SIST EN 301 908-2 V2.2.1:2004
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 2: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 2: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive
The second release of EN 301 908 will include BS Classification, Spurious Emissions, Unwanted Emissions, Low Chip Rate, High Speed Packet Access, Repeaters.
Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Bazne postaje (BS) in uporabniška oprema (UE) za celična omrežja tretje generacije IMT-2000 - 2. del: Harmonizirani EN za IMT-2000, CDMA z neposrednim razprševanjem (“Direct Spread”) (UTRA FDD) (UE), ki zajema bistvene zahteve člena 3.2 direktive R&TTE
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WUHWMHElectromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 2: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 301 908-2 Version 2.2.1SIST EN 301 908-2 V2.2.1:2004en01-julij-2004SIST EN 301 908-2 V2.2.1:2004SLOVENSKI
STANDARD
SIST EN 301 908-2 V2.2.1:2004
ETSI EN 301 908-2 V2.2.1 (2003-10)Candidate Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Base Stations (BS), Repeaters and User Equipment (UE) forIMT-2000 Third-Generation cellular networks;Part 2: Harmonized EN for IMT-2000,CDMA Direct Spread (UTRA FDD) (UE)covering essential requirementsof article 3.2 of the R&TTE Directive
SIST EN 301 908-2 V2.2.1:2004
ETSI ETSI EN 301 908-2 V2.2.1 (2003-10) 2
Reference REN/ERM-TFES-002-2 Keywords 3G, 3GPP, cellular, digital, IMT-2000, mobile, radio, regulation, UMTS, WCDMA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editor@etsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2003. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 301 908-2 V2.2.1:2004
ETSI ETSI EN 301 908-2 V2.2.1 (2003-10) 3
Contents Intellectual Property Rights.6 Foreword.6 Introduction.8 1 Scope.10 2 References.10 3 Definitions, symbols and abbreviations.11 3.1 Definitions.11 3.2 Symbols.12 3.3 Abbreviations.12 4 Technical requirements specifications.13 4.1 Environmental profile.13 4.2 Conformance requirements.13 4.2.1 Introduction.13 4.2.2 Transmitter maximum output power.13 4.2.2.1 Definition.13 4.2.2.2 Limits.13 4.2.2.3 Conformance.14 4.2.3 Transmitter spectrum emission mask.14 4.2.3.1 Definition.14 4.2.3.2 Limits.14 4.2.3.3 Conformance.14 4.2.4 Transmitter spurious emissions.14 4.2.4.1 Definition.14 4.2.4.2 Limits.14 4.2.4.3 Conformance.15 4.2.5 Transmitter minimum output power.15 4.2.5.1 Definition.15 4.2.5.2 Limits.15 4.2.5.3 Conformance.15 4.2.6 Receiver adjacent channel selectivity.15 4.2.6.1 Definition.15 4.2.6.2 Limits.16 4.2.6.3 Conformance.16 4.2.7 Receiver blocking characteristics.16 4.2.7.1 Definition.16 4.2.7.2 Limits.16 4.2.7.3 Conformance.17 4.2.8 Receiver spurious response.17 4.2.8.1 Definition.17 4.2.8.2 Limits.17 4.2.8.3 Conformance.17 4.2.9 Receiver intermodulation characteristics.17 4.2.9.1 Definition.17 4.2.9.2 Limits.18 4.2.9.3 Conformance.18 4.2.10 Receiver spurious emissions.18 4.2.10.1 Definition.18 4.2.10.2 Limits.18 4.2.10.3 Conformance.18 4.2.11 Out-of-synchronization handling of output power.19 4.2.11.1 Definition.19 4.2.11.2 Limits.19 4.2.11.3 Conformance.20 SIST EN 301 908-2 V2.2.1:2004
ETSI ETSI EN 301 908-2 V2.2.1 (2003-10) 4
4.2.12 Transmitter Adjacent Channel Leakage power Ratio.20 4.2.12.1 Definition.20 4.2.12.2 Limits.20 4.2.12.3 Conformance.21 5 Testing for compliance with technical requirements.21 5.1 Environmental conditions for testing.21 5.2 Interpretation of the measurement results.21 5.3 Essential radio test suites.23 5.3.1 Transmitter maximum output power.23 5.3.1.1 Method of test.23 5.3.1.1.1 Initial conditions.23 5.3.1.1.2 Procedure.23 5.3.1.2 Test requirements.23 5.3.2 Transmitter spectrum emission mask.23 5.3.2.1 Method of test.23 5.3.2.1.1 Initial conditions.23 5.3.2.1.2 Procedure.24 5.3.2.2 Test requirements.24 5.3.3 Transmitter spurious emissions.24 5.3.3.1 Method of test.24 5.3.3.1.1 Initial conditions.24 5.3.3.1.2 Procedure.24 5.3.3.2 Test requirements.24 5.3.4 Transmitter minimum output power.25 5.3.4.1 Method of test.25 5.3.4.1.1 Initial conditions.25 5.3.4.1.2 Procedure.25 5.3.4.2 Test requirements.25 5.3.5 Receiver adjacent channel selectivity (ACS).25 5.3.5.1 Method of test.25 5.3.5.1.1 Initial conditions.25 5.3.5.1.2 Procedure.25 5.3.5.2 Test requirements.25 5.3.6 Receiver blocking characteristics.26 5.3.6.1 Method of test.26 5.3.6.1.1 Initial requirements.26 5.3.6.1.2 Procedure.26 5.3.6.2 Test requirements.26 5.3.7 Receiver spurious response.26 5.3.7.1 Method of test.26 5.3.7.1.1 Initial conditions.26 5.3.7.1.2 Procedure.27 5.3.7.2 Test requirements.27 5.3.8 Receiver Intermodulation characteristics.27 5.3.8.1 Method of test.27 5.3.8.1.1 Initial conditions.27 5.3.8.1.2 Procedure.27 5.3.8.2 Test requirements.27 5.3.9 Receiver spurious emissions.28 5.3.9.1 Method of test.28 5.3.9.1.1 Initial conditions.28 5.3.9.1.2 Procedure.28 5.3.9.2 Test requirements.28 5.3.10 Out-of-synchronization handling of output power.28 5.3.10.1 Method of test.28 5.3.10.1.1 Initial conditions.28 5.3.10.1.2 Procedure.29 5.3.10.2 Test requirements.29 5.3.11 Transmitter adjacent channel leakage power ratio.29 5.3.11.1 Method of test.29 5.3.11.1.1 Initial conditions.29 SIST EN 301 908-2 V2.2.1:2004
