SIST EN ISO 11199-2:2021/A1:2025
(Amendment)Assistive products for walking manipulated by both arms - Requirements and test methods - Part 2: Rollators - Amendment 1: Removal of brake requirements (ISO 11199 2:2021/Amd 1:2024)
Assistive products for walking manipulated by both arms - Requirements and test methods - Part 2: Rollators - Amendment 1: Removal of brake requirements (ISO 11199 2:2021/Amd 1:2024)
This document specifies requirements and test methods of rollators being used as assistive products for walking with wheels, manipulated by both arms, without accessories, unless specified in the particular test procedure. This document also gives requirements relating to safety, ergonomics, performance and information supplied by the manufacturer including marking and labelling.
The requirements and tests are based on every-day use of rollators as assistive products for walking for a maximum user mass as specified by the manufacturer. This document includes rollators specified for a user mass of no less than 35 kg.
This document is not applicable to rollators with horizontal forearm supports, classified as walking tables, for which ISO 11199-3 is applicable.
Technische Hilfen zum Gehen für beidarmige Handhabung - Anforderungen und Prüfverfahren - Teil 2: Rollatoren - Änderung 1: Streichung der Anforderungen an die Bremsen (ISO 11199 2:2021/Amd 1:2024)
Produits d’assistance à la marche manipulés avec les deux bras - Exigences et méthodes d’essai - Partie 2: Déambulateurs - Amendement 1: Suppression des exigences relatives aux freins (ISO 11199 2:2021/Amd 1:2024)
Pripomočki za hojo, ki se upravljajo z obema rokama - Zahteve in preskusne metode - 2. del: Rolatorji - Dopolnilo A1: Odprava zahtev za zavore (ISO 11199 2:2021/Amd 1:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2025
Pripomočki za hojo, ki se upravljajo z obema rokama - Zahteve in preskusne
metode - 2. del: Rolatorji - Dopolnilo A1: Odprava zahtev za zavore (ISO 11199
2:2021/Amd 1:2024)
Assistive products for walking manipulated by both arms - Requirements and test
methods - Part 2: Rollators - Amendment 1: Removal of brake requirements (ISO 11199
2:2021/Amd 1:2024)
Technische Hilfen zum Gehen für beidarmige Handhabung - Anforderungen und
Prüfverfahren - Teil 2: Rollatoren - Änderung 1: Streichung der Anforderungen an die
Bremsen (ISO 11199 2:2021/Amd 1:2024)
Produits d’assistance à la marche manipulés avec les deux bras - Exigences et
méthodes d’essai - Partie 2: Déambulateurs - Amendement 1: Suppression des
exigences relatives aux freins (ISO 11199 2:2021/Amd 1:2024)
Ta slovenski standard je istoveten z: EN ISO 11199-2:2021/A1:2024
ICS:
11.180.10 Pripomočki in prilagoditve za Aids and adaptation for
gibanje moving
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 11199-2:2021/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2024
EUROPÄISCHE NORM
ICS 11.180.10
English Version
Assistive products for walking manipulated by both arms -
Requirements and test methods - Part 2: Rollators -
Amendment 1: Removal of brake requirements (ISO 11199
2:2021/Amd 1:2024)
Produits d'assistance à la marche manipulés avec les Technische Hilfen zum Gehen für beidarmige
deux bras - Exigences et méthodes d'essai - Partie 2: Handhabung - Anforderungen und Prüfverfahren - Teil
Déambulateurs - Amendement 1: Suppression des 2: Rollatoren - Änderung 1: Streichung der
exigences relatives aux freins (ISO 11199 2:2021/Amd Anforderungen an die Bremsen (ISO 11199
1:2024) 2:2021/Amd 1:2024)
This amendment A1 modifies the European Standard EN ISO 11199-2:2021; it was approved by CEN on 8 July 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11199-2:2021/A1:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 11199-2:2021/A1:2024) has been prepared by Technical Committee ISO/TC
173 "Assistive products" in collaboration with Technical Committee CEN/TC 293 “Assistive products
and accessibility” the secretariat of which is held by SIS.
This Amendment to the European Standard EN ISO 11199-2:2021 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2025, and
conflicting national standards shall be withdrawn at the latest by June 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Roma
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.