Blocking Characteristics . 32
4.2.12.1 Definition . 32
4.2.12.2 Limit . 33
4.2.12.2.1 Blocking . 33
4.2.12.2.2 Spurious response . 33
4.2.12.3 Conformance . 34
4.2.13 Intermodulation characteristics . 34
4.2.13.1 Definition . 34
4.2.13.2 Limit . 34
4.2.13.3 Conformance . 34
4.2.14 AM suppression . 34
4.2.14.1 Definition . 34
4.2.14.2 Limit . 34
4.2.14.3 Conformance . 34
4.2.15 Spurious emissions from the receiver antenna connector . 34
4.2.15.1 Definition . 34
4.2.15.2 Limit . 35
4.2.15.3 Conformance . 35
4.2.16 Radiated spurious emissions . 35
4.2.16.1 Definition . 35
4.2.16.2 Limit . 35
4.2.16.3 Conformance . 35
5 Testing for compliance with technical requirements . 35
5.1 Environmental conditions for testing . 35
5.2 Interpretation of the measurement results . 36
5.3 Essential radio test suites . 37
5.3.1 Void . 37
5.3.2 Mean transmitted RF carrier power . 37
5.3.2.1 Test case . 37
5.3.2.2 Test Environment . 38
5.3.3 Void . 38
5.3.4 Adjacent channel power . 38
5.3.4.1 Spectrum due to modulation and wideband noise . 38
5.3.4.1.1 Test case . 38
5.3.4.1.2 Test Environment . 39
5.3.4.2 Switching transients spectrum . 39
5.3.4.2.1 Test case . 39
5.3.4.2.2 Test Environment . 40
5.3.5 Spurious emissions from the transmitter antenna connector . 40
5.3.5.1 Conducted spurious emissions from the transmitter antenna connector, inside the BTS transmit
band . 40
5.3.5.1.1 Test case . 40
5.3.5.1.2 Test Environment . 40
5.3.5.2 Conducted spurious emissions from the transmitter antenna connector, outside the BTS transmit
band . 41
5.3.5.2.1 For BTS not belonging to a multicarrier BTS class . 41
5.3.5.2.2 For BTS belonging to a multicarrier BTS class . 42
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 301 502 V12.1.1 (2015-03)
5.3.5.3 Conducted spurious emissions from the transmitter antenna connector, in 3G bands outside the
BTS transmit band . 43
5.3.5.3.1 Test case . 44
5.3.5.3.2 Test Environment . 44
5.3.6 Intermodulation attenuation . 44
5.3.6.1 Test case . 44
5.3.6.2 Test Environment . 46
5.3.7 Intra Base Station System intermodulation attenuation . 46
5.3.7.1 Test case . 46
5.3.7.2 Test Environment . 47
5.3.8 Wideband noise and intra BSS intermodulation attenuation in multicarrier operation . 47
5.3.8.1 Test case . 47
5.3.8.2 Test Environment . 49
5.3.9 Void . 50
5.3.10 Void . 50
5.3.11 Reference Interference Level . 50
5.3.11.1 Test case . 50
5.3.11.2 Test Environment . 58
5.3.12 Blocking Characteristics . 58
5.3.12.1 Test case . 58
5.3.12.2 Test Environment . 64
5.3.13 Intermodulation characteristics . 64
5.3.13.1 Test case . 64
5.3.13.2 Test Environment . 65
5.3.14 AM suppression . 65
5.3.14.1 Test case . 65
5.3.14.2 Test Environment . 67
5.3.15 Spurious emissions from the receiver antenna connector . 67
5.3.15.1 Test case . 67
5.3.15.2 Test Environment . 67
5.3.16 Radiated spurious emissions . 68
5.3.16.1 Test case . 69
5.3.16.2 Test Environment . 70
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 71
Annex B (normative): General test conditions and declarations . 73
B.1 Declaration by manufacturer . 73
B.1.1 Output power and determination of power class . 73
B.1.2 Specified frequency range . 74
B.1.3 Frequency hopping . 74
B.1.4 Void . 74
B.1.5 Downlink discontinuous transmission (DTX) . 74
B.2 BTS Configurations . 74
B.2.1 Receiver diversity . 75
B.2.2 Duplexers . 75
B.2.3 Power supply options . 76
B.2.4 Ancillary RF amplifiers . 76
B.2.5 BSS using antenna arrays . 76
B.2.6 BTS supporting 8-PSK modulation . 78
B.2.7 BTS supporting additional modulations in EGPRS2 . 78
B.2.8 Supported Symbol Rate . 78
B.2.9 Support of RTTI and/or FANR . 78
B.2.10 Multicarrier BTS . 78
B.2.11 BTS supporting VAMOS . 79
B.2.12 BTS supporting ER-GSM . 80
Annex C (normative): Test environments . 81
C.1 Normal test environment . 81
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 301 502 V12.1.1 (2015-03)
C.2 Extreme test environment . 81
C.2.1 Extreme temperature .