ETSI ETSI EN 301 908-2 V2.2.1 (2003-10) 5
5.3.11.1.2 Procedure.29 5.3.11.2 Test requirements.29 Annex A (normative): EN Requirements Table (EN-RT).30 Annex B (informative): Environmental profile.31 B.1 General.31 B.1.1 Introduction.31 B.1.2 Temperature.31 B.1.3 Voltage.31 B.1.4 Test environment.32 Annex C (informative): Bibliography.33 Annex D (informative): The EN title in the official languages.34 History.35
SIST EN 301 908-2 V2.2.1:2004
ETSI ETSI EN 301 908-2 V2.2.1 (2003-10) 6
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive"). The present document is part 2 of a multi-part deliverable covering the Base Stations (BS), Repeater and User Equipment (UE) for IMT-2000 Third-Generation cellular networks, as identified below: Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive"; Part 2: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 3: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 4: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 5: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS and Repeater) covering essential requirements of article 3.2 of the R&TTE Directive";
Part 6: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 7: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 10: "Harmonized EN for IMT-2000 FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 11: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeater) covering essential requirements of article 3.2 of the R&TTE Directive". SIST EN 301 908-2 V2.2.1:2004
ETSI ETSI EN 301 908-2 V2.2.1 (2003-10) 7
Technical specifications relevant to Directive 1999/5/EC [1] are given in annex A of the present document and annex A of EN 301 908-1.
National transposition dates Date of adoption of this EN: 3 October 2003 Date of latest announcement of this EN (doa): 31 January 2004 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 July 2004 Date of withdrawal of any conflicting National Standard (dow): 31 January 2006
SIST EN 301 908-2 V2.2.1:2004
ETSI ETSI EN 301 908-2 V2.2.1 (2003-10) 8
Introduction The present document is part of a set of standards designed to fit in a modular structure to cover all radio and telecommunications terminal equipment under the R&TTE Directive [1]. Each standard is a module in the structure. The modular structure is shown in figure 1.
Use of spectrum * If needed scoped by
equipment
class or type Scoped by frequency and/or equipment type Disability* Privacy* Fraud* No harm to the network* Emergency* Interworking via
the network* Interworking with the network Non-radio Radio (RE) Non-TTE TTE 3.1b 3.2 3.3c 3.3b 3.3a 3.3d 3.3e 3.3f Radio Product EMC EN 301 489 multi-part EMC standard Generic and product standards also notified under EMC Directive Standards also notified under LV Directive 3.1a New radio harmonized standards Spectrum EMC Safety - If needed, new standards for human exposure to Electromagnetic Fields, - if needed, new standards for acoustic safety
Figure 1: Modular structure for the various standards used under the R&TTE Directive SIST EN 301 908-2 V2.2.1:2004
ETSI ETSI EN 301 908-2 V2.2.1 (2003-10) 9
The left hand edge of figure 1 shows the different clauses of article 3 of the R&TTE Directive [1]. For article 3.3 various horizontal boxes are shown. Dotted lines indicate that at the time of publication of the present document essential requirements in these areas have to be adopted by the Commission. If such essential requirements are adopted, and as far and as long as they are applicable, they will justify individual standards whose scope is likely to be specified by function or interface type. The vertical boxes show the standards under article 3.2 for the use of the radio spectrum by radio equipment. The scopes of these standards are specified either by frequency (normally in the case where frequency bands are harmonized) or by radio equipment type. For article 3.1b, figure 1 shows EN 301 489 [9], the multi-part product EMC standard for radio under the EMC Directive [2]. For article 3.1a, figure 1 shows the existing safety standards currently used under the LV Directive [3] and new standards covering human exposure to electromagnetic fields. New standards covering acoustic safety may also be required. The bottom of figure 1 shows the relationship of the standards to radio equipment and telecommunications terminal equipment. A particular equipment may be radio equipment, telecommunications terminal equipment or both. A radio spectrum standard will apply if it is radio equipment. An article 3.3 standard will apply as well only if the relevant essential requirement under the R&TTE Directive [1] is adopted by the Commission and if the equipment in question is covered by the scope of the corresponding standard. Thus, depending on the nature of the equipment, the essent
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.