...
Draft ETSI EN 301 502 V12.0.1 (2014-10)
Harmonized European Standard
Global System for Mobile communications (GSM);
Harmonized EN for Base Station Equipment covering the
essential requirements of article 3.2 of the R&TTE Directive
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 301 502 V12.0.1 (2014-10)
Reference
REN/MSG-0017
Keywords
base station, cellular, ER-GSM, GSM, R-GSM
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2014.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 301 502 V12.0.1 (2014-10)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 11
3 Definitions and abbreviations . 12
3.1 Definitions . 12
3.2 Abbreviations . 14
4 Technical requirements specifications . 16
4.1 Environmental profile . 16
4.2 Conformance requirements . 16
4.2.1 Void . 16
4.2.1a Introduction. 17
4.2.2 Mean transmitted RF carrier power . 17
4.2.2.1 Definition . 17
4.2.2.2 Limit . 17
4.2.2.3 Conformance . 18
4.2.3 Void . 18
4.2.4 Adjacent channel power . 18
4.2.4.1 Spectrum due to modulation and wideband noise . 18
4.2.4.1.1 Definition. 18
4.2.4.1.2 Limit . 18
4.2.4.1.3 Conformance . 20
4.2.4.2 Switching transients spectrum . 21
4.2.4.2.1 Definition. 21
4.2.4.2.2 Limit . 21
4.2.4.2.3 Conformance . 21
4.2.5 Spurious emissions from the transmitter antenna connector . 21
4.2.5.1 Conducted spurious emissions from the transmitter antenna connector, inside the BTS transmit
band . 21
4.2.5.1.1 Definition. 21
4.2.5.1.2 Limit . 21
4.2.5.1.3 Conformance . 21
4.2.5.2 Conducted spurious emissions from the transmitter antenna connector, outside the BTS transmit
band . 21
4.2.5.2.1 Definition. 22
4.2.5.2.2 Limit . 22
4.2.5.2.3 Conformance . 23
4.2.5.3 Conducted spurious emissions from the transmitter antenna connector, in 3G bands outside the
BTS transmit band . 23
4.2.5.3.1 Definition. 23
4.2.5.3.2 Limit . 23
4.2.5.3.3 Conformance . 23
4.2.6 Intermodulation attenuation . 23
4.2.6.1 Definition . 23
4.2.6.2 Limit . 23
4.2.6.2.1 For BTS not belonging to a multicarrier BTS class . 23
4.2.6.2.2 For BTS belonging to a multicarrier BTS class . 24
4.2.6.3 Conformance . 24
4.2.7 Intra Base Station System intermodulation attenuation . 24
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 301 502 V12.0.1 (2014-10)
4.2.7.1 Definition . 24
4.2.7.2 Limit . 25
4.2.7.2.1 For BTS not belonging to a multicarrier BTS class . 25
4.2.7.2.2 For BTS belonging to a multicarrier BTS class . 25
4.2.7.3 Conformance . 25
4.2.8 Wideband noise and intra BSS intermodulation attenuation in multicarrier operation . 25
4.2.8.1 Definition . 25
4.2.8.2 Limit . 25
4.2.9 Void . 27
4.2.10 Void . 27
4.2.11 Reference Interference Level . 27
4.2.11.1 Definition . 27
4.2.11.2 Limit . 27
4.2.11.3 Conformance . 33
4.2.12 Blocking Characteristics . 33
4.2.12.1 Definition . 34
4.2.12.2 Limit . 34
4.2.12.2.1 Blocking . 34
4.2.12.2.2 Spurious response . 35
4.2.12.3 Conformance . 35
4.2.13 Intermodulation characteristics . 35
4.2.13.1 Definition . 35
4.2.13.2 Limit . 35
4.2.13.3 Conformance . 35
4.2.14 AM suppression . 35
4.2.14.1 Definition . 35
4.2.14.2 Limit . 35
4.2.14.3 Conformance . 36
4.2.15 Spurious emissions from the receiver antenna connector . 36
4.2.15.1 Definition . 36
4.2.15.2 Limit . 36
4.2.15.3 Conformance . 36
4.2.16 Radiated spurious emissions . 36
4.2.16.1 Definition . 36
4.2.16.2 Limit . 36
4.2.16.3 Conformance . 36
5 Testing for compliance with technical requirements . 37
5.1 Environmental conditions for testing . 37
5.2 Interpretation of the measurement results . 37
5.3 Essential radio test suites . 38
5.3.1 Void . 38
5.3.2 Mean transmitted RF carrier power . 38
5.3.2.1 Test case . 38
5.3.2.2 Test Environment . 39
5.3.3 Void . 39
5.3.4 Adjacent channel power . 39
5.3.4.1 Spectrum due to modulation and wideband noise . 39
5.3.4.1.1 Test case . 39
5.3.4.1.2 Test Environment . 40
5.3.4.2 Switching transients spectrum . 40
5.3.4.2.1 Test case . 40
5.3.4.2.2 Test Environment . 41
5.3.5 Spurious emissions from the transmitter antenna connector . 41
5.3.5.1 Conducted spurious emissions from the transmitter antenna connector, inside the BTS transmit
band . 41
5.3.5.1.1 Test case . 41
5.3.5.1.2 Test Environment . 42
5.3.5.2 Conducted spurious emissions from the transmitter antenna connector, outside the BTS transmit
band . 42
5.3.5.2.1 For BTS not belonging to a multicarrier BTS class . 42
5.3.5.2.2 For BTS belonging to a multicarrier BTS class . 43
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 301 502 V12.0.1 (2014-10)
5.3.5.3 Conducted spurious emissions from the transmitter antenna connector, in 3G bands outside the
BTS transmit band . 45
5.3.5.3.1 Test case . 45
5.3.5.3.2 Test Environment . 46
5.3.6 Intermodulation attenuation . 46
5.3.6.1 Test case . 46
5.3.6.2 Test Environment . 47
5.3.7 Intra Base Station System intermodulation attenuation . 48
5.3.7.1 Test case . 48
5.3.7.2 Test Environment . 49
5.3.8 Wideband noise and intra BSS intermodulation attenuation in multicarrier operation . 49
5.3.8.1 Test case . 49
5.3.8.2 Test Environment . 51
5.3.9 Void . 51
5.3.10 Void . 51
5.3.11 Reference Interference Level . 51
5.3.11.1 Test case . 51
5.3.11.2 Test Environment . 59
5.3.12 Blocking Characteristics . 59
5.3.12.1 Test case . 59
5.3.12.2 Test Environment . 65
5.3.13 Intermodulation characteristics . 65
5.3.13.1 Test case . 65
5.3.13.2 Test Environment . 66
5.3.14 AM suppression . 66
5.3.14.1 Test case . 66
5.3.14.2 Test Environment . 68
5.3.15 Spurious emissions from the receiver antenna connector . 68
5.3.15.1 Test case . 68
5.3.15.2 Test Environment . 68
5.3.16 Radiated spurious emissions . 69
5.3.16.1 Test case . 70
5.3.16.2 Test Environment . 71
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 72
Annex B (normative): General test conditions and declarations . 74
B.1 Declaration by manufacturer . 74
B.1.1 Output power and determination of power class . 74
B.1.2 Specified frequency range . 75
B.1.3 Frequency hopping . 75
B.1.4 Void . 75
B.1.5 Downlink discontinuous transmission (DTX) . 75
B.2 BTS Configurations . 76
B.2.1 Receiver diversity . 76
B.2.2 Duplexers . 76
B.2.3 Power supply options . 77
B.2.4 Ancillary RF amplifiers . 77
B.2.5 BSS using antenna arrays . 78
B.2.6 BTS supporting 8-PSK modulation . 79
B.2.7 BTS supporting additional modulations in EGPRS2 . 79
B.2.8 Supported Symbol Rate . 79
B.2.9 Support of RTTI and/or FANR . 79
B.2.10 Multicarrier BTS . 80
B.2.11 BTS supporting VAMOS . 81
B.2.12 BTS supporting ER-GSM . 81
Annex C (normative): Test environments . 82
C.1 Normal test environment . 82
ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 301 502 V12.0.1 (2014-10)
C.2 Extreme test environment . 82
C.2.1 Extreme temperature .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.